Le 25/01/11 05:20, Cristian Paul Peñaranda Rojas a écrit :
for TCP tests you have the "milkymist_networking" test inside the
testsuites/samples of my git repository.
Yes i'm aware of it
You can find informations about how to run those tests (at least on
Qemu) on this page :
http://www.milkymist.org/wiki/index.php?title=Run_RTEMS_sample_applications_on_the_Milkymist_One_board_and_on_Qemu
I'm not usign Qemu atm, as i got a MM1 Board i'm working all on real
hardware, is this code just tested to work on qemu??
Some of it has been tested on real hardware, I don't think it is the
case for the telnetd test.
Anyway did you test the flickernoise application ?
It has a telnet shell too, and it is proven to be working.
You can do a telnet and get a RTEMS shell.
I can find no reason why it wouldn't work on the board, so you can
test those tests on the board too and let me know what happens :)
Sorry tell again. but my test was not sucefull
I flashed the board with the generated:
milkymist_networking.fbi
I don't know this file format, when I developped this sample testsuite I
was sending it to the board through the serial line (at boot time the
bios waits for a program to be sent), and I was sending the .ralf file IIRC.
Or the .exe but after doing with some lm32-objcopy -Obinary
Anyway your method seems to be working since you get the serial output.
It booted ok as this log show:
*** MILKYMIST NETWORKING TEST by Yann Sionneau ***
== Initializing Network ==
== Add Route ==
Destination Gateway/Mask/Hw Flags Refs Use Expire
Interface
default 192.168.101.254 UGS 0 0 0
minimac0
192.168.101.0 255.255.255.0 U 0 0 1
minimac0
f92.168.101.254 UHSLt a r t i n g r t1e m s S h e l
l 0v i a t e l1n emtidn i-m-a cd0e
/a=u=l tS taacrctoiunngt tiesl nrettedm s= =w
no password
Device: /dev/pty0../dev/pty7 (8)pseudo-terminals
registered.
telnetd started with stacksize = 81920 and priority =
100
The conection is just made between my Laptop and the MM1 board.
The laptop ip is 192.168.101.2
It should be OK, the board IP address is 192.168.101.100
You can check the graphical out from wireshark here [1] or get the
captured filed from here [2].
Resuming i always got a ARP package when the board boots ! (good)
I get ICMP reply if i ping it (we're close !)
But telnet, as you can see just SYN, no ACKs... and a later on my comand
line a Connection timed out.
Hope this helps !
I will be glad found that something is wrong, but is a shame i cant
telnet to the board yet :/.
Wish you luck !
Saludos
Cristian Paul
[1] http://kristianpaul.org/~paul/tmp/milkymist_networking.png
[2] http://kristianpaul.org/~paul/tmp/milkymist_networking
_______________________________________________
http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org
IRC: #milkymist@Freenode
Twitter: www.twitter.com/milkymistvj
Ideas? http://milkymist.uservoice.com
