From: Ravishankar Karkala Mallikarjunayya <[email protected]>
This is a patch to the cb_pcidas64.c file that fixes up a printk warning found by the checkpatch.pl tool Signed-off-by: Ravishankar Karkala Mallikarjunayya <[email protected]> --- drivers/staging/comedi/drivers/cb_pcidas64.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index 1e32419..a64889b 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -1739,7 +1739,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) uint32_t local_range, local_decode; int retval; - printk("comedi%d: cb_pcidas64\n", dev->minor); + printk(KERN_INFO "comedi%d: cb_pcidas64\n", dev->minor); /* * Allocate the private structure area. @@ -1776,13 +1776,13 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) } if (dev->board_ptr == NULL) { - printk - ("No supported ComputerBoards/MeasurementComputing card found\n"); + printk(KERN_WARNING + "No supported ComputerBoards/MeasurementComputing card found\n"); return -EIO; } - printk("Found %s on bus %i, slot %i\n", board(dev)->name, - pcidev->bus->number, PCI_SLOT(pcidev->devfn)); + printk(KERN_INFO "Found %s on bus %i, slot %i\n", board(dev)->name, + pcidev->bus->number, PCI_SLOT(pcidev->devfn)); if (comedi_pci_enable(pcidev, driver_cb_pcidas.driver_name)) { printk(KERN_WARNING @@ -1814,7 +1814,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!priv(dev)->plx9080_iobase || !priv(dev)->main_iobase || !priv(dev)->dio_counter_iobase) { - printk(" failed to remap io memory\n"); + printk(KERN_WARNING " failed to remap io memory\n"); return -ENOMEM; } @@ -1850,17 +1850,17 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) priv(dev)->hw_revision = hw_revision(dev, readw(priv(dev)->main_iobase + HW_STATUS_REG)); - printk(" stc hardware revision %i\n", priv(dev)->hw_revision); + printk(KERN_DEBUG " stc hardware revision %i\n", priv(dev)->hw_revision); init_plx9080(dev); init_stc_registers(dev); /* get irq */ if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED, "cb_pcidas64", dev)) { - printk(" unable to allocate irq %u\n", pcidev->irq); + printk(KERN_DEBUG " unable to allocate irq %u\n", pcidev->irq); return -EINVAL; } dev->irq = pcidev->irq; - printk(" irq %u\n", dev->irq); + printk(KERN_DEBUG " irq %u\n", dev->irq); retval = setup_subdevices(dev); if (retval < 0) @@ -1882,7 +1882,7 @@ static int detach(struct comedi_device *dev) { unsigned int i; - printk("comedi%d: cb_pcidas: remove\n", dev->minor); + printk(KERN_INFO "comedi%d: cb_pcidas: remove\n", dev->minor); if (dev->irq) free_irq(dev->irq, dev); -- 1.6.5.2 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
