This value is read from the pci config space but it is never used. Just remove it.
Signed-off-by: H Hartley Sweeten <[email protected]> Cc: Ian Abbott <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> --- drivers/staging/comedi/drivers/me4000.c | 5 ----- drivers/staging/comedi/drivers/me4000.h | 1 - 2 files changed, 6 deletions(-) diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c index 5d696d6..dfee15d 100644 --- a/drivers/staging/comedi/drivers/me4000.c +++ b/drivers/staging/comedi/drivers/me4000.c @@ -338,11 +338,6 @@ static int init_board_info(struct comedi_device *dev, struct pci_dev *pci_dev_p) /* spin_lock_init(&info->preload_lock); */ /* spin_lock_init(&info->ai_ctrl_lock); */ - /* Get the serial number */ - result = pci_read_config_dword(pci_dev_p, 0x2C, &info->serial_no); - if (result != PCIBIOS_SUCCESSFUL) - return result; - /* Get the hardware revision */ result = pci_read_config_byte(pci_dev_p, 0x08, &info->hw_revision); if (result != PCIBIOS_SUCCESSFUL) diff --git a/drivers/staging/comedi/drivers/me4000.h b/drivers/staging/comedi/drivers/me4000.h index 0cb0fea..8aa05f8 100644 --- a/drivers/staging/comedi/drivers/me4000.h +++ b/drivers/staging/comedi/drivers/me4000.h @@ -252,7 +252,6 @@ struct me4000_info { unsigned long timer_regbase; /* Base address of the timer circuit */ unsigned long program_regbase; /* Base address to set the program pin for the xilinx */ - unsigned int serial_no; /* Serial number of the board */ unsigned char hw_revision; /* Hardware revision of the board */ unsigned short vendor_id; /* Meilhaus vendor id */ unsigned short device_id; /* Device id */ -- 1.7.11 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
