From: Jonathan Cameron <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/accel/Kconfig | 23 ++++++++++++++++++++++-
drivers/staging/iio/accel/lis3l02dq.h | 10 ++++++++++
drivers/staging/iio/accel/lis3l02dq_ring.c | 9 +++++----
3 files changed, 37 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/iio/accel/Kconfig
b/drivers/staging/iio/accel/Kconfig
index a34f1d3..81a33b6 100644
--- a/drivers/staging/iio/accel/Kconfig
+++ b/drivers/staging/iio/accel/Kconfig
@@ -66,12 +66,33 @@ config LIS3L02DQ
tristate "ST Microelectronics LIS3L02DQ Accelerometer Driver"
depends on SPI
select IIO_TRIGGER if IIO_RING_BUFFER
- select IIO_SW_RING if IIO_RING_BUFFER
+ depends on !IIO_RING_BUFFER || IIO_KFIFO_BUF || IIO_SW_RING
help
Say yes here to build SPI support for the ST microelectronics
accelerometer. The driver supplies direct access via sysfs files
and an event interface via a character device.
+choice
+ prompt "Buffer type"
+ depends on LIS3L02DQ && IIO_RING_BUFFER
+
+config LIS3L02DQ_BUF_KFIFO
+ depends on IIO_KFIFO_BUF
+ bool "Simple FIFO"
+ help
+ Kfifo based FIFO. Does not provide any events so it is up
+ to userspace to ensure it reads often enough that data is not
+ lost.
+
+config LIS3L02DQ_BUF_RING_SW
+ depends on IIO_SW_RING
+ bool "IIO Software Ring"
+ help
+ Original IIO ring buffer implementation. Provides simple
+ buffer events, half full etc.
+
+endchoice
+
config SCA3000
depends on IIO_RING_BUFFER
depends on SPI
diff --git a/drivers/staging/iio/accel/lis3l02dq.h
b/drivers/staging/iio/accel/lis3l02dq.h
index 6e73055..579b3a2 100644
--- a/drivers/staging/iio/accel/lis3l02dq.h
+++ b/drivers/staging/iio/accel/lis3l02dq.h
@@ -196,6 +196,16 @@ ssize_t lis3l02dq_read_accel_from_ring(struct device *dev,
int lis3l02dq_configure_ring(struct iio_dev *indio_dev);
void lis3l02dq_unconfigure_ring(struct iio_dev *indio_dev);
+#ifdef CONFIG_LIS3L02DQ_BUF_RING_SW
+#define lis3l02dq_free_buf iio_sw_rb_free
+#define lis3l02dq_alloc_buf iio_sw_rb_allocate
+#define lis3l02dq_register_buf_funcs iio_ring_sw_register_funcs
+#endif
+#ifdef CONFIG_LIS3L02DQ_BUF_KFIFO
+#define lis3l02dq_free_buf iio_kfifo_free
+#define lis3l02dq_alloc_buf iio_kfifo_allocate
+#define lis3l02dq_register_buf_funcs iio_kfifo_register_funcs
+#endif
#else /* CONFIG_IIO_RING_BUFFER */
static inline void lis3l02dq_remove_trigger(struct iio_dev *indio_dev)
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c
b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 1fd088a..2c461a3 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -13,6 +13,7 @@
#include "../iio.h"
#include "../sysfs.h"
#include "../ring_sw.h"
+#include "../kfifo_buf.h"
#include "accel.h"
#include "../trigger.h"
#include "lis3l02dq.h"
@@ -484,7 +485,7 @@ void lis3l02dq_remove_trigger(struct iio_dev *indio_dev)
void lis3l02dq_unconfigure_ring(struct iio_dev *indio_dev)
{
kfree(indio_dev->pollfunc);
- iio_sw_rb_free(indio_dev->ring);
+ lis3l02dq_free_buf(indio_dev->ring);
}
int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
@@ -495,13 +496,13 @@ int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
INIT_WORK(&h->work_trigger_to_ring, lis3l02dq_trigger_bh_to_ring);
h->get_ring_element = &lis3l02dq_get_ring_element;
- ring = iio_sw_rb_allocate(indio_dev);
+ ring = lis3l02dq_alloc_buf(indio_dev);
if (!ring)
return -ENOMEM;
indio_dev->ring = ring;
/* Effectively select the ring buffer implementation */
- iio_ring_sw_register_funcs(&ring->access);
+ lis3l02dq_register_buf_funcs(&ring->access);
ring->bpe = 2;
ring->scan_el_attrs = &lis3l02dq_scan_el_group;
ring->scan_timestamp = true;
@@ -522,6 +523,6 @@ int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
return 0;
error_iio_sw_rb_free:
- iio_sw_rb_free(indio_dev->ring);
+ lis3l02dq_free_buf(indio_dev->ring);
return ret;
}
--
1.7.4.1
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
