The CHIPREV macro simply expands to the macro argument so it is redundant and as such removed.
Reviewed-by: Roland Vossen <[email protected]> Signed-off-by: Arend van Spriel <[email protected]> --- drivers/staging/brcm80211/include/bcmdefs.h | 1 - drivers/staging/brcm80211/sys/wlc_bmac.c | 2 +- drivers/staging/brcm80211/sys/wlc_mac80211.c | 2 +- drivers/staging/brcm80211/util/aiutils.c | 2 +- drivers/staging/brcm80211/util/hndpmu.c | 8 ++++---- drivers/staging/brcm80211/util/siutils.c | 8 ++++---- 6 files changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/staging/brcm80211/include/bcmdefs.h b/drivers/staging/brcm80211/include/bcmdefs.h index 8235612..74601fc 100644 --- a/drivers/staging/brcm80211/include/bcmdefs.h +++ b/drivers/staging/brcm80211/include/bcmdefs.h @@ -51,7 +51,6 @@ #define SPI_BUS 6 /* gSPI target */ #define RPC_BUS 7 /* RPC target */ -#define CHIPREV(rev) (rev) /* Defines for DMA Address Width - Shared between OSL and HNDDMA */ #define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */ diff --git a/drivers/staging/brcm80211/sys/wlc_bmac.c b/drivers/staging/brcm80211/sys/wlc_bmac.c index b28dfb3..79ee24f 100644 --- a/drivers/staging/brcm80211/sys/wlc_bmac.c +++ b/drivers/staging/brcm80211/sys/wlc_bmac.c @@ -408,7 +408,7 @@ bool BCMFASTPATH wlc_dpc(wlc_info_t *wlc, bool bounded) printk_once("%s : PSM Watchdog, chipid 0x%x, chiprev 0x%x\n", __func__, wlc_hw->sih->chip, - CHIPREV(wlc_hw->sih->chiprev)); + wlc_hw->sih->chiprev); WLCNTINCR(wlc->pub->_cnt->psmwds); diff --git a/drivers/staging/brcm80211/sys/wlc_mac80211.c b/drivers/staging/brcm80211/sys/wlc_mac80211.c index f64a9e8..9aae340 100644 --- a/drivers/staging/brcm80211/sys/wlc_mac80211.c +++ b/drivers/staging/brcm80211/sys/wlc_mac80211.c @@ -6428,7 +6428,7 @@ void wlc_high_dpc(wlc_info_t *wlc, u32 macintstatus) printk_once("%s : PSM Watchdog, chipid 0x%x, chiprev 0x%x\n", __func__, wlc->pub->sih->chip, - CHIPREV(wlc->pub->sih->chiprev)); + wlc->pub->sih->chiprev); WLCNTINCR(wlc->pub->_cnt->psmwds); diff --git a/drivers/staging/brcm80211/util/aiutils.c b/drivers/staging/brcm80211/util/aiutils.c index d3234d3..cad7a69 100644 --- a/drivers/staging/brcm80211/util/aiutils.c +++ b/drivers/staging/brcm80211/util/aiutils.c @@ -31,7 +31,7 @@ #include <bcmdevs.h> #define BCM47162_DMP() ((sih->chip == BCM47162_CHIP_ID) && \ - (CHIPREV(sih->chiprev) == 0) && \ + (sih->chiprev == 0) && \ (sii->coreid[sii->curidx] == MIPS74K_CORE_ID)) /* EROM parsing */ diff --git a/drivers/staging/brcm80211/util/hndpmu.c b/drivers/staging/brcm80211/util/hndpmu.c index 4096264..a2191bc 100644 --- a/drivers/staging/brcm80211/util/hndpmu.c +++ b/drivers/staging/brcm80211/util/hndpmu.c @@ -1360,7 +1360,7 @@ static void si_pmu1_pllinit0(si_t *sih, struct osl_info *osh, chipcregs_t *cc, si_pmu_set_4330_plldivs(sih); if ((sih->chip == BCM4329_CHIP_ID) - && (CHIPREV(sih->chiprev) == 0)) { + && (sih->chiprev == 0)) { W_REG(osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); tmp = R_REG(osh, &cc->pllcontrol_data); @@ -1442,7 +1442,7 @@ static void si_pmu1_pllinit0(si_t *sih, struct osl_info *osh, chipcregs_t *cc, ((xt->xf << PCTL_XTALFREQ_SHIFT) & PCTL_XTALFREQ_MASK); if ((sih->chip == BCM4329_CHIP_ID) - && CHIPREV(sih->chiprev) == 0) { + && sih->chiprev == 0) { /* clear the htstretch before clearing HTReqEn */ AND_REG(osh, &cc->clkstretch, ~CSTRETCH_HT); tmp &= ~PCTL_HT_REQ_EN; @@ -1707,7 +1707,7 @@ u32 si_pmu_si_clock(si_t *sih, struct osl_info *osh) PMU5_MAINPLL_SI); break; case BCM4329_CHIP_ID: - if (CHIPREV(sih->chiprev) == 0) + if (sih->chiprev == 0) clock = 38400 * 1000; else clock = si_pmu1_cpuclk0(sih, osh, cc); @@ -2561,7 +2561,7 @@ void si_pmu_swreg_init(si_t *sih, struct osl_info *osh) 0xe); /* Reduce LNLDO1 output voltage to 1.2V */ si_pmu_set_ldo_voltage(sih, osh, SET_LDO_VOLTAGE_LNLDO1, 0xe); - if (CHIPREV(sih->chiprev) == 0) + if (sih->chiprev == 0) si_pmu_regcontrol(sih, 2, 0x400000, 0x400000); break; diff --git a/drivers/staging/brcm80211/util/siutils.c b/drivers/staging/brcm80211/util/siutils.c index a63e1b0..7f9e170 100644 --- a/drivers/staging/brcm80211/util/siutils.c +++ b/drivers/staging/brcm80211/util/siutils.c @@ -593,7 +593,7 @@ static si_info_t *si_doattach(si_info_t *sii, uint devid, struct osl_info *osh, ((sih->chip == BCM43236_CHIP_ID || sih->chip == BCM43235_CHIP_ID || sih->chip == BCM43238_CHIP_ID) - && (CHIPREV(sii->pub.chiprev) <= 2))) { + && (sii->pub.chiprev <= 2))) { if ((cc->chipstatus & CST43236_BP_CLK) != 0) { uint clkdiv; @@ -652,7 +652,7 @@ static si_info_t *si_doattach(si_info_t *sii, uint devid, struct osl_info *osh, if ((sih->chip == BCM43224_CHIP_ID) || (sih->chip == BCM43421_CHIP_ID)) { /* enable 12 mA drive strenth for 43224 and set chipControl register bit 15 */ - if (CHIPREV(sih->chiprev) == 0) { + if (sih->chiprev == 0) { SI_MSG(("Applying 43224A0 WARs\n")); si_corereg(sih, SI_CC_IDX, offsetof(chipcregs_t, chipcontrol), @@ -661,7 +661,7 @@ static si_info_t *si_doattach(si_info_t *sii, uint devid, struct osl_info *osh, si_pmu_chipcontrol(sih, 0, CCTRL_43224A0_12MA_LED_DRIVE, CCTRL_43224A0_12MA_LED_DRIVE); } - if (CHIPREV(sih->chiprev) >= 1) { + if (sih->chiprev >= 1) { SI_MSG(("Applying 43224B0+ WARs\n")); si_pmu_chipcontrol(sih, 0, CCTRL_43224B0_12MA_LED_DRIVE, CCTRL_43224B0_12MA_LED_DRIVE); @@ -1042,7 +1042,7 @@ void si_watchdog(si_t *sih, uint ticks) if (PMUCTL_ENAB(sih)) { if ((sih->chip == BCM4319_CHIP_ID) && - (CHIPREV(sih->chiprev) == 0) && (ticks != 0)) { + (sih->chiprev == 0) && (ticks != 0)) { si_corereg(sih, SI_CC_IDX, offsetof(chipcregs_t, clk_ctl_st), ~0, 0x2); si_setcore(sih, USB20D_CORE_ID, 0); -- 1.7.1 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
