Right now this device works primarily with the XO-1, taking advantage of the AC/DC conversion going on in the XO's audio-in port. But if the gain were tweaked a bit more it could work with other audio cards.
The fact that it is XO-1 Hardware specific means that packaging for different architectures isn't a problem in the short run, correct? On Wed, Apr 8, 2009 at 7:56 AM, Peter Robinson <pbrobin...@gmail.com> wrote: >> Alas, the blocker with Measure (and Turtle Art with Sensors) is that >> we haven't come to consensus regarding a packaging strategy for the >> binary drivers we include for support of the sensor input; these >> differ by architecture, which wasn't a problem when we were building >> for just one architecture. Perhaps the packaging gurus can chime in. >> (See http://dev.sugarlabs.org/ticket/155). > > So the sensors are the ones that can get plugged into the audio > input/output on the XO? Is this custom to the XO or could be > conceivably be implemented/used on other audio cards? > > Peter > _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel