Only the apci3120 board supports an analog output subdevice. The boardinfo indicates this by setting the 'i_NbrAoChannel' value.
The range table as well as the function used for the insn_write operation are fixed for the analog outputs. Remove this information from the boardinfo and use it directly in the subdevice init. Signed-off-by: H Hartley Sweeten <[email protected]> Cc: Ian Abbott <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> --- drivers/staging/comedi/drivers/addi_apci_3120.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c index 9eb49ed..6ca3a3c 100644 --- a/drivers/staging/comedi/drivers/addi_apci_3120.c +++ b/drivers/staging/comedi/drivers/addi_apci_3120.c @@ -21,12 +21,10 @@ static const struct addi_board apci3120_boardtypes[] = { .i_NbrAoChannel = 8, .i_AiMaxdata = 0xffff, .i_AoMaxdata = 0x3fff, - .pr_AoRangelist = &range_apci3120_ao, .i_NbrDiChannel = 4, .i_NbrDoChannel = 4, .i_DoMaxdata = 0x0f, .interrupt = v_APCI3120_Interrupt, - .ao_write = i_APCI3120_InsnWriteAnalogOutput, }, { .pc_DriverName = "apci3001", .i_VendorId = PCI_VENDOR_ID_ADDIDATA_OLD, @@ -172,9 +170,8 @@ static int apci3120_attach_pci(struct comedi_device *dev, s->n_chan = this_board->i_NbrAoChannel; s->maxdata = this_board->i_AoMaxdata; s->len_chanlist = this_board->i_NbrAoChannel; - s->range_table = this_board->pr_AoRangelist; - s->insn_config = this_board->ao_config; - s->insn_write = this_board->ao_write; + s->range_table = &range_apci3120_ao; + s->insn_write = i_APCI3120_InsnWriteAnalogOutput; } else { s->type = COMEDI_SUBD_UNUSED; } -- 1.7.11 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
