Hi,
> Did you press the middle pushbutton to start the board? > No, :) Yeah, my procedure is not correct. Should be like as below you told me: 1. run >> flterm --port /dev/ttyUSB0 --kernel boot4.bin 2. press middle push button to make sure D2 light up. 3. when you see 'press Q to abort boot' on flterm serial console, do it 4. type 'serialboot' and after a short while the test program should start fyi the second LED means that the initial RAM test has passed and that the board is running the BIOS or application software BTW, I've still ordered two cables of FTDI TTL-232R-3V3 for safety. http://www.milkymist.org/sockits/milkymist_binkit_m1-1.0RC1.tar.bz2 this new binary kit I cannot download successfully here. Can you send me by email? Thank, Adam
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Twitter: www.twitter.com/milkymistvj Ideas? http://milkymist.uservoice.com
