On 14.06.2010, at 03:47, James Cameron wrote: > On Sun, Jun 13, 2010 at 05:32:12PM +0200, Bert Freudenberg wrote: >> Installed on my 1.5 after updating the firmware to q3a39. >> Typing "boot" in OFW right after "fs-update" froze the machine. > > Unpredictable behaviour is known to occur if you try to "boot" after > fs-update, you should use "bye".
Ah, okay. But that shouldn't have done permanent damage, right? Should I reflash? >> Powered off (long-press on power button) and booted. Let it sit idle >> for a while in the first-time Sugar screen (name dialog) -> machine >> froze. > > It should idle suspend. It should not freeze. It does idle suspend. When the LED starts blinking and I touch the pad it wakes up fine. Just when I come back after some time of idling, it doesn't wake up anymore. The freeze happens sometimes with the screen still lit, sometimes after it turned off. >> However, after letting the machine sit idle for a while (even just >> after booting, still in the Sugar home screen), the whole machine >> froze. Power LED was still on. Had to power-cycle. Does not happen all >> the time, but twice already. Maybe it's my machine (one of the first >> C-test ones)? > > Sounds bad. Do you have a serial port attached? I ask because I > suspect a kernel panic and a serial port is a practical way to obtain > more problem data. No, I don't have one. > Might also be worth running memtest from OFW as well, just to exclude > certain other causes. Ran memtest (from 30m up as Richard suggested), passed, no errors. I also took out the battery to make sure everything is reset. Still freezes when I let it sit long enough. - Bert - _______________________________________________ Devel mailing list [email protected] http://lists.laptop.org/listinfo/devel
