Fix checkpatch complains.
The change of the DBGPRINT_ERR macro causes the change on the callers.
Signed-off-by: L. Alberto Giménez <agime...@sysvalve.es>
---
drivers/staging/rt2860/chip/rtmp_phy.h | 14 ++++++------
drivers/staging/rt2860/common/ba_action.c | 6 ++--
drivers/staging/rt2860/common/cmm_data.c | 2 +-
drivers/staging/rt2860/common/cmm_mac_pci.c | 10 ++++----
drivers/staging/rt2860/common/cmm_mac_usb.c | 2 +-
drivers/staging/rt2860/common/cmm_wpa.c | 22 +++++++-----------
drivers/staging/rt2860/common/ee_efuse.c | 15 +++++++++---
drivers/staging/rt2860/common/mlme.c | 13 +++++------
drivers/staging/rt2860/common/rt_rf.c | 3 +-
drivers/staging/rt2860/common/rtmp_init.c | 24 ++++++++-----------
drivers/staging/rt2860/common/rtmp_mcu.c | 4 +-
drivers/staging/rt2860/common/spectrum.c | 2 +-
drivers/staging/rt2860/pci_main_dev.c | 2 +-
drivers/staging/rt2860/rt_linux.c | 21 ++++++++---------
drivers/staging/rt2860/rt_linux.h | 6 +----
drivers/staging/rt2860/rt_main_dev.c | 2 +-
drivers/staging/rt2860/rt_usb.c | 32 +++++++++++++-------------
drivers/staging/rt2860/sta/assoc.c | 2 +-
drivers/staging/rt2860/sta/auth.c | 3 +-
drivers/staging/rt2860/sta/connect.c | 3 +-
drivers/staging/rt2860/sta/rtmp_data.c | 2 +-
drivers/staging/rt2860/sta/sync.c | 6 ++--
drivers/staging/rt2860/usb_main_dev.c | 12 +++++-----
23 files changed, 99 insertions(+), 109 deletions(-)
diff --git a/drivers/staging/rt2860/chip/rtmp_phy.h
b/drivers/staging/rt2860/chip/rtmp_phy.h
index 9f924ea..98454df 100644
--- a/drivers/staging/rt2860/chip/rtmp_phy.h
+++ b/drivers/staging/rt2860/chip/rtmp_phy.h
@@ -247,7 +247,7 @@
} \
} \
if (BbpCsr.field.Busy == BUSY) { \
- DBGPRINT_ERR(("BBP(viaMCU=%d) read R%d fail\n",
(_bViaMCU), _bbpID)); \
+ DBGPRINT_ERR("BBP(viaMCU=%d) read R%d fail\n",
(_bViaMCU), _bbpID); \
*(_pV) = (_pAd)->BbpWriteLatch[_bbpID]; \
if ((_bViaMCU) == TRUE) { \
RTMP_IO_READ32(_pAd, _regID, &BbpCsr.word);
\
@@ -336,11 +336,11 @@
} \
} \
} else { \
- DBGPRINT_ERR((" , brt30xxBanMcuCmd = %d, Read BBP %d \n",
(_A)->brt30xxBanMcuCmd, (_I))); \
+ DBGPRINT_ERR(" , brt30xxBanMcuCmd = %d, Read BBP %d \n",
(_A)->brt30xxBanMcuCmd, (_I)); \
*(_pV) = (_A)->BbpWriteLatch[_I]; \
} \
if ((BbpCsr.field.Busy == BUSY) || ((_A)->bPCIclkOff == TRUE)) { \
- DBGPRINT_ERR(("BBP read R%d=0x%x fail\n", _I, BbpCsr.word)); \
+ DBGPRINT_ERR("BBP read R%d=0x%x fail\n", _I, BbpCsr.word); \
*(_pV) = (_A)->BbpWriteLatch[_I]; \
} \
}
@@ -378,7 +378,7 @@
break; \
} \
if (_busyCnt == MAX_BUSY_COUNT) { \
- DBGPRINT_ERR(("BBP write R%d fail\n", _bbpID)); \
+ DBGPRINT_ERR("BBP write R%d fail\n", _bbpID); \
if ((_bViaMCU) == TRUE) { \
RTMP_IO_READ32(_pAd, H2M_BBP_AGENT,
&BbpCsr.word); \
BbpCsr.field.Busy = 0; \
@@ -459,15 +459,15 @@
break;
\
}
\
} else { \
- DBGPRINT_ERR((" brt30xxBanMcuCmd = %d. Write BBP %d
\n", (_A)->brt30xxBanMcuCmd, (_I))); \
+ DBGPRINT_ERR(" brt30xxBanMcuCmd = %d. Write BBP %d
\n", (_A)->brt30xxBanMcuCmd, (_I)); \
}
\
if ((BusyCnt == MAX_BUSY_COUNT) || ((_A)->bPCIclkOff == TRUE))
{ \
if (BusyCnt == MAX_BUSY_COUNT)
\
(_A)->AccessBBPFailCount++;
\
- DBGPRINT_ERR(("BBP write R%d=0x%x fail. BusyCnt=
%d.bPCIclkOff = %d. \n", _I, BbpCsr.word, BusyCnt, (_A)->bPCIclkOff)); \
+ DBGPRINT_ERR("BBP write R%d=0x%x fail. BusyCnt=
%d.bPCIclkOff = %d. \n", _I, BbpCsr.word, BusyCnt, (_A)->bPCIclkOff); \
}
\
} else { \
- DBGPRINT_ERR(("****** BBP_Write_Latch Buffer exceeds max
boundry ****** \n")); \
+ DBGPRINT_ERR("****** BBP_Write_Latch Buffer exceeds max boundry
****** \n"); \
}
\
}
#endif /* RTMP_MAC_PCI // */
diff --git a/drivers/staging/rt2860/common/ba_action.c
b/drivers/staging/rt2860/common/ba_action.c
index 8eef82d..d432b7e 100644
--- a/drivers/staging/rt2860/common/ba_action.c
+++ b/drivers/staging/rt2860/common/ba_action.c
@@ -1270,13 +1270,13 @@ BOOLEAN CntlEnqueueForRecv(struct rt_rtmp_adapter *pAd,
/* First check the size, it MUST not exceed the mlme queue size */
if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
- DBGPRINT_ERR(("CntlEnqueueForRecv: frame too large, size = %ld
\n", MsgLen));
+ DBGPRINT_ERR("CntlEnqueueForRecv: frame too large, size = %ld
\n", MsgLen);
return FALSE;
} else if (MsgLen != sizeof(struct rt_frame_ba_req)) {
- DBGPRINT_ERR(("CntlEnqueueForRecv: BlockAck Request frame
length size = %ld incorrect\n", MsgLen));
+ DBGPRINT_ERR("CntlEnqueueForRecv: BlockAck Request frame length
size = %ld incorrect\n", MsgLen);
return FALSE;
} else if (MsgLen != sizeof(struct rt_frame_ba_req)) {
- DBGPRINT_ERR(("CntlEnqueueForRecv: BlockAck Request frame
length size = %ld incorrect\n", MsgLen));
+ DBGPRINT_ERR("CntlEnqueueForRecv: BlockAck Request frame length
size = %ld incorrect\n", MsgLen);
return FALSE;
}
diff --git a/drivers/staging/rt2860/common/cmm_data.c
b/drivers/staging/rt2860/common/cmm_data.c
index 93a5347..2204c2b 100644
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -1366,7 +1366,7 @@ void RTMPResumeMsduTransmission(struct rt_rtmp_adapter
*pAd)
/* R66 should not be 0 */
if (pAd->BbpTuning.R66CurrentValue == 0) {
pAd->BbpTuning.R66CurrentValue = 0x38;
- DBGPRINT_ERR(("RTMPResumeMsduTransmission,
R66CurrentValue=0...\n"));
+ DBGPRINT_ERR("RTMPResumeMsduTransmission,
R66CurrentValue=0...\n");
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66,
diff --git a/drivers/staging/rt2860/common/cmm_mac_pci.c
b/drivers/staging/rt2860/common/cmm_mac_pci.c
index e26ba49..850f0fb 100644
--- a/drivers/staging/rt2860/common/cmm_mac_pci.c
+++ b/drivers/staging/rt2860/common/cmm_mac_pci.c
@@ -89,7 +89,7 @@ int RTMPAllocTxRxRingMemory(struct rt_rtmp_adapter *pAd)
if (pAd->TxDescRing[num].AllocVa == NULL) {
ErrorValue = ERRLOG_OUT_OF_SHARED_MEMORY;
- DBGPRINT_ERR(("Failed to allocate a big
buffer\n"));
+ DBGPRINT_ERR("Failed to allocate a big
buffer\n");
Status = NDIS_STATUS_RESOURCES;
break;
}
@@ -121,7 +121,7 @@ int RTMPAllocTxRxRingMemory(struct rt_rtmp_adapter *pAd)
if (pAd->TxBufSpace[num].AllocVa == NULL) {
ErrorValue = ERRLOG_OUT_OF_SHARED_MEMORY;
- DBGPRINT_ERR(("Failed to allocate a big
buffer\n"));
+ DBGPRINT_ERR("Failed to allocate a big
buffer\n");
Status = NDIS_STATUS_RESOURCES;
break;
}
@@ -197,7 +197,7 @@ int RTMPAllocTxRxRingMemory(struct rt_rtmp_adapter *pAd)
if (pAd->MgmtDescRing.AllocVa == NULL) {
ErrorValue = ERRLOG_OUT_OF_SHARED_MEMORY;
- DBGPRINT_ERR(("Failed to allocate a big buffer\n"));
+ DBGPRINT_ERR("Failed to allocate a big buffer\n");
Status = NDIS_STATUS_RESOURCES;
break;
}
@@ -251,7 +251,7 @@ int RTMPAllocTxRxRingMemory(struct rt_rtmp_adapter *pAd)
if (pAd->RxDescRing.AllocVa == NULL) {
ErrorValue = ERRLOG_OUT_OF_SHARED_MEMORY;
- DBGPRINT_ERR(("Failed to allocate a big buffer\n"));
+ DBGPRINT_ERR("Failed to allocate a big buffer\n");
Status = NDIS_STATUS_RESOURCES;
break;
}
@@ -304,7 +304,7 @@ int RTMPAllocTxRxRingMemory(struct rt_rtmp_adapter *pAd)
/* Error handling */
if (pDmaBuf->AllocVa == NULL) {
ErrorValue = ERRLOG_OUT_OF_SHARED_MEMORY;
- DBGPRINT_ERR(("Failed to allocate RxRing's 1st
buffer\n"));
+ DBGPRINT_ERR("Failed to allocate RxRing's 1st
buffer\n");
Status = NDIS_STATUS_RESOURCES;
break;
}
diff --git a/drivers/staging/rt2860/common/cmm_mac_usb.c
b/drivers/staging/rt2860/common/cmm_mac_usb.c
index 72731cb..64a65a4 100644
--- a/drivers/staging/rt2860/common/cmm_mac_usb.c
+++ b/drivers/staging/rt2860/common/cmm_mac_usb.c
@@ -236,7 +236,7 @@ int NICInitTransmit(struct rt_rtmp_adapter *pAd)
os_alloc_mem(pAd, (u8 **) (&pAd->MgmtDescRing.AllocVa),
pAd->MgmtDescRing.AllocSize);
if (pAd->MgmtDescRing.AllocVa == NULL) {
- DBGPRINT_ERR(("Failed to allocate a big buffer for
MgmtDescRing!\n"));
+ DBGPRINT_ERR("Failed to allocate a big buffer for
MgmtDescRing!\n");
Status = NDIS_STATUS_RESOURCES;
goto out1;
}
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c
b/drivers/staging/rt2860/common/cmm_wpa.c
index e37b64b..0040f45 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -2794,7 +2794,7 @@ u8 *GetSuiteFromRSNIE(u8 *rsnie,
/* Check length */
if ((len <= 0) || (pEid->Len != len)) {
- DBGPRINT_ERR(("%s : The length is invalid\n", __func__));
+ DBGPRINT_ERR("%s : The length is invalid\n", __func__);
return NULL;
}
/* Check WPA or WPA2 */
@@ -2803,14 +2803,13 @@ u8 *GetSuiteFromRSNIE(u8 *rsnie,
u16 ucount;
if (len < sizeof(struct rt_rsnie)) {
- DBGPRINT_ERR(("%s : The length is too short for WPA\n",
- __func__));
+ DBGPRINT_ERR("%s : The length is too short for WPA\n",
__func__);
return NULL;
}
/* Get the count of pairwise cipher */
ucount = cpu2le16(pRsnie->ucount);
if (ucount > 2) {
- DBGPRINT_ERR(("%s : The count(%d) of pairwise cipher is
invlaid\n", __func__, ucount));
+ DBGPRINT_ERR("%s : The count(%d) of pairwise cipher is
invlaid\n", __func__, ucount);
return NULL;
}
/* Get the group cipher */
@@ -2836,14 +2835,13 @@ u8 *GetSuiteFromRSNIE(u8 *rsnie,
isWPA2 = TRUE;
if (len < sizeof(struct rt_rsnie2)) {
- DBGPRINT_ERR(("%s : The length is too short for WPA2\n",
- __func__));
+ DBGPRINT_ERR("%s : The length is too short for WPA2\n",
__func__);
return NULL;
}
/* Get the count of pairwise cipher */
ucount = cpu2le16(pRsnie->ucount);
if (ucount > 2) {
- DBGPRINT_ERR(("%s : The count(%d) of pairwise cipher is
invlaid\n", __func__, ucount));
+ DBGPRINT_ERR("%s : The count(%d) of pairwise cipher is
invlaid\n", __func__, ucount);
return NULL;
}
/* Get the group cipher */
@@ -2863,7 +2861,7 @@ u8 *GetSuiteFromRSNIE(u8 *rsnie,
offset = sizeof(struct rt_rsnie2) + (4 * (ucount - 1));
} else {
- DBGPRINT_ERR(("%s : Unknown IE (%d)\n", __func__, pEid->Eid));
+ DBGPRINT_ERR("%s : Unknown IE (%d)\n", __func__, pEid->Eid);
return NULL;
}
@@ -2872,8 +2870,7 @@ u8 *GetSuiteFromRSNIE(u8 *rsnie,
len -= offset;
if (len < sizeof(struct rt_rsnie_auth)) {
- DBGPRINT_ERR(("%s : The length of RSNIE is too short\n",
- __func__));
+ DBGPRINT_ERR("%s : The length of RSNIE is too short\n",
__func__);
return NULL;
}
/* pointer to AKM count */
@@ -2882,8 +2879,7 @@ u8 *GetSuiteFromRSNIE(u8 *rsnie,
/* Get the count of pairwise cipher */
acount = cpu2le16(pAkm->acount);
if (acount > 2) {
- DBGPRINT_ERR(("%s : The count(%d) of AKM is invlaid\n",
- __func__, acount));
+ DBGPRINT_ERR("%s : The count(%d) of AKM is invlaid\n",
__func__, acount);
return NULL;
}
/* Get the AKM suite */
@@ -2910,7 +2906,7 @@ u8 *GetSuiteFromRSNIE(u8 *rsnie,
return pBuf;
}
} else {
- DBGPRINT_ERR(("%s : it can't get any more information beyond
AKM \n", __func__));
+ DBGPRINT_ERR("%s : it can't get any more information beyond AKM
\n", __func__);
return NULL;
}
diff --git a/drivers/staging/rt2860/common/ee_efuse.c
b/drivers/staging/rt2860/common/ee_efuse.c
index 03412f5..fed0ba4 100644
--- a/drivers/staging/rt2860/common/ee_efuse.c
+++ b/drivers/staging/rt2860/common/ee_efuse.c
@@ -264,7 +264,7 @@ int set_eFuseGetFreeBlockCount_Proc(struct rt_rtmp_adapter
*pAd, char *arg)
if (i == EFUSE_USAGE_MAP_END)
efusefreenum = 0;
}
- printk("efuseFreeNumber is %d\n", efusefreenum);
+ printk(KERN_DEBUG "efuseFreeNumber is %d\n", efusefreenum);
return TRUE;
}
@@ -274,16 +274,23 @@ int set_eFusedump_Proc(struct rt_rtmp_adapter *pAd, char
*arg)
int i = 0;
if (!pAd->bUseEfuse)
return FALSE;
+
+ printk(KERN_DEBUG "Block 0: ");
+
for (i = 0; i < EFUSE_USAGE_MAP_END / 2; i++) {
InBuf[0] = 2 * i;
InBuf[1] = 2;
InBuf[2] = 0x0;
eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
- if (i % 4 == 0)
- printk("\nBlock %x:", i / 8);
- printk("%04x ", InBuf[2]);
+ if (i && i % 4 == 0) {
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "Block %x:", i / 8);
+ }
+ printk(KERN_CONT "%04x ", InBuf[2]);
}
+ printk(KERN_CONT "\n");
+
return TRUE;
}
diff --git a/drivers/staging/rt2860/common/mlme.c
b/drivers/staging/rt2860/common/mlme.c
index 7300c6e..d9c3fd5 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -550,7 +550,7 @@ void MlmeHandler(struct rt_rtmp_adapter *pAd)
Elem->MsgLen = 0;
} else {
- DBGPRINT_ERR(("MlmeHandler: MlmeQueue empty\n"));
+ DBGPRINT_ERR("MlmeHandler: MlmeQueue empty\n");
}
}
@@ -4698,8 +4698,7 @@ BOOLEAN MlmeEnqueue(struct rt_rtmp_adapter *pAd,
/* First check the size, it MUST not exceed the mlme queue size */
if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
- DBGPRINT_ERR(("MlmeEnqueue: msg too large, size = %ld \n",
- MsgLen));
+ DBGPRINT_ERR("MlmeEnqueue: msg too large, size = %ld \n",
MsgLen);
return FALSE;
}
@@ -4762,12 +4761,12 @@ BOOLEAN MlmeEnqueueForRecv(struct rt_rtmp_adapter *pAd,
if (RTMP_TEST_FLAG
(pAd,
fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) {
- DBGPRINT_ERR(("MlmeEnqueueForRecv:
fRTMP_ADAPTER_HALT_IN_PROGRESS\n"));
+ DBGPRINT_ERR("MlmeEnqueueForRecv:
fRTMP_ADAPTER_HALT_IN_PROGRESS\n");
return FALSE;
}
/* First check the size, it MUST not exceed the mlme queue size */
if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
- DBGPRINT_ERR(("MlmeEnqueueForRecv: frame too large, size = %ld
\n", MsgLen));
+ DBGPRINT_ERR("MlmeEnqueueForRecv: frame too large, size = %ld
\n", MsgLen);
return FALSE;
}
@@ -4777,7 +4776,7 @@ BOOLEAN MlmeEnqueueForRecv(struct rt_rtmp_adapter *pAd,
{
if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType)) {
- DBGPRINT_ERR(("MlmeEnqueueForRecv: un-recongnized
mgmt->subtype=%d\n", pFrame->Hdr.FC.SubType));
+ DBGPRINT_ERR("MlmeEnqueueForRecv: un-recongnized
mgmt->subtype=%d\n", pFrame->Hdr.FC.SubType);
return FALSE;
}
}
@@ -4867,7 +4866,7 @@ void MlmeRestartStateMachine(struct rt_rtmp_adapter *pAd)
Elem->MsgLen = 0;
} else {
- DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue
empty\n"));
+ DBGPRINT_ERR("MlmeRestartStateMachine: MlmeQueue
empty\n");
}
}
#endif /* RTMP_MAC_PCI // */
diff --git a/drivers/staging/rt2860/common/rt_rf.c
b/drivers/staging/rt2860/common/rt_rf.c
index 519121d..2895447 100644
--- a/drivers/staging/rt2860/common/rt_rf.c
+++ b/drivers/staging/rt2860/common/rt_rf.c
@@ -131,8 +131,7 @@ int RT30xxReadRFRegister(struct rt_rtmp_adapter *pAd,
}
}
if (rfcsr.field.RF_CSR_KICK == BUSY) {
- DBGPRINT_ERR(("RF read R%d=0x%x fail, i[%d], k[%d]\n", regID,
- rfcsr.word, i, k));
+ DBGPRINT_ERR("RF read R%d=0x%x fail, i[%d], k[%d]\n", regID,
rfcsr.word, i, k);
return STATUS_UNSUCCESSFUL;
}
diff --git a/drivers/staging/rt2860/common/rtmp_init.c
b/drivers/staging/rt2860/common/rtmp_init.c
index 3628e85..d359a14 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -169,14 +169,14 @@ int RTMPAllocAdapterBlock(void *handle,
pBeaconBuf = kmalloc(MAX_BEACON_SIZE, MEM_ALLOC_FLAG);
if (pBeaconBuf == NULL) {
Status = NDIS_STATUS_FAILURE;
- DBGPRINT_ERR(("Failed to allocate memory -
BeaconBuf!\n"));
+ DBGPRINT_ERR("Failed to allocate memory -
BeaconBuf!\n");
break;
}
NdisZeroMemory(pBeaconBuf, MAX_BEACON_SIZE);
Status = AdapterBlockAllocateMemory(handle, (void **) & pAd);
if (Status != NDIS_STATUS_SUCCESS) {
- DBGPRINT_ERR(("Failed to allocate memory - ADAPTER\n"));
+ DBGPRINT_ERR("Failed to allocate memory - ADAPTER\n");
break;
}
pAd->BeaconBuf = pBeaconBuf;
@@ -785,8 +785,7 @@ void NICReadEEPROMParameters(struct rt_rtmp_adapter *pAd,
u8 *mac_addr)
Version.field.Version, Version.field.FaeReleaseNumber));
if (Version.field.Version > VALID_EEPROM_VERSION) {
- DBGPRINT_ERR(("E2PROM: WRONG VERSION 0x%x, should be %d\n",
- Version.field.Version, VALID_EEPROM_VERSION));
+ DBGPRINT_ERR("E2PROM: WRONG VERSION 0x%x, should be %d\n",
Version.field.Version, VALID_EEPROM_VERSION);
/*pAd->SystemErrorBitmap |= 0x00000001;
// hard-code default value when no proper E2PROM installed
@@ -2911,7 +2910,7 @@ void RTMPSetTimer(struct rt_ralink_timer *pTimer,
unsigned long Value)
RTMP_OS_Add_Timer(&pTimer->TimerObj, Value);
}
} else {
- DBGPRINT_ERR(("RTMPSetTimer failed, Timer hasn't been
initialize!\n"));
+ DBGPRINT_ERR("RTMPSetTimer failed, Timer hasn't been
initialize!\n");
}
}
@@ -2947,7 +2946,7 @@ void RTMPModTimer(struct rt_ralink_timer *pTimer,
unsigned long Value)
RTMP_OS_Mod_Timer(&pTimer->TimerObj, Value);
}
} else {
- DBGPRINT_ERR(("RTMPModTimer failed, Timer hasn't been
initialize!\n"));
+ DBGPRINT_ERR("RTMPModTimer failed, Timer hasn't been
initialize!\n");
}
}
@@ -2989,7 +2988,7 @@ void RTMPCancelTimer(struct rt_ralink_timer *pTimer, OUT
BOOLEAN * pCancelled)
RtmpTimerQRemove(pTimer->pAd, pTimer);
#endif /* RTMP_TIMER_TASK_SUPPORT // */
} else {
- DBGPRINT_ERR(("RTMPCancelTimer failed, Timer hasn't been
initialize!\n"));
+ DBGPRINT_ERR("RTMPCancelTimer failed, Timer hasn't been
initialize!\n");
}
}
@@ -3251,8 +3250,7 @@ int rt28xx_init(struct rt_rtmp_adapter *pAd,
/* Load 8051 firmware */
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS) {
- DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n",
- Status));
+ DBGPRINT_ERR("NICLoadFirmware failed, Status[=0x%08x]\n",
Status);
goto err1;
}
@@ -3268,8 +3266,7 @@ int rt28xx_init(struct rt_rtmp_adapter *pAd,
Status = RTMPAllocTxRxRingMemory(pAd);
if (Status != NDIS_STATUS_SUCCESS) {
- DBGPRINT_ERR(("RTMPAllocDMAMemory failed, Status[=0x%08x]\n",
- Status));
+ DBGPRINT_ERR("RTMPAllocDMAMemory failed, Status[=0x%08x]\n",
Status);
goto err1;
}
@@ -3284,7 +3281,7 @@ int rt28xx_init(struct rt_rtmp_adapter *pAd,
Status = MlmeInit(pAd);
if (Status != NDIS_STATUS_SUCCESS) {
- DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
+ DBGPRINT_ERR("MlmeInit failed, Status[=0x%08x]\n", Status);
goto err2;
}
/* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture
default */
@@ -3309,8 +3306,7 @@ int rt28xx_init(struct rt_rtmp_adapter *pAd,
/* */
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS) {
- DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n",
- Status));
+ DBGPRINT_ERR("NICInitializeAdapter failed, Status[=0x%08x]\n",
Status);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
}
diff --git a/drivers/staging/rt2860/common/rtmp_mcu.c
b/drivers/staging/rt2860/common/rtmp_mcu.c
index 844d4b9..80fa416 100644
--- a/drivers/staging/rt2860/common/rtmp_mcu.c
+++ b/drivers/staging/rt2860/common/rtmp_mcu.c
@@ -267,7 +267,7 @@ int RtmpAsicSendCommandToMcu(struct rt_rtmp_adapter *pAd,
} while (i++ < 100);
if (i > 100) {
- DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command
fail\n"));
+ DBGPRINT_ERR("H2M_MAILBOX still hold by MCU. command
fail\n");
return FALSE;
}
@@ -296,7 +296,7 @@ int RtmpAsicSendCommandToMcu(struct rt_rtmp_adapter *pAd,
#ifdef RTMP_MAC_PCI
#endif /* RTMP_MAC_PCI // */
{
- DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU.
command fail\n"));
+ DBGPRINT_ERR("H2M_MAILBOX still hold by MCU.
command fail\n");
}
return FALSE;
}
diff --git a/drivers/staging/rt2860/common/spectrum.c
b/drivers/staging/rt2860/common/spectrum.c
index 2d5f847..1dfb802 100644
--- a/drivers/staging/rt2860/common/spectrum.c
+++ b/drivers/staging/rt2860/common/spectrum.c
@@ -1837,7 +1837,7 @@ static void PeerChSwAnnAction(struct rt_rtmp_adapter
*pAd, struct rt_mlme_queue_
}
if (index >= pAd->ChannelListNum) {
-
DBGPRINT_ERR(("&&&&&&&&&&&&&&&&&&&&&&&&&&PeerChSwAnnAction(can not find New
Channel=%d in ChannelList[%d]\n", pAd->CommonCfg.Channel, pAd->ChannelListNum));
+
DBGPRINT_ERR("&&&&&&&&&&&&&&&&&&&&&&&&&&PeerChSwAnnAction(can not find New
Channel=%d in ChannelList[%d]\n", pAd->CommonCfg.Channel, pAd->ChannelListNum);
}
}
}
diff --git a/drivers/staging/rt2860/pci_main_dev.c
b/drivers/staging/rt2860/pci_main_dev.c
index 628559d..1949acd 100644
--- a/drivers/staging/rt2860/pci_main_dev.c
+++ b/drivers/staging/rt2860/pci_main_dev.c
@@ -202,7 +202,7 @@ static int rt2860_resume(struct pci_dev *pci_dev)
/* initialize device before it's used by a driver */
if (pci_enable_device(pci_dev)) {
- printk("pci enable fail!\n");
+ printk(KERN_ERR "rt2860: pci enable fail!\n");
return 0;
}
diff --git a/drivers/staging/rt2860/rt_linux.c
b/drivers/staging/rt2860/rt_linux.c
index abfeea1..e95db46 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -321,7 +321,7 @@ int RTMPCloneNdisPacket(struct rt_rtmp_adapter *pAd,
RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
- printk("###Clone###\n");
+ printk(KERN_DEBUG "###Clone###\n");
return NDIS_STATUS_SUCCESS;
}
@@ -343,9 +343,8 @@ int RTMPAllocateNdisPacket(struct rt_rtmp_adapter *pAd,
RTMP_PKT_TAIL_PADDING);
if (pPacket == NULL) {
*ppPacket = NULL;
-#ifdef DEBUG
- printk("RTMPAllocateNdisPacket Fail\n");
-#endif
+ pr_devel("RTMPAllocateNdisPacket Fail\n");
+
return NDIS_STATUS_FAILURE;
}
/* 2. clone the frame content */
@@ -601,15 +600,15 @@ void hex_dump(char *str, unsigned char *pSrcBufVA,
unsigned int SrcBufLen)
return;
pt = pSrcBufVA;
- printk("%s: %p, len = %d\n", str, pSrcBufVA, SrcBufLen);
+ printk(KERN_DEBUG "%s: %p, len = %d\n", str, pSrcBufVA, SrcBufLen);
for (x = 0; x < SrcBufLen; x++) {
if (x % 16 == 0)
- printk("0x%04x : ", x);
- printk("%02x ", ((unsigned char)pt[x]));
+ printk(KERN_DEBUG "0x%04x : ", x);
+ printk(KERN_DEBUG "%02x ", ((unsigned char)pt[x]));
if (x % 16 == 15)
- printk("\n");
+ printk(KERN_DEBUG "\n");
}
- printk("\n");
+ printk(KERN_DEBUG "\n");
}
/*
@@ -926,7 +925,7 @@ int RtmpOSIRQRequest(struct net_device *pNetDev)
request_irq(_pObj->pci_dev->irq, rt2860_interrupt, SA_SHIRQ,
(net_dev)->name, (net_dev));
if (retval != 0)
- printk("RT2860: request_irq ERROR(%d)\n", retval);
+ printk(KERN_ERR "rt2860: request_irq ERROR(%d)\n",
retval);
}
return retval;
@@ -1022,7 +1021,7 @@ int RtmpOSTaskKill(struct rt_rtmp_os_task *pTask)
}
#else
CHECK_PID_LEGALITY(pTask->taskPID) {
- printk("Terminate the task(%s) with pid(%d)!\n",
+ printk(KERN_INFO "Terminate the task(%s) with pid(%d)!\n",
pTask->taskName, GET_PID_NUMBER(pTask->taskPID));
mb();
pTask->task_killed = 1;
diff --git a/drivers/staging/rt2860/rt_linux.h
b/drivers/staging/rt2860/rt_linux.h
index 5acedf1..3d10e56 100644
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -422,11 +422,7 @@ do{ \
#define DBGPRINT(Level, Fmt) DBGPRINT_RAW(Level, Fmt)
-#define DBGPRINT_ERR(Fmt) \
-{ \
- printk("ERROR! "); \
- printk Fmt; \
-}
+#define DBGPRINT_ERR(fmt, args...) printk(KERN_ERR fmt, ##args)
#define DBGPRINT_S(Status, Fmt) \
{ \
diff --git a/drivers/staging/rt2860/rt_main_dev.c
b/drivers/staging/rt2860/rt_main_dev.c
index ad60cea..8f0ff94 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -420,7 +420,7 @@ int rt28xx_open(struct net_device *dev)
{
u32 reg = 0;
RTMP_IO_READ32(pAd, 0x1300, ®); /* clear garbage
interrupts */
- printk("0x1300 = %08x\n", reg);
+ printk(KERN_DEBUG "0x1300 = %08x\n", reg);
}
{
diff --git a/drivers/staging/rt2860/rt_usb.c b/drivers/staging/rt2860/rt_usb.c
index bcfc0f5..f879a75 100644
--- a/drivers/staging/rt2860/rt_usb.c
+++ b/drivers/staging/rt2860/rt_usb.c
@@ -40,25 +40,25 @@
void dump_urb(struct urb *purb)
{
- printk("urb :0x%08lx\n", (unsigned long)purb);
- printk("\tdev :0x%08lx\n", (unsigned long)purb->dev);
- printk("\t\tdev->state :0x%d\n", purb->dev->state);
- printk("\tpipe :0x%08x\n", purb->pipe);
- printk("\tstatus :%d\n", purb->status);
- printk("\ttransfer_flags :0x%08x\n", purb->transfer_flags);
- printk("\ttransfer_buffer :0x%08lx\n",
+ printk(KERN_DEBUG "urb :0x%08lx\n", (unsigned
long)purb);
+ printk(KERN_DEBUG "\tdev :0x%08lx\n", (unsigned
long)purb->dev);
+ printk(KERN_DEBUG "\t\tdev->state :0x%d\n", purb->dev->state);
+ printk(KERN_DEBUG "\tpipe :0x%08x\n", purb->pipe);
+ printk(KERN_DEBUG "\tstatus :%d\n", purb->status);
+ printk(KERN_DEBUG "\ttransfer_flags :0x%08x\n",
purb->transfer_flags);
+ printk(KERN_DEBUG "\ttransfer_buffer :0x%08lx\n",
(unsigned long)purb->transfer_buffer);
- printk("\ttransfer_buffer_length:%d\n", purb->transfer_buffer_length);
- printk("\tactual_length :%d\n", purb->actual_length);
- printk("\tsetup_packet :0x%08lx\n",
+ printk(KERN_DEBUG "\ttransfer_buffer_length:%d\n",
purb->transfer_buffer_length);
+ printk(KERN_DEBUG "\tactual_length :%d\n", purb->actual_length);
+ printk(KERN_DEBUG "\tsetup_packet :0x%08lx\n",
(unsigned long)purb->setup_packet);
- printk("\tstart_frame :%d\n", purb->start_frame);
- printk("\tnumber_of_packets :%d\n", purb->number_of_packets);
- printk("\tinterval :%d\n", purb->interval);
- printk("\terror_count :%d\n", purb->error_count);
- printk("\tcontext :0x%08lx\n",
+ printk(KERN_DEBUG "\tstart_frame :%d\n", purb->start_frame);
+ printk(KERN_DEBUG "\tnumber_of_packets :%d\n",
purb->number_of_packets);
+ printk(KERN_DEBUG "\tinterval :%d\n", purb->interval);
+ printk(KERN_DEBUG "\terror_count :%d\n", purb->error_count);
+ printk(KERN_DEBUG "\tcontext :0x%08lx\n",
(unsigned long)purb->context);
- printk("\tcomplete :0x%08lx\n\n",
+ printk(KERN_DEBUG "\tcomplete :0x%08lx\n\n",
(unsigned long)purb->complete);
}
diff --git a/drivers/staging/rt2860/sta/assoc.c
b/drivers/staging/rt2860/sta/assoc.c
index b7efb0b..e9ec6b6 100644
--- a/drivers/staging/rt2860/sta/assoc.c
+++ b/drivers/staging/rt2860/sta/assoc.c
@@ -1054,7 +1054,7 @@ void AssocPostProc(struct rt_rtmp_adapter *pAd, u8
*pAddr2, u16 CapabilityInfo,
/* Set New WPA information */
Idx = BssTableSearch(&pAd->ScanTab, pAddr2, pAd->MlmeAux.Channel);
if (Idx == BSS_NOT_FOUND) {
- DBGPRINT_ERR(("ASSOC - Can't find BSS after receiving Assoc
response\n"));
+ DBGPRINT_ERR("ASSOC - Can't find BSS after receiving Assoc
response\n");
} else {
/* Init variable */
pAd->MacTab.Content[BSSID_WCID].RSNIE_Len = 0;
diff --git a/drivers/staging/rt2860/sta/auth.c
b/drivers/staging/rt2860/sta/auth.c
index 404bd22..d00f774 100644
--- a/drivers/staging/rt2860/sta/auth.c
+++ b/drivers/staging/rt2860/sta/auth.c
@@ -508,8 +508,7 @@ BOOLEAN AUTH_ReqSend(struct rt_rtmp_adapter *pAd,
RTMPSetTimer(pAuthTimer, Timeout);
return TRUE;
} else {
- DBGPRINT_ERR(("%s - MlmeAuthReqAction() sanity check failed\n",
- pSMName));
+ DBGPRINT_ERR("%s - MlmeAuthReqAction() sanity check failed\n",
pSMName);
return FALSE;
}
diff --git a/drivers/staging/rt2860/sta/connect.c
b/drivers/staging/rt2860/sta/connect.c
index c380551..9df7eda 100644
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -214,8 +214,7 @@ void MlmeCntlMachinePerformAction(struct rt_rtmp_adapter
*pAd,
break;
#endif /* RTMP_MAC_USB // */
default:
- DBGPRINT_ERR(("ERROR! CNTL - Illegal message type(=%ld)",
- Elem->MsgType));
+ DBGPRINT_ERR("ERROR! CNTL - Illegal message type(=%ld)",
Elem->MsgType);
break;
}
}
diff --git a/drivers/staging/rt2860/sta/rtmp_data.c
b/drivers/staging/rt2860/sta/rtmp_data.c
index 23879b7..609930a 100644
--- a/drivers/staging/rt2860/sta/rtmp_data.c
+++ b/drivers/staging/rt2860/sta/rtmp_data.c
@@ -644,7 +644,7 @@ void STAHandleRxMgmtFrame(struct rt_rtmp_adapter *pAd,
struct rt_rx_blk *pRxBlk)
/* First check the size, it MUST not exceed the mlme queue size
*/
if (pRxWI->MPDUtotalByteCount > MGMT_DMA_BUFFER_SIZE) {
- DBGPRINT_ERR(("STAHandleRxMgmtFrame: frame too large,
size = %d \n", pRxWI->MPDUtotalByteCount));
+ DBGPRINT_ERR("STAHandleRxMgmtFrame: frame too large,
size = %d \n", pRxWI->MPDUtotalByteCount);
break;
}
diff --git a/drivers/staging/rt2860/sta/sync.c
b/drivers/staging/rt2860/sta/sync.c
index 747d3c6..94a64d0 100644
--- a/drivers/staging/rt2860/sta/sync.c
+++ b/drivers/staging/rt2860/sta/sync.c
@@ -283,7 +283,7 @@ void MlmeScanReqAction(struct rt_rtmp_adapter *pAd, struct
rt_mlme_queue_elem *E
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - BBP R4 to 20MHz.l\n"));
ScanNextChannel(pAd);
} else {
- DBGPRINT_ERR(("SYNC - MlmeScanReqAction() sanity check
fail\n"));
+ DBGPRINT_ERR("SYNC - MlmeScanReqAction() sanity check fail\n");
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
Status = MLME_INVALID_FORMAT;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2,
@@ -535,7 +535,7 @@ void MlmeStartReqAction(struct rt_rtmp_adapter *pAd, struct
rt_mlme_queue_elem *
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2,
&Status);
} else {
- DBGPRINT_ERR(("SYNC - MlmeStartReqAction() sanity check
fail.\n"));
+ DBGPRINT_ERR("SYNC - MlmeStartReqAction() sanity check
fail.\n");
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
Status = MLME_INVALID_FORMAT;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2,
@@ -1207,7 +1207,7 @@ void PeerBeacon(struct rt_rtmp_adapter *pAd, struct
rt_mlme_queue_elem *Elem)
}
if (index >= pAd->ChannelListNum) {
- DBGPRINT_ERR(("PeerBeacon(can not find New
Channel=%d in ChannelList[%d]\n", pAd->CommonCfg.Channel, pAd->ChannelListNum));
+ DBGPRINT_ERR("PeerBeacon(can not find New
Channel=%d in ChannelList[%d]\n", pAd->CommonCfg.Channel, pAd->ChannelListNum);
}
}
/* if the ssid matched & bssid unmatched, we should select the
bssid with large value. */
diff --git a/drivers/staging/rt2860/usb_main_dev.c
b/drivers/staging/rt2860/usb_main_dev.c
index cd15daa..1803267 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -233,7 +233,7 @@ BOOLEAN RT28XXChipsetCheck(IN void *_dev_p)
for (i = 0; i < rtusb_usb_id_len; i++) {
if (dev_p->descriptor.idVendor == rtusb_usb_id[i].idVendor &&
dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct) {
- printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
+ printk(KERN_INFO "rt2870: idVendor = 0x%x, idProduct =
0x%x\n",
dev_p->descriptor.idVendor,
dev_p->descriptor.idProduct);
break;
@@ -241,7 +241,7 @@ BOOLEAN RT28XXChipsetCheck(IN void *_dev_p)
}
if (i == rtusb_usb_id_len) {
- printk("rt2870: Error! Device Descriptor not matching!\n");
+ printk(KERN_ERR "rt2870: Error! Device Descriptor not
matching!\n");
return FALSE;
}
@@ -323,7 +323,7 @@ static BOOLEAN USBDevConfigInit(IN struct usb_device *dev,
if (!(pAd->BulkInEpAddr && pAd->BulkOutEpAddr[0])) {
printk
- ("%s: Could not find both bulk-in and bulk-out endpoints\n",
+ (KERN_ERR "%s: Could not find both bulk-in and bulk-out
endpoints\n",
__FUNCTION__);
return FALSE;
}
@@ -423,7 +423,7 @@ static int rt2870_resume(struct usb_interface *intf)
/* Init driver module */
int __init rtusb_init(void)
{
- printk("rtusb init --->\n");
+ printk(KERN_DEBUG "rtusb init --->\n");
return usb_register(&rtusb_driver);
}
@@ -431,7 +431,7 @@ int __init rtusb_init(void)
void __exit rtusb_exit(void)
{
usb_deregister(&rtusb_driver);
- printk("<--- rtusb exit\n");
+ printk(KERN_DEBUG "<--- rtusb exit\n");
}
module_init(rtusb_init);
@@ -814,7 +814,7 @@ static void rt2870_disconnect(struct usb_device *dev,
struct rt_rtmp_adapter *pA
dev->bus->bus_name, dev->devpath));
if (!pAd) {
usb_put_dev(dev);
- printk("rtusb_disconnect: pAd == NULL!\n");
+ printk(KERN_ERR "rtusb_disconnect: pAd == NULL!\n");
return;
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
--
1.7.2.3
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
