Driver contains far too many ASSERTs.
Signed-off-by: Roland Vossen <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
---
drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c | 57 +-----------------------
1 files changed, 1 insertions(+), 56 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
index 8a89723..af6db24 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
@@ -164,9 +164,6 @@ struct ampdu_info *wlc_ampdu_attach(struct wlc_info *wlc)
struct ampdu_info *ampdu;
int i;
- ASSERT(wlc->pub->tunables->ampdunummpdu <= AMPDU_MAX_MPDU);
- ASSERT(wlc->pub->tunables->ampdunummpdu > 0);
-
ampdu = kzalloc(sizeof(struct ampdu_info), GFP_ATOMIC);
if (!ampdu) {
dev_err(wlc->dev, "wl%d: wlc_ampdu_attach: out of mem\n",
@@ -239,8 +236,6 @@ void scb_ampdu_cleanup(struct ampdu_info *ampdu, struct scb
*scb)
u8 tid;
WL_AMPDU_UPDN("scb_ampdu_cleanup: enter\n");
- ASSERT(scb_ampdu);
-
for (tid = 0; tid < AMPDU_MAX_SCB_TID; tid++) {
ampdu_cleanup_tid_ini(ampdu, scb_ampdu, tid, false);
}
@@ -280,8 +275,6 @@ static void scb_ampdu_update_config(struct ampdu_info
*ampdu, struct scb *scb)
scb_ampdu->release = min(scb_ampdu->release,
ampdu->fifo_tb[TX_AC_BE_FIFO].
mcs2ampdu_table[FFPLD_MAX_MCS]);
-
- ASSERT(scb_ampdu->release);
}
void scb_ampdu_update_config_all(struct ampdu_info *ampdu)
@@ -523,10 +516,7 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct
wlc_txq_info *qi,
dev = wlc->dev;
p = *pdu;
- ASSERT(p);
-
tid = (u8) (p->priority);
- ASSERT(tid < AMPDU_MAX_SCB_TID);
f = ampdu->fifo_tb + prio2fifo[tid];
@@ -534,7 +524,6 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info
*qi,
ASSERT(scb->magic == SCB_MAGIC);
scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb);
- ASSERT(scb_ampdu);
ini = &scb_ampdu->ini[tid];
/* Let pressure continue to build ... */
@@ -587,7 +576,6 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info
*qi,
}
/* pkt is good to be aggregated */
- ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
txh = (d11txh_t *) p->data;
plcp = (u8 *) (txh + 1);
h = (struct ieee80211_hdr *)(plcp + D11_PHY_HDR_LEN);
@@ -598,7 +586,6 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info
*qi,
mcl = le16_to_cpu(txh->MacTxControlLow);
mcl &= ~TXC_AMPDU_MASK;
fbr_iscck = !(le16_to_cpu(txh->XtraFrameTypes) & 0x3);
- ASSERT(!fbr_iscck);
txh->PreloadSize = 0; /* always default to 0 */
/* Handle retry limits */
@@ -606,7 +593,6 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info
*qi,
txrate[0].count++;
rr = true;
fbr = false;
- ASSERT(!fbr);
} else {
fbr = true;
rr = false;
@@ -678,7 +664,6 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info
*qi,
is40 = (plcp0 & MIMO_PLCP_40MHZ) ? 1 : 0;
sgi = PLCP3_ISSGI(plcp3) ? 1 : 0;
mcs = plcp0 & ~MIMO_PLCP_40MHZ;
- ASSERT(mcs < MCS_TABLE_SIZE);
maxlen =
min(scb_ampdu->max_rxlen,
ampdu->max_txlen[mcs][is40][sgi]);
@@ -757,7 +742,6 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info
*qi,
p = NULL;
dev_err(dev, "%s: Bogus plen #1\n",
__func__);
- ASSERT(3 == 4);
continue;
}
@@ -769,7 +753,6 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info
*qi,
continue;
}
p = pktq_pdeq(&qi->q, prec);
- ASSERT(p);
} else {
p = NULL;
}
@@ -900,8 +883,6 @@ wlc_ampdu_dotxstatus(struct ampdu_info *ampdu, struct scb
*scb,
struct ieee80211_tx_info *tx_info;
tx_info = IEEE80211_SKB_CB(p);
- ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
- ASSERT(txs->status & TX_STATUS_AMPDU);
/* BMAC_NOTE: For the split driver, second level txstatus comes later
* So if the ACK was received then wait for the second level else just
@@ -915,20 +896,15 @@ wlc_ampdu_dotxstatus(struct ampdu_info *ampdu, struct scb
*scb,
udelay(1);
status_delay++;
if (status_delay > 10) {
- ASSERT(status_delay <= 10);
- return;
+ return; /* error condition */
}
}
- ASSERT(!(s1 & TX_STATUS_INTERMEDIATE));
- ASSERT(s1 & TX_STATUS_AMPDU);
s2 = R_REG(&wlc->regs->frmtxstatus2);
}
if (likely(scb)) {
- ASSERT(scb->magic == SCB_MAGIC);
scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb);
- ASSERT(scb_ampdu);
ini = SCB_AMPDU_INI(scb_ampdu, p->priority);
ASSERT(ini->scb == scb);
wlc_ampdu_dotxstatus_complete(ampdu, scb, p, txs, s1, s2);
@@ -941,14 +917,12 @@ wlc_ampdu_dotxstatus(struct ampdu_info *ampdu, struct scb
*scb,
tx_info = IEEE80211_SKB_CB(p);
txh = (d11txh_t *) p->data;
mcl = le16_to_cpu(txh->MacTxControlLow);
- ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
pkt_buf_free_skb(p);
/* break out if last packet of ampdu */
if (((mcl & TXC_AMPDU_MASK) >> TXC_AMPDU_SHIFT) ==
TXC_AMPDU_LAST)
break;
p = GETNEXTTXP(wlc, queue);
- ASSERT(p != NULL);
}
wlc_txfifo_complete(wlc, queue, ampdu->txpkt_weight);
}
@@ -1000,24 +974,14 @@ wlc_ampdu_dotxstatus_complete(struct ampdu_info *ampdu,
struct scb *scb,
memset(hole, 0, sizeof(hole));
#endif
- ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
- ASSERT(txs->status & TX_STATUS_AMPDU);
-
scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb);
- ASSERT(scb_ampdu);
-
tid = (u8) (p->priority);
ini = SCB_AMPDU_INI(scb_ampdu, tid);
retry_limit = ampdu->retry_limit_tid[tid];
rr_retry_limit = ampdu->rr_retry_limit_tid[tid];
-
- ASSERT(ini->scb == scb);
-
memset(bitmap, 0, sizeof(bitmap));
queue = txs->frameid & TXFID_QUEUE_MASK;
- ASSERT(queue < AC_COUNT);
-
supr_status = txs->status & TX_STATUS_SUPR_MASK;
if (txs->status & TX_STATUS_ACK_RCV) {
@@ -1099,7 +1063,6 @@ wlc_ampdu_dotxstatus_complete(struct ampdu_info *ampdu,
struct scb *scb,
/* loop through all pkts and retry if not acked */
while (p) {
tx_info = IEEE80211_SKB_CB(p);
- ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
txh = (d11txh_t *) p->data;
mcl = le16_to_cpu(txh->MacTxControlLow);
plcp = (u8 *) (txh + 1);
@@ -1179,10 +1142,6 @@ wlc_ampdu_dotxstatus_complete(struct ampdu_info *ampdu,
struct scb *scb,
break;
p = GETNEXTTXP(wlc, queue);
- if (p == NULL) {
- ASSERT(p);
- break;
- }
}
wlc_send_q(wlc, wlc->active_queue);
@@ -1208,7 +1167,6 @@ ampdu_cleanup_tid_ini(struct ampdu_info *ampdu,
scb_ampdu_t *scb_ampdu, u8 tid,
return;
scb_ampdu = SCB_AMPDU_CUBBY(ampdu, ini->scb);
- ASSERT(ini == &scb_ampdu->ini[ini->tid]);
/* free all buffered tx packets */
pktq_pflush(&scb_ampdu->txq, ini->tid, true, NULL, 0);
@@ -1221,11 +1179,6 @@ static scb_ampdu_tid_ini_t
*wlc_ampdu_init_tid_ini(struct ampdu_info *ampdu,
{
scb_ampdu_tid_ini_t *ini;
- ASSERT(scb_ampdu);
- ASSERT(scb_ampdu->scb);
- ASSERT(SCB_AMPDU(scb_ampdu->scb));
- ASSERT(tid < AMPDU_MAX_SCB_TID);
-
/* check for per-tid control of ampdu */
if (!ampdu->ini_enable[tid]) {
dev_err(ampdu->wlc->dev, "%s: Rejecting tid %d\n", __func__,
@@ -1302,12 +1255,7 @@ wlc_ampdu_null_delim_cnt(struct ampdu_info *ampdu,
struct scb *scb,
int bytes, cnt, tmp;
u8 tx_density;
- ASSERT(scb);
- ASSERT(SCB_AMPDU(scb));
-
scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb);
- ASSERT(scb_ampdu);
-
if (scb_ampdu->mpdu_density == 0)
return 0;
@@ -1318,14 +1266,11 @@ wlc_ampdu_null_delim_cnt(struct ampdu_info *ampdu,
struct scb *scb,
*/
tx_density = scb_ampdu->mpdu_density;
-
- ASSERT(tx_density <= AMPDU_MAX_MPDU_DENSITY);
tmp = 1 << (17 - tx_density);
bytes = CEIL(RSPEC2RATE(rspec), tmp);
if (bytes > phylen) {
cnt = CEIL(bytes - phylen, AMPDU_DELIMITER_LEN);
- ASSERT(cnt <= 255);
return (u8) cnt;
} else
return 0;
--
1.7.1
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
