As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...". The variables in the private data that are marked
volatile don't need to be. Remove the volatile.

Signed-off-by: H Hartley Sweeten <[email protected]>
Cc: Ian Abbott <[email protected]>
Cc: Frank Mori Hess <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
 drivers/staging/comedi/drivers/cb_pcidas.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c 
b/drivers/staging/comedi/drivers/cb_pcidas.c
index 95ce546..eba39b4 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -357,16 +357,16 @@ struct cb_pcidas_private {
        /*  divisors of master clock for analog input pacing */
        unsigned int divisor1;
        unsigned int divisor2;
-       volatile unsigned int count;    /*  number of analog input samples 
remaining */
-       volatile unsigned int adc_fifo_bits;    /*  bits to write to 
interrupt/adcfifo register */
-       volatile unsigned int s5933_intcsr_bits;        /*  bits to write to 
amcc s5933 interrupt control/status register */
-       volatile unsigned int ao_control_bits;  /*  bits to write to ao control 
and status register */
+       unsigned int count;     /*  number of analog input samples remaining */
+       unsigned int adc_fifo_bits;     /*  bits to write to interrupt/adcfifo 
register */
+       unsigned int s5933_intcsr_bits; /*  bits to write to amcc s5933 
interrupt control/status register */
+       unsigned int ao_control_bits;   /*  bits to write to ao control and 
status register */
        short ai_buffer[AI_BUFFER_SIZE];
        short ao_buffer[AO_BUFFER_SIZE];
        /*  divisors of master clock for analog output pacing */
        unsigned int ao_divisor1;
        unsigned int ao_divisor2;
-       volatile unsigned int ao_count; /*  number of analog output samples 
remaining */
+       unsigned int ao_count;  /*  number of analog output samples remaining */
        int ao_value[2];        /*  remember what the analog outputs are set 
to, to allow readback */
        unsigned int caldac_value[NUM_CHANNELS_8800];   /*  for readback of 
caldac */
        unsigned int trimpot_value[NUM_CHANNELS_8402];  /*  for readback of 
trimpot */
-- 
1.7.11

_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel

Reply via email to