Hi John, Both the antennas are using firmware version 31.07, and they work fine separately, but i cant get them to behave when both are connected to the XS. In fact if i boot the machine with two antennas connected it takes a long time to get to the point where it checks for the msh. Can it be a problem with the XS?
I was able to get both to work for a short period of time yesterday, but a network restart got me back to the same error messages, and same problem. I did not reprogram the antennas because both are actually working fine. It this problem same to antenna going to repeater mode, i check the track for this error, but didn't find something that matches this exact problem. Anyone with any knowledge on this please help. thanks, -Sulochan On Feb 15, 2008 8:25 PM, John Watlington <[EMAIL PROTECTED]> wrote: > > Those messages are certainly from the driver, but it has been tested > and works fine with multiple antenna. The most likely source of this > problem is old firmware in the second antenna. Please take a look at: > http://wiki.laptop.org/go/Active_Antenna_Reprogramming > > and ensure that the antenna is running v. 3107 of the firmware. > > A less likely possibility is actual hardware failure. You might > open the > Antenna and make sure that the USB connection is still well soldered. > > John > > On Feb 15, 2008, at 1:22 AM, sulochan acharya wrote: > > > Hi all, > > I am having trouble getting two active antennas connected to the > > server. > > > > This is what happens: > > > > 1.When i try to connect two antennas to the server and then start it: > > ERROR: > > > > klogctl: Invalid argument > > > > Starting udev: Intel_rng: FWH not detected > > > > libertas: firmware ini failed > > And the server would not boot. It would just give libertas: tx > > watchdog timeout error. > > > > I also got the following error: > > > > Warning : at /home/dwmw2/olpc-2.6/drivers/net/wireless/libertas/ > > if_usb.c:413 usb_tx_block() (Not tainted) > > [<f8a06297>] usb_tx_block+0xb0/0xfa [usb8xxx] > > ... > > ... > > ... > > ... > > Another error message: > > Libertas: EXEC_NEXT_CMD: pending data in-flight! > > Schoolserver kernel : libertas: EXEC_NEXT_CMD: pending data in-flight! > > Rootlibertas: tx watchdog timeout > > > > > > > > 2. When i start the server with one antenna it works fine. If i add > > a second one and do #service network restart > > it would get suck trying to initiate msh1 ....msh0 is active at > > this point. > > > > Also i get this warning all the time libertas: tx watchdog timeout > > > > Is this a known problem? Can someone point me towards the direction > > to getting this fixed. > > Is this a driver problem? > > > > best, > > Sulochan > > > > > > > > _______________________________________________ > > Server-devel mailing list > > [EMAIL PROTECTED] > > http://lists.laptop.org/listinfo/server-devel > >
_______________________________________________ Devel mailing list [email protected] http://lists.laptop.org/listinfo/devel
