Hi, > With the RC1 board bring-up already well on its way (only the DMX hasn't been > tested and the USB not fully tested but probably works), it's time to start > thinking about the next batch of RC2 boards.
All good news on them even not tested well above you mentioned. > Is there anything (realistic) you would like to change on the current design > which is not listed on the wiki page: > http://www.milkymist.org/wiki/index.php?title=RC1_errata For anything if probably change we surely now can start to discuss and move forward to RC2 schedule. So for now there's also collected test results after this RC1. http://en.qi-hardware.com/wiki/Milkymist_One_RC1_Reports#Boards_Test Also the schedule is standby here http://en.qi-hardware.com/wiki/Milkymist_One_run_2_schedule > By the way: for the RC2 batch, we are thinking of a series of 20 which could > be used to organize a big workshop at the 27C3. I think Wolfgang already discussed with you on this. This is meant at least we need let them be on your side this November! Right? So I can move on ordering critical parts directly. While we are moving to RC2 before sending gerber out to make pcb, the final qty still can be determined then. Surely I'll make a buffer said 10~20%. Thanks, Adam _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Webchat: www.milkymist.org/irc.html Wiki: www.milkymist.org/wiki
