On Monday, September 24, 2012 7:48 AM, Ian Abbott wrote:
> This module does not export any symbols so declare all the functions as
> `static`. Some of them are currently unused but might get used in the
> future, so tag them as `__maybe_unused` for now to get rid of compiler
> warnings.
>
> Signed-off-by: Ian Abbott <abbo...@mev.co.uk>
> ---
> drivers/staging/comedi/drivers/gsc_hpdi.c | 41
> +++++++++++++++++--------------
> 1 file changed, 22 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c
> b/drivers/staging/comedi/drivers/gsc_hpdi.c
> index 5d3fa71..5fbd827 100644
> --- a/drivers/staging/comedi/drivers/gsc_hpdi.c
> +++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
> @@ -104,7 +104,7 @@ enum hpdi_registers {
> INTERRUPT_POLARITY_REG = 0x54,
> };
>
> -int command_channel_valid(unsigned int channel)
> +static int command_channel_valid(unsigned int channel)
> {
> if (channel == 0 || channel > 6) {
> printk(KERN_WARNING
Ian,
Many of these should either just be removed or converted to macros.
Then the __maybe_unused would not be needed. This one could just
be something like:
#define CMD_CHAN_VALID(x) ((((x) > 0) && ((x) <= 6)) ? 1 : 0)
> @@ -119,17 +119,18 @@ int command_channel_valid(unsigned int channel)
> enum firmware_revision_bits {
> FEATURES_REG_PRESENT_BIT = 0x8000,
> };
> -int firmware_revision(uint32_t fwr_bits)
> +
> +static int __maybe_unused firmware_revision(uint32_t fwr_bits)
> {
> return fwr_bits & 0xff;
> }
#define FIRMWARE_REV(x) ((x) & 0xff)
> -int pcb_revision(uint32_t fwr_bits)
> +static int __maybe_unused pcb_revision(uint32_t fwr_bits)
> {
> return (fwr_bits >> 8) & 0xff;
> }
#define PCB_REV(x) (((x) >> 8) & 0xff)
> -int hpdi_subid(uint32_t fwr_bits)
> +static int __maybe_unused hpdi_subid(uint32_t fwr_bits)
> {
> return (fwr_bits >> 16) & 0xff;
> }
#define HPDI_SUBID(x) (((x) >> 16) & 0xff)
> @@ -147,8 +148,9 @@ enum board_control_bits {
> CABLE_THROTTLE_ENABLE_BIT = 0x20,
> TEST_MODE_ENABLE_BIT = 0x80000000,
> };
> -uint32_t command_discrete_output_bits(unsigned int channel, int output,
> - int output_value)
> +
> +static uint32_t __maybe_unused
> +command_discrete_output_bits(unsigned int channel, int output, int
> output_value)
> {
> uint32_t bits = 0;
>
> @@ -182,24 +184,24 @@ enum board_status_bits {
> RX_OVERRUN_BIT = 0x800000,
> };
This one is a bit messy to be a macro. It's also not used so
maybe just remove it.
>
> -uint32_t almost_full_bits(unsigned int num_words)
> +static uint32_t almost_full_bits(unsigned int num_words)
> {
> -/* XXX need to add or subtract one? */
> + /* XXX need to add or subtract one? */
> return (num_words << 16) & 0xff0000;
> }
#deifne ALMOST_FULL_BITS(x) (((x) << 16) & 0xff0000)
>
> -uint32_t almost_empty_bits(unsigned int num_words)
> +static uint32_t almost_empty_bits(unsigned int num_words)
> {
> return num_words & 0xffff;
> }
#define ALMOST_EMPTY_BITS(x) ((x) & 0xffff)
> -unsigned int almost_full_num_words(uint32_t bits)
> +static unsigned int __maybe_unused almost_full_num_words(uint32_t bits)
> {
> -/* XXX need to add or subtract one? */
> + /* XXX need to add or subtract one? */
> return (bits >> 16) & 0xffff;
> }
#define ALMOST_FULL_NUM_WORDS(x) (((x) >> 16) & 0xffff)
> -unsigned int almost_empty_num_words(uint32_t bits)
> +static unsigned int __maybe_unused almost_empty_num_words(uint32_t bits)
> {
> return bits & 0xffff;
> }
#define ALMOST_EMPTY_NUM_WORDS(x) ((x) & 0xffff)
> @@ -225,39 +227,40 @@ enum interrupt_sources {
> RX_ALMOST_FULL_INTR = 14,
> RX_FULL_INTR = 15,
> };
> -int command_intr_source(unsigned int channel)
> +
> +static int __maybe_unused command_intr_source(unsigned int channel)
> {
> if (command_channel_valid(channel) == 0)
> channel = 1;
> return channel + 1;
> }
#define CMD_INTR_SOURCE(x) (CMD_CHAN_VALID(x) ? ((x) + 1) : 1)
> -uint32_t intr_bit(int interrupt_source)
> +static uint32_t intr_bit(int interrupt_source)
> {
> return 0x1 << interrupt_source;
> }
#define INTR_BIT(x) (1 << (x))
> -uint32_t tx_clock_divisor_bits(unsigned int divisor)
> +static uint32_t __maybe_unused tx_clock_divisor_bits(unsigned int divisor)
> {
> return divisor & 0xff;
> }
#define TX_CLK_DIV(x) ((x) & 0xff)
> -unsigned int fifo_size(uint32_t fifo_size_bits)
> +static unsigned int fifo_size(uint32_t fifo_size_bits)
> {
> return fifo_size_bits & 0xfffff;
> }
#define FIFO_SIZE(x) ((x) & 0x fffff)
> -unsigned int fifo_words(uint32_t fifo_words_bits)
> +static unsigned int __maybe_unused fifo_words(uint32_t fifo_words_bits)
> {
> return fifo_words_bits & 0xfffff;
> }
#define FIFO_WORDS(x) ((x) & 0xfffff)
> -uint32_t intr_edge_bit(int interrupt_source)
> +static uint32_t __maybe_unused intr_edge_bit(int interrupt_source)
> {
> return 0x1 << interrupt_source;
> }
#define INTR_EDGE_BIT(x) (1 << (x))
> -uint32_t intr_active_high_bit(int interrupt_source)
> +static uint32_t __maybe_unused intr_active_high_bit(int interrupt_source)
> {
> return 0x1 << interrupt_source;
> }
#define INTR_ACTIVE_HIGH_BIT(x) (1 << (x))
Regards,
Hartley
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
