When attaching a PCI device manually via the comedi driver `attach` hook (`pci230_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the `for_each_pci_dev` loop (in `pci230_find_pci_dev()`). It is decremented when the `detach` hook (`pci230_detach()`) is called to detach the device. However, when the PCI device is attached automatically via the `attach_pci` hook (`pci230_attach_pci()`, called at probe time via `comedi_pci_auto_config()`) it's reference count is not incremented so there will be an unmatched decrement when detaching the device.
Increment the PCI device reference count in `pci230_attach_pci()` to correct the mismatch. Once support for manual configuration has been removed from this driver, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Signed-off-by: Ian Abbott <[email protected]> --- drivers/staging/comedi/drivers/amplc_pci230.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c index 1b67d0c..66e74bd 100644 --- a/drivers/staging/comedi/drivers/amplc_pci230.c +++ b/drivers/staging/comedi/drivers/amplc_pci230.c @@ -2925,6 +2925,13 @@ static int __devinit pci230_attach_pci(struct comedi_device *dev, "amplc_pci230: BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pci230_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pci230_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pci230_attach_common(dev, pci_dev); } -- 1.7.12 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
