(Somewhat in continuation with the x11vnc and vncviewer discussion thread started here http://lists.laptop.org/pipermail/devel/2008-November/021281.html )
Has anybody tried/gotten multivnc to work ? I started the multivnc server on my Ubuntu box, and then I start multivnc on the client side (on an XO) and it recognizes a multivnc server running in the network and attempts to connect to it, but it exits with the following information displayed. Log attached below. Any help/pointers towards getting this running on XOs, and/or otherwise on a set of 2 desktops, as a first step towards getting this to run on the XOs - would be helpful. The instruction manual available online is in Chinese and I cant seem to find an English version. I will also be pinging to the RealVNC lists too. Thanks in advance, Arjun [EMAIL PROTECTED]:~$ multivnc_client -d 0 clientID(ok click): arjs vncdisplay=0 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 > 0 recv-adv 40 type=8 length=40 serverID=teacher serverip=10.0.0.5 serverport=50000 clientadv.client_ID: arjs type=10, flag=1 switch : rfbAllowAdv vncdisplay=0 vncconfig -display :0 -connect 10.0.0.5:50000 > /dev/null 2>&1; echo -n $? vncconnect -display :0 10.0.0.5:50000 > /dev/null 2>&1; echo -n $? vnc4config -display :0 -connect 10.0.0.5:50000 > /dev/null 2>&1; echo -n $? print_popen : 127 print_popen : 127 print_popen : 127 print_popen : 127 print_popen : 127 print_popen : 127 print_popen : 127 print_popen : 127 print_popen : 127 3 [EMAIL PROTECTED]:~$ _______________________________________________ Devel mailing list [email protected] http://lists.laptop.org/listinfo/devel
