Todd Kelsey wrote: > Hello - trying to get b2-7 working for demo of mesh between b2-7 and > b4 running 542- > > wondering what the best firmware/build combination would be. I believe > it has build 542 and q2c28 -- wasn't sure if it should have q2c26. > notes indicate 542 and firmware tested for b2-1.
My recommendation is to leave well enough alone. Different software is not likely to fix the problems you mentioned. > > It boots, seems ok but is missing a band at bottom of screen in some > apps -- a couple of times when shutting down it did do some wacky > fuzzy squealing (until I took the battery out) -- and this was not > with the app mentioned that causes squealing. The squealing is caused by a hardware problem that is fixed in later build, that cannot be worked around in software. > Then when in certain apps it seems as if it is having color/driver > issues. (attached) I believe that we have elected not to spend time working on a patch for that color issue, because it is quite difficult to fix in light of a hardware issue with the way the display controller is connected to the DCON chip on B2 systems. > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------ > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.laptop.org/listinfo/devel > _______________________________________________ Devel mailing list [email protected] http://lists.laptop.org/listinfo/devel
