I forgot to mention the software build we are using and also I am not sure how to find that out. Reading /etc/fedora-release I just get:
OLPC release 11 (Leonidas) Kernel version is: Linux localhost.localdomain 2.6.30_xo1.5-20090908.1416.1.olpc.d1b0c02 #1 PREEMPT Tue Sep 8 14:24:21 EDT 2009 i686 i686 i386 GNU/Linux And partition layout is: [o...@localhost ~]$ mount /dev/mmcblk0p2 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /tmp on /tmp type tmpfs (rw) varcacheyum on /var/cache/yum type tmpfs (rw,mode=755) vartmp on /var/tmp type tmpfs (rw) none on /ofw type promfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) gvfs-fuse-daemon on /home/olpc/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=olpc) /dev/mmcblk0p1 on /media/Boot type ext2 (rw,nosuid,nodev,uhelper=devkit) On Mon, 2009-10-12 at 09:48 -0400, Raul Gutierrez Segales wrote: > On Sun, 2009-10-11 at 11:58 -1000, Mitch Bradley wrote: > > http://wiki.laptop.org/go/OLPC_Firmware_q3a12 > > > > This is a stabilization release for B2 machines, fixing numerous issues > > with the q3a11 firmware that was installed on them during manufacturing. > > It works on XO-1.5 A1, A2, B1, and B2 systems, but does not work on any > > XO-1 machines. > > > > The change list is rather long - see the release page above for details. > > > > We upgraded (an XO 1.5 B2) with the following procedure: > > flash u:\boot\q3a12.rom > > After rebooting, kernel initialization dies with: > > "olpc-dcon: Discovered DCON version 2" > > Nothing more is printed afterwards. Downgrading to q3a11 makes > everything work again. > > Any ideas? > > Raúl > > > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.laptop.org/listinfo/devel _______________________________________________ Devel mailing list [email protected] http://lists.laptop.org/listinfo/devel
