Le 25/07/2010 18:39, Joel Sherrill a écrit : > On 07/25/2010 11:09 AM, Yann Sionneau wrote: >> Hi again ! >> >> The ethernet driver was totally wrong, i corrected it now it seems ok >> >> I have another problem with telnetd now : >> >> syslog: telnetd: accepted connection from 192.168.101.254 on /dev/pty0 >> unable to open stdio: I/O error >> > My guess is that you do not have enough file descriptors or > PTYs configured. CONFIGURE_MAXIMUM_LIBIO_FILE_DESCRIPTORS > (from memory) -- 3 for stdin, out, and error plus a few others for > the socket, telnet (3 per session?), and any file operations you > will do from the shell. I just copied the telnetd application from the network-demos. it has 8 ptys and and 20 file descriptors > > --joel >> syslog: telnetd: releasing connection from 192.168.101.254 on /dev/pty0 >> >> do you know how to correct this ? >> >> Sorry for flooding the list with my problems :) >> >> Le 25/07/2010 12:42, Yann Sionneau a écrit : >> >>> Thanks Joel& Till it helped a lot, telnetd starts well, the problem >>> comes from my ethernet driver now :) >>> >>> >>> Le 24/07/2010 15:54, Joel Sherrill a écrit : >>> >>> >>>> On 07/24/2010 02:08 AM, Till Straumann wrote: >>>> >>>> >>>>> Most likely a configuration issue. Did you see the line >>>>> 'registering the PTY driver FAILED'? That probably means >>>>> you hit the driver limit. >>>>> >>>>> Try >>>>> >>>>> #define CONFIGURE_MAXIMUM_DRIVERS 10 >>>>> >>>>> or some other reasonable number. >>>>> >>>>> >>>>> >>>> How about CONFIGURE_MAXIMUM_PTYS? >>>> >>>> Yann.. did you look at the network-demos/telnetd? network-demos >>>> is a separate CVS module. >>>> >>>> --joel >>>> >>>> >>>>> HTH >>>>> - Till >>>>> >>>>> On 07/23/2010 11:23 PM, Yann Sionneau wrote: >>>>> >>>>> >>>>>> ok ... just forgot the attachement ! >>>>>> >>>>>> Le 23/07/2010 23:21, Yann Sionneau a écrit : >>>>>> >>>>>> >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I am trying to use the telnetd included in RTEMS source tree to >>>>>>> start a >>>>>>> shell in order to do a nice sample application for the Ethernet >>>>>>> driver >>>>>>> of milkymist bsp. >>>>>>> >>>>>>> Is there some documentation about how to use it ? >>>>>>> >>>>>>> I tried what i thought was correct, according to what i've read >>>>>>> in the >>>>>>> telnetd source code. >>>>>>> >>>>>>> I've put the code i am using as attachment. >>>>>>> >>>>>>> I get this error running the application : >>>>>>> >>>>>>> *** MILKYMIST NETWORKING TEST by Yann Sionneau *** >>>>>>> == Initializing Network == >>>>>>> == Starting telnetd == >>>>>>> WARNING: registering the PTY driver FAILED >>>>>>> telnetd cannot initialize PTY driver >>>>>>> >>>>>>> If you have some advice i would really appreciate :) >>>>>>> >>>>>>> Cheers, >>>>>>> >>>>>>> >>> _______________________________________________ >>> http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org >>> IRC: #milkym...@freenode >>> Webchat: www.milkymist.org/irc.html >>> Wiki: www.milkymist.org/wiki >>> >>> >> >
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Webchat: www.milkymist.org/irc.html Wiki: www.milkymist.org/wiki
