> * "dmesg >dmesg.out" and attach it to the bug. Dextrose enables > libertas debug in /etc/rc.local to help diagnose this bug.
took me 10 minutes after it came good to work out dmesg so this is a bit later than the event: [ 0.000000] Linux version 2.6.31_xo1-20100701.1605.1.olpc.a8f1b26 (c...@bob.laptop.org) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) #1 PREEMPT Thu Jul 1 16:08:10 EDT 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e801: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e801: 0000000000100000 - 000000000ded5400 (usable) [ 0.000000] DMI 2.1 present. [ 0.000000] last_pfn = 0xded5 max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000ded5000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000dc00000 page 2M [ 0.000000] 000dc00000 - 000ded5000 page 4k [ 0.000000] kernel direct mapping tables up to ded5000 @ 7000-c000 [ 0.000000] RAMDISK: 0ded5400 - 0ec00000 [ 0.000000] Allocated new RAMDISK: 007ca000 - 014f4c00 [ 0.000000] Move RAMDISK from 000000000ded5400 - 000000000ebfffff to 007ca000 - 014f4bff [ 0.000000] 222MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0ded5000 [ 0.000000] low ram: 0 - 0ded5000 [ 0.000000] node 0 low ram: 00000000 - 0ded5000 [ 0.000000] node 0 bootmap 00001000 - 00002bdc [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 000ded5000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000400000 - 00007c53a0] TEXT DATA BSS ==> [0000400000 - 00007c53a0] [ 0.000000] #2 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #3 [00007c6000 - 00007c90cc] BRK ==> [00007c6000 - 00007c90cc] [ 0.000000] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #5 [00007ca000 - 00014f4c00] NEW RAMDISK ==> [00007ca000 - 00014f4c00] [ 0.000000] #6 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000ded5 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000ded5 [ 0.000000] On node 0 totalpages: 56948 [ 0.000000] free_area_init_node: node 0, pgdat c07458ac, node_mem_map c14f5000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 414 pages used for memmap [ 0.000000] Normal zone: 52535 pages, LIFO batch:15 [ 0.000000] Allocating PCI resources starting at ded5400 (gap: ded5400:f212ac00) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56502 [ 0.000000] Kernel command line: no_console_suspend selinux=0 ro root=/dev/mtdblock0 rootfstype=jffs2 console=ttyS0,115200 console=tty0 fbcon=font:SUN12x22 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 208244k/228180k available (2570k kernel code, 19360k reserved, 802k data, 220k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffe6000 - 0xfffff000 ( 100 kB) [ 0.000000] vmalloc : 0xce6d5000 - 0xfffe4000 ( 793 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcded5000 ( 222 MB) [ 0.000000] .init : 0xc074c000 - 0xc0783000 ( 220 kB) [ 0.000000] .data : 0xc068288d - 0xc074b48c ( 802 kB) [ 0.000000] .text : 0xc0400000 - 0xc068288d (2570 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:16 [ 0.000000] CPU 0 irqstacks, hard=c071a000 soft=c071b000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 430.981 MHz processor. [ 0.000321] Console: colour EGA 80x25 [ 0.000340] console [tty0] enabled [ 0.004358] console [ttyS0] enabled [ 0.010020] Calibrating delay loop (skipped), value calculated using timer frequency.. 861.96 BogoMIPS (lpj=4309810) [ 0.020179] Security Framework initialized [ 0.024421] Mount-cache hash table entries: 512 [ 0.030159] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) [ 0.037372] CPU: L2 Cache: 128K (32 bytes/line) [ 0.040031] Performance Counters: no PMU driver, software counters only. [ 0.046870] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02 [ 0.054940] Checking 'hlt' instruction... OK. [ 0.091827] NET: Registered protocol family 16 [ 0.096391] geode-mfgpt: 8 MFGPT timers available. [ 0.100015] geode-mfgpt: Registered timer 0 [ 0.104380] mfgpt-timer: Registering MFGPT timer 0 as a clock event, using IRQ 7 [ 0.110529] OLPC board with OpenFirmware CL1 Q2E44 Q2E [ 0.117090] OLPC board revision C2 (EC=55) [ 0.122414] PCI: Using configuration type OLPC [ 0.136256] bio: create slab <bio-0> at 0 [ 0.141473] SCSI subsystem initialized [ 0.146653] PCI: Probing PCI hardware [ 0.150017] PCI: Probing PCI hardware (bus 00) [ 0.150320] pci 0000:00:01.1: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.150350] pci 0000:00:01.1: reg 14 32bit mmio: [0xfe000000-0xfe003fff] [ 0.150378] pci 0000:00:01.1: reg 18 32bit mmio: [0xfe004000-0xfe007fff] [ 0.150407] pci 0000:00:01.1: reg 1c 32bit mmio: [0xfe008000-0xfe00bfff] [ 0.150435] pci 0000:00:01.1: reg 20 32bit mmio: [0xfe00c000-0xfe00ffff] [ 0.150509] pci 0000:00:01.2: reg 10 32bit mmio: [0xfe010000-0xfe013fff] [ 0.150621] pci 0000:00:0c.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff] [ 0.150760] pci 0000:00:0c.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.150835] pci 0000:00:0c.1: supports D1 [ 0.150854] pci 0000:00:0c.1: PME# supported from D0 D3hot [ 0.156416] pci 0000:00:0c.1: PME# disabled [ 0.160186] pci 0000:00:0c.2: reg 10 32bit mmio: [0xfe028000-0xfe02bfff] [ 0.160312] pci 0000:00:0f.0: reg 10 io port: [0x18b0-0x18b7] [ 0.160339] pci 0000:00:0f.0: reg 14 io port: [0x1000-0x10ff] [ 0.160365] pci 0000:00:0f.0: reg 18 io port: [0x1800-0x183f] [ 0.160391] pci 0000:00:0f.0: reg 1c io port: [0x1880-0x189f] [ 0.160418] pci 0000:00:0f.0: reg 20 io port: [0x1400-0x147f] [ 0.160444] pci 0000:00:0f.0: reg 24 io port: [0x1840-0x187f] [ 0.160500] pci 0000:00:0f.3: reg 10 io port: [0x1480-0x14ff] [ 0.160568] pci 0000:00:0f.4: reg 10 32bit mmio: [0xfe01a000-0xfe01afff] [ 0.160613] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold [ 0.166902] pci 0000:00:0f.4: PME# disabled [ 0.170099] pci 0000:00:0f.5: reg 10 32bit mmio: [0xfe01b000-0xfe01bfff] [ 0.170145] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold [ 0.176320] pci 0000:00:0f.5: PME# disabled [ 0.190272] Switched to high resolution mode on CPU 0 [ 0.192270] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.192296] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.192448] NET: Registered protocol family 2 [ 0.197028] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.204899] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.212337] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.219008] TCP: Hash tables configured (established 8192 bind 8192) [ 0.225515] TCP reno registered [ 0.228872] NET: Registered protocol family 1 [ 0.233610] Trying to unpack rootfs image as initramfs... [ 0.370304] Freeing initrd memory: 13483k freed [ 0.393211] input: OLPC PM as /devices/virtual/input/input0 [ 0.399234] input: OLPC lid switch as /devices/virtual/input/input1 [ 0.406071] input: OLPC ebook switch as /devices/virtual/input/input2 [ 0.413063] input: OLPC AC power jack as /devices/virtual/input/input3 [ 0.419671] SCI is mapped to IRQ 3 [ 0.425695] olpc-pm: SCI 0x20 received [ 0.428723] olpc-pm: SCI 0x0 received [ 0.436014] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.443450] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.558588] PROM: Built device tree with 39816 bytes of memory. [ 0.564743] msgmni has been set to 433 [ 0.570631] alg: No test for stdrng (krng) [ 0.574945] io scheduler noop registered [ 0.578996] io scheduler cfq registered (default) [ 0.583950] pci 0000:00:01.1: Boot video device [ 0.585972] lxfb 0000:00:01.1: 16384 KB of video memory at 0xfd000000 [ 0.690047] Console: switching to colour frame buffer device 100x40 [ 0.741893] fb0: Geode LX frame buffer device [ 0.761658] Non-volatile memory driver v1.3 [ 0.766588] AMD Geode RNG detected [ 0.770656] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.056692] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 1.072917] brd: module loaded [ 1.080603] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) [ 1.093945] 2 NAND chips detected [ 1.097886] Bad block table found at page 524224, version 0x01 [ 1.098115] Bad block table found at page 524160, version 0x01 [ 1.098285] nand_read_bbt: Bad block at 0x000005620000 [ 1.098302] nand_read_bbt: Bad block at 0x000005640000 [ 1.098338] nand_read_bbt: Bad block at 0x000007be0000 [ 1.098395] nand_read_bbt: Bad block at 0x00000cc00000 [ 1.098417] nand_read_bbt: Bad block at 0x00000d620000 [ 1.098434] nand_read_bbt: Bad block at 0x00000d640000 [ 1.098470] nand_read_bbt: Bad block at 0x00000fbe0000 [ 1.098488] nand_read_bbt: Bad block at 0x00000fd00000 [ 1.098563] nand_read_bbt: Bad block at 0x0000170c0000 [ 1.098631] nand_read_bbt: Bad block at 0x00001d620000 [ 1.098648] nand_read_bbt: Bad block at 0x00001d640000 [ 1.098729] nand_read_bbt: Bad block at 0x0000254e0000 [ 1.098766] nand_read_bbt: Bad block at 0x000027c20000 [ 1.098956] nand_read_bbt: Bad block at 0x00003d4e0000 [ 1.098979] nand_read_bbt: Bad block at 0x00003e100000 [ 1.099001] nand_read_bbt: Bad block at 0x00003ea80000 [ 1.099027] nand_read_bbt: Bad block at 0x00003fc20000 [ 1.099045] nand_read_bbt: Bad block at 0x00003fe80000 [ 1.103716] cmdlinepart partition parsing not available [ 1.109826] Searching for RedBoot partition table in NAND 512MiB 3,3V 8-bit at offset 0x0 [ 1.125950] No RedBoot partition table detected in NAND 512MiB 3,3V 8-bit [ 1.151373] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.159488] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.167071] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.174452] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 1.192257] olpc-dcon: Discovered DCON version 2 [ 1.211516] Linux video capture interface: v2.00 [ 1.311374] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.333257] geode-mfgpt: Registered timer 1 [ 1.368309] cpuidle: using governor ladder [ 1.386110] cpuidle: using governor menu [ 1.414320] sdhci: Secure Digital Host Controller Interface driver [ 1.435209] sdhci: Copyright(c) Pierre Ossman [ 1.454599] sdhci-pci 0000:00:0c.1: SDHCI controller found [11ab:4101] (rev 10) [ 1.477969] sdhci-pci 0000:00:0c.1: Invalid iomem size. You may experience problems. [ 1.502638] Registered led device: mmc0:: [ 1.523849] sdhci_set_ios: power off for mmc0 from c05c987b [ 1.547151] mmc0: SDHCI controller on PCI [0000:00:0c.1] using DMA [ 1.571828] sdhci_set_power: new power value = 14 [ 1.598468] Error allocating fallback algo aes [ 1.622325] alg: cipher: Failed to load transform for geode-aes: -2 [ 1.651839] sdhci_set_ios: power off for mmc0 from c05c987b [ 1.658594] sdhci_set_power: new power value = 0 [ 1.709531] Error allocating fallback algo ecb(aes) [ 1.735994] alg: skcipher: Failed to load transform for ecb-aes-geode: -2 [ 1.764623] geode-aes: GEODE AES engine enabled. [ 1.791359] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 1.820116] cs5535audio 0000:00:0f.3: setting latency timer to 64 [ 1.823858] Failure reading codec reg 0x7e,Last value=0x7e805368 [ 1.852288] Failure reading codec reg 0x7e,Last value=0x7e805368 [ 1.888117] ALSA device list: [ 1.912390] #0: CS5535 Audio cs5535audio at 0x1480, irq 5 [ 1.940039] TCP bic registered [ 1.964026] Initializing XFRM netlink socket [ 1.989145] NET: Registered protocol family 10 [ 2.014646] lo: Disabled Privacy Extensions [ 2.039265] Mobile IPv6 [ 2.061278] NET: Registered protocol family 17 [ 2.087299] Freeing unused kernel memory: 220k freed [ 2.209130] udev: starting version 141 [ 2.612868] usbcore: registered new interface driver usbfs [ 2.668412] usbcore: registered new interface driver hub [ 2.715382] usbcore: registered new device driver usb [ 2.785980] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.830315] ohci_hcd 0000:00:0f.4: setting latency timer to 64 [ 2.830340] ohci_hcd 0000:00:0f.4: OHCI Host Controller [ 2.869888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.904032] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1 [ 2.964516] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 3.025845] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xfe01a000 [ 3.124375] usb usb1: configuration #1 chosen from 1 choice [ 3.127322] hub 1-0:1.0: USB hub found [ 3.127378] hub 1-0:1.0: 4 ports detected [ 3.127696] ehci_hcd 0000:00:0f.5: setting latency timer to 64 [ 3.127715] ehci_hcd 0000:00:0f.5: EHCI Host Controller [ 3.127766] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 2 [ 3.267880] ehci_hcd 0000:00:0f.5: cache line size of 32 is not supported [ 3.267927] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xfe01b000 [ 3.281717] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00 [ 3.287725] usb usb2: configuration #1 chosen from 1 choice [ 3.291590] hub 2-0:1.0: USB hub found [ 3.291590] hub 2-0:1.0: 4 ports detected [ 3.823582] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 4.010724] usb 2-1: configuration #1 chosen from 1 choice [ 4.059176] lib80211: common routines for IEEE802.11 drivers [ 4.107012] lib80211_crypt: registered algorithm 'NULL' [ 4.173658] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 4.257385] usb 2-1: firmware: requesting usb8388.bin [ 4.357028] usb 2-2: configuration #1 chosen from 1 choice [ 4.408928] usbcore: registered new interface driver libusual [ 4.644328] Initializing USB Mass Storage driver... [ 4.697413] scsi0 : SCSI emulation for USB Mass Storage devices [ 4.753200] usb-storage: device found at 3 [ 4.753218] usb-storage: waiting for device to settle before scanning [ 4.756569] usbcore: registered new interface driver usb-storage [ 4.810247] USB Mass Storage support registered. [ 5.120311] usb8xxx: Firmware ready event received [ 5.150482] libertas: 00:17:c4:14:6c:6c, fw 5.110.22p23, cap 0x000003a3 [ 5.185505] libertas: eth0: Marvell WLAN 802.11 adapter [ 5.239334] libertas: PREP_CMD: command 0x0074 failed: 2 [ 5.267326] olpc-pm: SCI 0x20 received [ 5.269354] olpc-pm: SCI 0x0 received [ 5.352920] usb8xxx: Firmware does not seem to support PS mode [ 5.417617] libertas: PREP_CMD: command 0x0043 failed: 1 [ 5.466934] libertas: HOST_SLEEP_CFG failed 1 [ 5.509396] usbcore: registered new interface driver usb8xxx [ 9.437097] JFFS2 notice: (780) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 9.501997] dracut: Mounted root filesystem /dev/mtdblock0 [ 9.751596] scsi 0:0:0:0: Direct-Access Flash Drive SK_USB20 1.00 PQ: 0 ANSI: 2 [ 9.798137] sd 0:0:0:0: [sda] 3973120 512-byte logical blocks: (2.03 GB/1.89 GiB) [ 9.827746] sd 0:0:0:0: [sda] Write Protect is off [ 9.853913] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 9.853947] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 9.888135] usb-storage: device scan complete [ 9.898341] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 9.925556] sda: sda1 [ 10.078589] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 10.106179] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 10.360529] dracut: Switching root [ 12.195249] udev: starting version 141 [ 12.522139] cs5535_gpio: base=0x1000 mask=0xb003c66 major=253 [ 12.561262] Marvell M88ALP01 'CAFE' Camera Controller version 2 [ 12.561372] cafe1000-ccic 0000:00:0c.2: enabling device (0000 -> 0002) [ 13.028804] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.154811] psmouse serio1: ID: 67 00 50 [ 13.154832] psmouse serio1: OLPC touchpad revision 0x50 [ 13.600937] input: OLPC HGPK ALPS HGPK as /devices/platform/i8042/serio1/input/input5 [ 16.300909] mice: PS/2 mouse device common for all mice [ 16.496834] ov7670 1-0042: chip found @ 0x84 (cafe_ccic)
_______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel