Add constants to "comedi.h" for the extra clock and gate sources allowed by the new PCIe cards supported by the "amplc_dio200" driver.
Signed-off-by: Ian Abbott <[email protected]> --- drivers/staging/comedi/comedi.h | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h index 133f013..e0e822d 100644 --- a/drivers/staging/comedi/comedi.h +++ b/drivers/staging/comedi/comedi.h @@ -888,7 +888,12 @@ enum amplc_dio_clock_source { subdevice, preceding counter subdevice is the last counter subdevice) */ - AMPLC_DIO_CLK_EXT /* per chip external input pin */ + AMPLC_DIO_CLK_EXT, /* per chip external input pin */ + /* the following are "enhanced" clock sources for PCIe models */ + AMPLC_DIO_CLK_VCC, /* clock input HIGH */ + AMPLC_DIO_CLK_GND, /* clock input LOW */ + AMPLC_DIO_CLK_PAT_PRESENT, /* "pattern present" signal */ + AMPLC_DIO_CLK_20MHZ /* 20 MHz internal clock */ }; /* Values for setting a gate source with INSN_CONFIG_SET_GATE_SRC for @@ -907,7 +912,17 @@ enum amplc_dio_gate_source { AMPLC_DIO_GAT_RESERVED4, AMPLC_DIO_GAT_RESERVED5, AMPLC_DIO_GAT_RESERVED6, - AMPLC_DIO_GAT_RESERVED7 + AMPLC_DIO_GAT_RESERVED7, + /* the following are "enhanced" gate sources for PCIe models */ + AMPLC_DIO_GAT_NGATN = 6, /* negated per channel gate input */ + AMPLC_DIO_GAT_OUTNM2, /* non-negated output of counter + channel minus 2 */ + AMPLC_DIO_GAT_PAT_PRESENT, /* "pattern present" signal */ + AMPLC_DIO_GAT_PAT_OCCURRED, /* "pattern occurred" latched */ + AMPLC_DIO_GAT_PAT_GONE, /* "pattern gone away" latched */ + AMPLC_DIO_GAT_NPAT_PRESENT, /* negated "pattern present" */ + AMPLC_DIO_GAT_NPAT_OCCURRED, /* negated "pattern occurred" */ + AMPLC_DIO_GAT_NPAT_GONE /* negated "pattern gone away" */ }; #endif /* _COMEDI_H */ -- 1.7.12.4 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
