Hi, A) Used this new flash image and test program binary: All PASS excepts ******** TEST SUMMARY ******** Failed tests: - VGA/DDC <<< I used very older monitor, it should haven't the same EDID header as request. - Ethernet/MDIO <<< described below - Video input/Decoder probe <<< I skipped since without mounting decoder.
When I tested ethernet port, modified my /etc/network/interfaces iface eth0 inet static address 192.168.0.14 netmask 255.255.255.0 I got msg below. My question: Is it ok about ID? *** Running tests in category: Ethernet MDIO: Unexpected PHY ID: 0045 [ FAILED ] ARP resolution: [ PASSED ] The log's url is: http://downloads.qi-hardware.com/people/adam/m1/m1rc1_test_log_1125 The test program binary: http://www.milkymist.org/test_tool/ B) Please be noticed that USB B port, it shows PASS, but actually I didn't plug any mouse or keyboard in. There's only one Logitech usb mouse M/N: M-UAS144 plugged into port A. When I still clicked left button on mouse, the test program shows PASS. This must be test program problem. If I used Genius keyboard LuxeMate i200 M/N:GK-090017 plugged instead port A, same PASS shown by test program tried to test port B. In order to make sure if USB Port A or Port B hardware connection is good during production, I can just plug-in and plug-out as shown below to verify: USB: HC: Device disconnect on port A USB: HC: Low speed device on port A USB: HC: VID: 04F2, PID: 0402 USB: HC: Found keyboard USB: HC: Device disconnect on port A Agreed? So you don't need to fix this moment if it needs more time. C) I'll keep testing and take some scopes waveforms on MIDI and others. Thanks, Adam
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Twitter: www.twitter.com/milkymistvj Ideas? http://milkymist.uservoice.com
