Hi: The deployment preparation g-ds are not being kind to me today. I have prepared about 35 XO 1.75s to go out. However, I have another 15 that are causing me new grief.
The messages on boot are: USB devices: /usb@d420800/hub@0,0 OLPC 1C2, 800MHz, 1GiB memory, 4 GB internal storage, S/N SHC23500C88 Open Firmware Q4D34 EC Firmware 1.0.01 2013-09-06 00:54:24 UTC WARNING TS tag is not SHIP Type the Esc key to interrupt automatic startup Boot device: /wlan Arguments: Scan for OLPCFW not found <buffer@fda3f514:0; Can't open boot device i have used the same 5 USB .sticks for the 35 that worked, and the 15 that havent. I flashed the firmware from the USB and that worked and rebooted as above I did a 4key build install using 32013o2.zd and the fs2.zip and that went through the reflash process seemed to go through fine, but the reboot comes back with the above message. The icon comes up, the sound plays, then the above messages come up. After the reflash, there are two other messages under the first /usb@d420800 /hub@0 with the same start then a /scsi@4,0 and another with a /scsi@4 ,0/disk i tried a test-all, and it seemed to go very well up to a point wherein there were a ton of IO_RW_DIRECT response=CMD state; invalid function; sdio-poll-di-ready failed. Any ideas? If it were a 1.5, I'd try to swap the SDHC card, but these are 1.75's :-) Thanks KG
_______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel