Remove the commented out pci device entries in the MODULE_DEVICE_TABLE as well as the associated boardinfo, which is also commented out. Add some whitespace to the boardinfo to improve readability.
This driver should also support the pci-6216 card which has an additional 8 analog outputs (16 total). But the device id needs to be determined. Signed-off-by: H Hartley Sweeten <[email protected]> Cc: Ian Abbott <[email protected]> Cc: Frank Mori Hess <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> --- drivers/staging/comedi/drivers/adl_pci6208.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c index 39bdf32..fe97db2 100644 --- a/drivers/staging/comedi/drivers/adl_pci6208.c +++ b/drivers/staging/comedi/drivers/adl_pci6208.c @@ -73,21 +73,11 @@ struct pci6208_board { }; static const struct pci6208_board pci6208_boards[] = { - /*{ - .name = "pci6208v", - .dev_id = 0x6208, // not sure - .ao_chans = 8 - }, - { - .name = "pci6216v", - .dev_id = 0x6208, // not sure - .ao_chans = 16 - }, */ { - .name = "pci6208a", - .dev_id = 0x6208, - .ao_chans = 8 - } + .name = "pci6208a", + .dev_id = 0x6208, + .ao_chans = 8, + }, }; struct pci6208_private { @@ -307,11 +297,7 @@ static void __devexit adl_pci6208_pci_remove(struct pci_dev *dev) comedi_pci_auto_unconfig(dev); } -/* This is used by modprobe to translate PCI IDs to drivers. Should - * only be used for PCI and ISA-PnP devices */ static DEFINE_PCI_DEVICE_TABLE(adl_pci6208_pci_table) = { - /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ - /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) }, { 0 } }; -- 1.7.11 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
