Am 27.06.2008 um 21:55 schrieb [EMAIL PROTECTED]: > hello -- > > yesterday, as much for an exercise in using the serial port, > manipulating the kernel commandline, and doing a little > exploring, i resurrected an old tool of mine which timestamps > lines received over a serial port (or a socket), and i used it to > get a trace of XO startup and shutdown.
Nice! Thanks. So hardware-wise, USB and the touchpad seem to be time hogs, but it seems unlikely we can do anything about that. On the software-side, sshd takes close to 3 secs to start, would make sense to disable in user builds - without a password it is not useful anyway. But the one thing that really stands out as silly is that we could shave a whopping 20 secs off the shutdown by not trying to unmount the missing /security/.private ... - Bert - > there's no scientific method here, nor any great conclusions, but > since we don't usually even see the boot logs, i thought i'd pass > along the results, for general interest. > > oh -- this was done using build 708, on a unit with the dev key > installed, of course. > > paul > > =--------------------- > paul fox, [EMAIL PROTECTED] > > > > 0.000| 0.000|Forthmacs > 0.000| 1.216|Type 'i' to interrupt stand-init sequence > 0.000| 0.000|First stand-init: > 0.209| 0.208|Exceptions > 0.209| 0.000|CIF > 0.209| 0.000|DHCP init > 0.209| 0.000|memory node > 0.209| 0.000|gpio > 0.209| 0.000|Probing memory > 0.209| 0.000|MMU > 0.209| 0.000|Reclaim dictionary > 0.209| 0.000|PCI host bridge > 0.209| 0.000|ISA > 0.209| 0.000|RTC > 0.209| 0.000|CPU nodes > 0.209| 0.000|CMOS > 0.209| 0.000|Null-NVRAM > 0.209| 0.000|board revision > 0.209| 0.000|Date to EC > 0.240| 0.031|Wireless reset > 0.257| 0.016|PCI properties > 0.257| 0.000|Manufacturing data > 0.257| 0.000|USB setup > 0.561| 0.303|Suspend/resume > 0.561| 0.000|Century > 0.577| 0.015|Init SHA-1 variables > 0.577| 0.000| > 0.577| 0.000|USB2 devices: > 2.241| 1.664|/pci/[EMAIL PROTECTED],5/[EMAIL PROTECTED],0 > 2.529| 0.288|USB1 devices: > 2.529| 0.000|OLPC C2, 256 MiB memory installed, S/N CSN748056BF > 2.685| 0.156|OpenFirmware CL1 Q2D16 Q2D > 2.685| 0.000| > 2.685| 0.000|Type the Esc key to interrupt automatic startup > 2.701| 0.015|5 > 3.708| 1.006|4 3 > 5.724| 2.016|2 1 > 7.740| 2.016| Boot device: /nandflash:\boot\olpc.fth Arguments: > Boot device: /nandflash:\boot\olpc.fth Arguments: > 15.632| 7.891|Boot device: /pci/[EMAIL PROTECTED]:\boot\vmlinuz > Arguments: ro root=mtd0 rootfstype=jffs2 console=ttyS0,115200 > fbcon=font:SUN12x22Boot device: /pci/[EMAIL PROTECTED]:\boot\vmlinuz > Arguments: ro root=mtd0 rootfstype=jffs2 console=ttyS0,115200 > fbcon=font:SUN12x22 > 16.609| 0.976|Loading ramdisk image from /pci/[EMAIL PROTECTED]:\boot > \olpcrd.img ... > 21.341| 4.732|[ 0.000000] Linux version 2.6.22-20080523.1.olpc. > 28f4cb6e780db07 ([EMAIL PROTECTED]) (gcc version 4.1.2 20070925 (Red Hat > 4.1.2-27)) #1 PREEMPT Fri May 23 03:06:12 EDT 2008 > 23.481| 2.139|[ 0.000000] BIOS-provided physical RAM map: > 23.481| 0.000|[ 0.000000] BIOS-e801: 0000000000000000 - > 000000000009f000 (usable) > 23.481| 0.000|[ 0.000000] BIOS-e801: 0000000000100000 - > 000000000edfd000 (usable) > 23.481| 0.000|[ 0.000000] 237MB LOWMEM available. > 23.482| 0.000|[ 0.000000] Zone PFN ranges: > 23.482| 0.000|[ 0.000000] DMA 0 -> 4096 > 23.482| 0.000|[ 0.000000] Normal 4096 -> 60925 > 23.482| 0.000|[ 0.000000] early_node_map[1] active PFN ranges > 23.524| 0.041|[ 0.000000] 0: 0 -> 60925 > 23.524| 0.000|[ 0.000000] DMI not present or invalid. > 23.524| 0.000|[ 0.000000] Allocating PCI resources starting at > 10000000 (gap: 0edfd000:f1203000) > 23.524| 0.000|[ 0.000000] Built 1 zonelists. Total pages: 60450 > 23.524| 0.000|[ 0.000000] Kernel command line: ro root=mtd0 > rootfstype=jffs2 console=ttyS0,115200 fbcon=font:SUN12x22 > 23.525| 0.000|[ 0.000000] Initializing CPU#0 > 23.525| 0.000|[ 0.000000] CPU 0 irqstacks, hard=c0714000 > soft=c0713000 > 23.525| 0.000|[ 0.000000] PID hash table entries: 1024 (order: > 10, 4096 bytes) > 23.567| 0.041|[ 0.000000] Detected 431.221 MHz processor. > 23.567| 0.000|[ 23.150198] Console: colour EGA 80x25 > 23.567| 0.000|[ 23.150328] Dentry cache hash table entries: 32768 > (order: 5, 131072 bytes) > 23.567| 0.000|[ 23.150936] Inode-cache hash table entries: 16384 > (order: 4, 65536 bytes) > 23.567| 0.000|[ 23.188408] Memory: 228104k/243700k available > (2142k kernel code, 15040k reserved, 810k data, 168k init, 0k highmem) > 23.568| 0.000|[ 23.188473] virtual kernel memory layout: > 23.568| 0.000|[ 23.188483] fixmap : 0xffffd000 - > 0xfffff000 ( 8 kB) > 23.611| 0.042|[ 23.188496] vmalloc : 0xcf800000 - > 0xffffb000 ( 775 MB) > 23.611| 0.000|[ 23.188508] lowmem : 0xc0000000 - > 0xcedfd000 ( 237 MB) > 23.611| 0.000|[ 23.188520] .init : 0xc06e4000 - > 0xc070e000 ( 168 kB) > 23.611| 0.000|[ 23.188533] .data : 0xc06178ae - > 0xc06e21b4 ( 810 kB) > 23.611| 0.000|[ 23.188545] .text : 0xc0400000 - > 0xc06178ae (2142 kB) > 23.612| 0.000|[ 23.188575] Checking if this processor honours the > WP bit even in supervisor mode... Ok. > 23.612| 0.000|[ 23.339364] Calibrating delay using timer specific > routine.. 863.54 BogoMIPS (lpj=4317730) > 23.654| 0.041|[ 23.339627] Security Framework v1.0.0 initialized > 23.654| 0.000|[ 23.339658] Capability LSM initialized > 23.654| 0.000|[ 23.339772] Mount-cache hash table entries: 512 > 23.654| 0.000|[ 23.340331] CPU: L1 I Cache: 64K (32 bytes/line), > D cache 64K (32 bytes/line) > 23.654| 0.000|[ 23.340354] CPU: L2 Cache: 128K (32 bytes/line) > 23.655| 0.000|[ 23.340428] Compat vDSO mapped to ffffe000. > 23.655| 0.000|[ 23.340458] CPU: AMD Geode(TM) Integrated > Processor by AMD PCS stepping 02 > 23.655| 0.000|[ 23.340492] Checking 'hlt' instruction... OK. > 23.697| 0.041|[ 23.380308] NET: Registered protocol family 16 > 23.697| 0.000|[ 23.380363] geode-mfgpt: Registered timer 0 > 23.697| 0.000|[ 23.380398] mfgpt-timer: registering the MFGT > timer as a clock event. > 23.697| 0.000|[ 23.380778] geode-mfgpt: 8 timers available. > 23.697| 0.000|[ 23.380970] OLPC board with OpenFirmware: CL1 > Q2D16 Q2D > 23.697| 0.000|[ 23.392239] OLPC board revision: C2 (EC=52) > 23.698| 0.000|[ 23.393799] PCI: Using configuration type OLPC > 23.698| 0.000|[ 23.393817] Setting up standard PCI resources > 23.698| 0.000|[ 23.400281] SCSI subsystem initialized > 23.698| 0.000|[ 23.400622] usbcore: registered new interface > driver usbfs > 23.740| 0.041|[ 23.400817] usbcore: registered new interface > driver hub > 23.740| 0.000|[ 23.401037] usbcore: registered new device driver > usb > 23.740| 0.000|[ 23.401361] PCI: Probing PCI hardware > 23.740| 0.000|[ 23.407307] NET: Registered protocol family 2 > 23.740| 0.000|[ 23.411809] Time: tsc clocksource has been > installed. > 23.741| 0.000|[ 23.412079] Switched to high resolution mode on > CPU 0 > 23.741| 0.000|[ 23.485182] IP route cache hash table entries: > 2048 (order: 1, 8192 bytes) > 23.741| 0.000|[ 23.485440] TCP established hash table entries: > 8192 (order: 5, 163840 bytes) > 23.783| 0.041|[ 23.485969] TCP bind hash table entries: 8192 > (order: 5, 163840 bytes) > 23.783| 0.000|[ 23.486587] TCP: Hash tables configured > (established 8192 bind 8192) > 23.783| 0.000|[ 23.486607] TCP reno registered > 23.783| 0.000|[ 23.513083] checking if image is initramfs... it is > 23.783| 0.000|[ 23.625471] Freeing initrd memory: 9401k freed > 23.784| 0.000|[ 23.698504] input: OLPC PM as /class/input/input0 > 23.784| 0.000|[ 23.706728] input: OLPC lid switch as /class/input/ > input1 > 23.784| 0.000|[ 23.714961] input: OLPC ebook switch as /class/ > input/input2 > 23.826| 0.041|[ 23.714986] SCI is mapped to IRQ 3 > 23.826| 0.000|[ 23.715014] Set IRQ 3 for 6 > 23.826| 0.000|[ 23.715100] Set IRQ 3 for 7 > 23.826| 0.000|[ 23.768257] Total HugeTLB memory allocated, 0 > 23.826| 0.000|[ 23.768637] VFS: Disk quotas dquot_6.5.1 > 23.826| 0.000|[ 23.768702] Dquot-cache hash table entries: 1024 > (order 0, 4096 bytes) > 23.826| 0.000|[ 23.769124] JFFS2 version 2.2. (NAND) (SUMMARY) © > 2001-2006 Red Hat, Inc. > 23.827| 0.000|[ 23.868720] PROM: Built device tree with 36534 > bytes of memory. > 23.827| 0.000|[ 23.868914] io scheduler noop registered > 23.827| 0.000|[ 23.869009] io scheduler cfq registered (default) > 23.870| 0.042|[ 23.893814] lxfb 0000:00:01.1: 16384 KB of video > memory at 0xfd000000 > 23.870| 0.000|[ 23.975473] Console: switching to colour frame > buffer device 100x40 > 23.870| 0.000|[ 24.021220] fb0: Geode LX frame buffer device > 23.870| 0.000|[ 24.594524] Non-volatile memory driver v1.2 > 23.870| 0.000|[ 24.594560] AMD Geode RNG detected > 23.871| 0.000|[ 24.614659] Serial: 8250/16550 driver $Revision: > 1.90 $ 1 ports, IRQ sharing enabled > 23.871| 0.000|[ 24.639094] serial8250.0: ttyS0 at I/O 0x3f8 (irq > = 4) is a NS16550A > 23.871| 0.000|[ 25.083836] serial8250 serial8250.0: unable to > register port at index 1 (IO2f8 MEM0 IRQ3): -28 > 23.907| 0.035|[ 25.092649] serial8250 serial8250.0: unable to > register port at index 2 (IO3e8 MEM0 IRQ4): -28 > 23.907| 0.000|[ 25.101433] serial8250 serial8250.0: unable to > register port at index 3 (IO2e8 MEM0 IRQ3): -28 > 23.907| 0.000|[ 25.247865] RAMDISK driver initialized: 16 RAM > disks of 16384K size 1024 blocksize > 24.070| 0.162|[ 25.258741] Linux video capture interface: v2.00 > 24.070| 0.000|[ 25.263526] Marvell M88ALP01 'CAFE' Camera > Controller version 2 > 24.070| 0.000|[ 25.280567] PCI: Enabling device 0000:00:0c.2 > (0000 -> 0002) > 24.086| 0.015|[ 25.316059] i2c-adapter i2c-0: SMBus Quick command > not supported, can't probe for chips > 24.129| 0.043|[ 25.324298] olpc-dcon: No DCON found on SMBus > 24.129| 0.000|[ 25.372763] OmniVision ov7670 sensor driver, at > your service > 24.177| 0.047|[ 25.752466] NAND device: Manufacturer ID: 0xad, > Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) > 24.617| 0.440|[ 25.761081] 2 NAND chips detected > 24.617| 0.000|[ 25.765911] Searching for RedBoot partition table > in NAND 512MiB 3,3V 8-bit at offset 0xfd80000 > 24.617| 0.000|[ 25.781377] No RedBoot partition table detected in > NAND 512MiB 3,3V 8-bit > 24.618| 0.000|[ 25.796472] ehci_hcd 0000:00:0f.5: EHCI Host > Controller > 24.618| 0.000|[ 25.809876] ehci_hcd 0000:00:0f.5: new USB bus > registered, assigned bus number 1 > 24.618| 0.000|[ 25.847212] ehci_hcd 0000:00:0f.5: irq 10, io mem > 0xfe01b000 > 24.688| 0.069|[ 25.852893] ehci_hcd 0000:00:0f.5: USB 2.0 > started, EHCI 1.00, driver 10 Dec 2004 > 24.688| 0.000|[ 25.870107] usb usb1: configuration #1 chosen from > 1 choice > 24.688| 0.000|[ 25.883396] hub 1-0:1.0: USB hub found > 24.688| 0.000|[ 25.887196] hub 1-0:1.0: 4 ports detected > 24.689| 0.000|[ 26.014152] ohci_hcd 0000:00:0f.4: OHCI Host > Controller > 24.843| 0.154|[ 26.027577] ohci_hcd 0000:00:0f.4: new USB bus > registered, assigned bus number 2 > 24.844| 0.000|[ 26.035177] ohci_hcd 0000:00:0f.4: irq 10, io mem > 0xfe01a000 > 24.844| 0.000|[ 26.134589] usb usb2: configuration #1 chosen from > 1 choice > 24.954| 0.109|[ 26.147118] hub 2-0:1.0: USB hub found > 24.954| 0.000|[ 26.150922] hub 2-0:1.0: 4 ports detected > 24.954| 0.000|[ 26.227211] hub_port_wait_reset: portstatus=503 > portchange=10 > 25.035| 0.080|[ 26.267534] Initializing USB Mass Storage driver... > 25.066| 0.031|[ 26.287584] usb 1-1: new high speed USB device > using ehci_hcd and address 2 > 25.095| 0.029|[ 26.356937] hub_port_wait_reset: portstatus=503 > portchange=10 > 25.164| 0.069|[ 26.454186] usb 1-1: configuration #1 chosen from > 1 choice > 25.260| 0.095|[ 26.485044] usbcore: registered new interface > driver usb-storage > 25.313| 0.052|[ 26.491224] USB Mass Storage support registered. > 25.313| 0.000|[ 26.504211] usbcore: registered new interface > driver libusual > 25.313| 0.000|[ 26.568650] serio: i8042 KBD port at 0x60,0x64 irq 1 > 25.380| 0.066|[ 26.573967] serio: i8042 AUX port at 0x60,0x64 irq > 12 > 25.380| 0.000|[ 26.679928] input: AT Translated Set 2 keyboard > as /class/input/input3 > 25.487| 0.107|[ 26.723029] rtc_cmos rtc_cmos: rtc core: > registered rtc_cmos as rtc0 > 25.530| 0.042|[ 26.729564] rtc0: alarms up to one year, y3k > 25.530| 0.000|[ 27.227525] drivers/input/mouse/olpc.c: OLPC > touchpad revision 0x50. > 26.035| 0.504|[ 27.716365] drivers/input/mouse/olpc.c: OLPC > touchpad revision 0x50. > 26.523| 0.488|[ 27.844614] input: OLPC ALPS GlideSensor as /class/ > input/input4 > 26.651| 0.127|[ 27.904174] input: OLPC ALPS PenTablet as /class/ > input/input5 > 26.711| 0.060|[ 27.928915] olpc-dcon: Discovered DCON version 2 > 26.736| 0.024|[ 27.933803] Set IRQ 6 for 2 > 26.736| 0.000|[ 28.298217] sdhci: Secure Digital Host Controller > Interface driver > 27.134| 0.397|[ 28.304520] sdhci: Copyright(c) Pierre Ossman > 27.134| 0.000|[ 28.317075] sdhci: SDHCI controller found at > 0000:00:0c.1 [11ab:4101] (rev 10) > 27.134| 0.000|[ 28.324439] PCI: Enabling device 0000:00:0c.1 > (0000 -> 0002) > 27.135| 0.000|[ 28.330125] sdhci: Invalid iomem size. You may > experience problems. > 27.135| 0.000|[ 28.351054] mmc0: SDHCI at 0xfe024000 irq 11 DMA > 27.150| 0.015|[ 28.366124] geode-aes: GEODE AES engine enabled. > 27.166| 0.015|[ 28.381767] usbcore: registered new interface > driver hiddev > 27.214| 0.048|[ 28.395715] usbcore: registered new interface > driver usbhid > 27.214| 0.000|[ 28.401441] drivers/hid/usbhid/hid-core.c: > v2.6:USB HID core driver > 27.214| 0.000|[ 28.407826] Advanced Linux Sound Architecture > Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). > 27.215| 0.000|[ 28.437160] Failure reading codec reg 0x7e,Last > value=0x7e805368 > 27.250| 0.035|[ 28.443428] Failure reading codec reg 0x7e,Last > value=0x7e805368 > 27.250| 0.000|[ 28.508418] ALSA device list: > 27.298| 0.047|[ 28.511411] #0: CS5535 Audio cs5535audio at > 0x1480, irq 5 > 27.345| 0.047|[ 28.517997] TCP bic registered > 27.345| 0.000|[ 28.521069] Initializing XFRM netlink socket > 27.345| 0.000|[ 28.525533] NET: Registered protocol family 1 > 27.345| 0.000|[ 28.530148] NET: Registered protocol family 10 > 27.346| 0.000|[ 28.535024] lo: Disabled Privacy Extensions > 27.346| 0.000|[ 28.539283] Mobile IPv6 > 27.346| 0.000|[ 28.541872] NET: Registered protocol family 17 > 27.346| 0.000|[ 28.546329] Using IPI Shortcut mode > 27.346| 0.000|[ 28.550611] Freeing unused kernel memory: 168k freed > 27.346| 0.000|[ 28.555657] Write protecting the kernel read-only > data: 624k > 27.360| 0.013|Hello, (children of the) world! > 28.592| 1.232|[ 34.514604] JFFS2 notice: (611) > jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of > xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. > 33.330| 4.737| > 34.722| 1.391|INIT: version 2.86 booting > 34.770| 0.048| Welcome to Fedora > 36.306| 1.536| Press 'I' to enter interactive startup. > 36.322| 0.016|Setting clock (utc): Thu Jun 26 21:22:15 GMT 2008 > [ OK ] > 37.905| 1.583| > 38.289| 0.383|Starting udev: [ OK ] > 43.952| 5.663|Loading default keymap (us): [ OK ] > 45.361| 1.408| > 45.553| 0.191|Setting hostname localhost.localdomain: [ OK ] > 45.569| 0.016|Checking filesystems > 46.353| 0.784|Checking all file systems. > 46.370| 0.017|[ OK ] > 46.370| 0.000| > 46.882| 0.511|Mounting local filesystems: [ OK ] > 46.913| 0.030|Enabling /etc/fstab swaps: [ OK ] > 47.377| 0.464| > 47.809| 0.432|INIT: Entering runlevel: 5 > 47.857| 0.047|Entering non-interactive startup > 47.970| 0.113|Starting 0-boot-anim-start: [ OK ] > 48.321| 0.350| > 48.513| 0.191|Starting olpc-configure: olpc-configure: configuring > hardware... > 48.625| 0.112|[ OK ] > 48.625| 0.000|Starting system logger: [ OK ] > 49.634| 1.009| > 49.634| 0.000|Starting kernel logger: [ OK ] > 49.664| 0.029|Starting system message bus: Unknown username "gdm" > in message bus configuration file > 50.576| 0.912|[ OK ] > 50.576| 0.000| > 51.152| 0.575|Starting rainbow-daemon: [ OK ] > 53.936| 2.784|Starting sshd: [ OK ] > 54.464| 0.528| > 54.754| 0.289|Starting ConsoleKit: [ OK ] > 54.818| 0.064|Starting crond: [ OK ] > 55.199| 0.381|[ OK ] > 55.199| 0.000|Starting anacron: [ OK ] > 55.535| 0.335| > 55.839| 0.304|Starting Avahi daemon... [ OK ] > 55.999| 0.160|Setting network parameters... > 56.320| 0.320|Starting NetworkManager daemon: [ OK ] > 56.527| 0.207| > 56.832| 0.304|Starting NetworkManagerDispatcher daemon: [ OK ] > 56.864| 0.032|Starting HAL daemon: [ OK ] > 57.488| 0.624| > 58.016| 0.528|Starting the hardware manager: [ OK ] > 59.600| 1.584|Starting Open Hardware Manager: [ OK ] > 60.464| 0.864| > 61.023| 0.559|Starting ul-warning: [ OK ] > 61.327| 0.304|Starting z-boot-anim-stop: [ OK ] > 64.031| 2.704| > 64.975| 0.944| > 65.585| 0.610|X.Org X Server 1.4.0Release Date: 5 September 2007 > 65.586| 0.000|X Protocol Version 11, Revision 0Build Operating > System: Fedora Core 7 Red Hat, Inc. > 65.586| 0.000|Current Operating System: Linux xo-10-B4- > EC.localdomain 2.6.22-20080523.1.olpc.28f4cb6e780db07 #1 PREEMPT Fri > May 23 03:06:12 EDT 2008 i586Build Date: 27 May 2008 08:43:14PM > 65.586| 0.000|Build ID: xorg-x11-server 1.4-9.olpc2 Before > reporting problems, check http://wiki.x.org > 65.586| 0.000| to make sure that you have the latest > version.Module Loader present > 65.587| 0.000|Markers: (--) probed, (**) from config file, (==) > default setting, (++) from command line, (!!) notice, (II) > informational, > 65.623| 0.035| (WW) warning, (EE) error, (NI) not > implemented, (??) unknown.(==) Log file: "/var/log/Xorg.0.log", > Time: Thu Jun 26 21:22:42 2008 > 65.623| 0.000|(==) Using config file: "/etc/X11/xorg.conf"(EE) > Failed to load module "dbe" (module does not exist, 0) > 65.821| 0.197|(EE) Failed to load module "glx" (module does not > exist, 0)(EE) Failed to load module "dri" (module does not exist, 0) > 66.028| 0.207|(II) Module "ramdac" already built-in(EE) OLPC ALPS > PenTablet: Button: 74. > 66.554| 0.525|(EE) OLPC ALPS PenTablet: state->btn: 0x8237800.(EE) > OLPC ALPS PenTablet: Unable to parse 'null' as a map specifier string. > 66.554| 0.000|(EE) OLPC ALPS PenTablet: Unable to parse 'null' as a > map specifier string.(EE) OLPC ALPS GlideSensor: Unable to parse > 'RelAxis 0' as a map specifier. > 66.554| 0.000|(EE) OLPC ALPS GlideSensor: Unable to parse 'RelAxis > 1' as a map specifier.(EE) OLPC ALPS GlideSensor: Button: 74. > 66.555| 0.000|(EE) OLPC ALPS GlideSensor: state->btn: 0x823a260. > (EE) OLPC ALPS GlideSensor: Unable to parse 'null' as a map > specifier string. > 66.580| 0.024|(EE) OLPC ALPS GlideSensor: Unable to parse 'null' as > a map specifier string.Xlib: extension "XFree86-Misc" missing on > display ":0.0". > 69.941| 3.361|The XKEYBOARD keymap compiler (xkbcomp) reports:> > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 > symbols > 69.941| 0.000|> Ignoring extra symbolsErrors from > xkbcomp are not fatal to the X server > 105.282| 35.340| > > [ hit return to enable shell on ttyS0 -pgf ] > > 105.314| 0.032|bash-3.2# > 105.474| 0.160|bash-3.2# > 121.361| 15.886|bash-3.2# > > [ shutdown commenced from suger, with timestamps reset -pgf ] > > 121.376| 0.015|bash-3.2# INIT: Switching to run > 0.000| 12.012|INIT: Sending processes the TERM signal > 0.000| 0.000| > 0.000| 0.000| > 0.000| 0.000|waiting for X server to shut down > 0.992| 0.991| > 0.992| 0.000|xinit: unexpected signal 15. > 1.008| 0.016|Stopping ul-warning: Traceback (most recent call > last): > 2.053| 1.045| File "/etc/rc0.d/K01ul-warning", line 94, in <module> > 2.053| 0.000| fb = initial_setup() > 2.053| 0.000| File "/etc/rc0.d/K01ul-warning", line 35, in > initial_setup > 2.053| 0.000| chvt(2) > 2.053| 0.000| File "pyvt.pyx", line 42, in pyvt.chvt > 2.053| 0.000|IOError: [Errno 22] Invalid argument > 2.054| 0.000|[FAILED] > 2.325| 0.271| > 2.469| 0.144|Stopping NetworkManager daemon: [ OK ] > 3.653| 1.184|Stopping NetworkManagerDispatcher daemon: [ OK ] > 3.813| 0.159| > 3.941| 0.128|Shutting down Avahi daemon: [ OK ] > 3.973| 0.032|Stopping HAL daemon: [ OK ] > 4.117| 0.143| > 4.261| 0.144|Stopping Open Hardware Manager: [ OK ] > 4.309| 0.048|Stopping the hardware manager: [ OK ] > 4.581| 0.272| > 4.757| 0.176|Stopping ConsoleKit: [ OK ] > 4.757| 0.000|Stopping sshd: [ OK ] > 5.077| 0.319| > 5.221| 0.144|Stopping rainbow-daemon: [ OK ] > 5.285| 0.063|Stopping crond: [ OK ] > 5.509| 0.224| > 5.621| 0.111|Stopping system message bus: [ OK ] > 5.621| 0.000|Shutting down kernel logger: [ OK ] > 6.869| 1.248| > 6.869| 0.000|Shutting down system logger: [ OK ] > 6.997| 0.127|Starting killall: Traceback (most recent call last): > 7.404| 0.407| File "/etc/init.d/ul-warning", line 94, in <module> > 7.404| 0.000| fb = initial_setup() > 7.404| 0.000| File "/etc/init.d/ul-warning", line 35, in > initial_setup > 7.405| 0.000| chvt(2) > 7.405| 0.000| File "pyvt.pyx", line 42, in pyvt.chvt > 7.405| 0.000|IOError: [Errno 22] Invalid argument > 7.405| 0.000|[FAILED] > 7.596| 0.191| > 7.851| 0.255|Sending all processes the TERM signal... > 12.876| 5.024|Sending all processes the KILL signal... > 12.908| 0.031|Saving mixer settings > 13.260| 0.352|Saving random seed: > 13.276| 0.015|Syncing hardware clock to system time > 14.123| 0.847|Unmounting file systems: umount2: Invalid argument > 14.155| 0.031|umount: /security/.private: not mounted > 14.155| 0.000| > 16.203| 2.048|Cannot stat /security/.private: No such file or > directory > 16.229| 0.026|Cannot stat /security/.private: No such file or > directory > 16.229| 0.000|Cannot stat /security/.private: No such file or > directory > 21.220| 4.991|Unmounting file systems (retry): umount2: No such > file or directory > 22.164| 0.944|umount: /security/.private: not found > 22.165| 0.000| > 24.216| 2.051|Cannot stat /security/.private: No such file or > directory > 24.216| 0.000|Cannot stat /security/.private: No such file or > directory > 24.216| 0.000|Cannot stat /security/.private: No such file or > directory > 29.207| 4.991|Unmounting file systems (retry): umount2: No such > file or directory > 29.233| 0.026|umount: /security/.private: not found > 29.233| 0.000| > 31.282| 2.048|Cannot stat /security/.private: No such file or > directory > 31.282| 0.000|Cannot stat /security/.private: No such file or > directory > 31.283| 0.000|Cannot stat /security/.private: No such file or > directory > 36.349| 5.066|umount2: No such file or directory > 36.349| 0.000|umount: /security/.private: not found > 36.413| 0.063|mount: / not mounted already, or bad option > 36.429| 0.016|Halting system... > 39.437| 3.008|[ 173.985843] Power down. > 39.437| 0.000|[ 173.988307] OLPC power off sequence... _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel