Hi kristian (I cann't find my 1GB memory card. maybe I lose it )
those are the cards I tested in flickernoise http://www.milkymist.org/wiki/index.php?title=File:Memory_cards.JPG works fine: 2GB, 512MB make system stop booting, when remove the card the system continue booting. 8GB, 16GB the source code I using: flickernoise.git : https://github.com/lekernel/flickernoise.git master 64ea9adfed208e8b27be1ed10592c101f4d0aef8 liboscparse.git : https://github.com/lekernel/liboscparse.git master 7ea720aa3b0f6e562cb61cbd50ab04636def37d0 m1testing.git : https://github.com/lekernel/m1testing master 77a3f43132894afb5cd999f28a659cd12f6eee54 milkymist.git : https://github.com/lekernel/milkymist.git master dcef87c16a431dd2fbd14f5c0d935c7d99216299 mtk.git : https://github.com/lekernel/mtk.git master 7a7bc76e31464f710fe20a55a814b1649ae17d12 rtems-yaffs2.git : https://github.com/lekernel/rtems-yaffs2.git master 62c1a70d8ebaa33dd2993a9356a92eabbb3fd5aa attach is the boot logs. -- Best Regards Xiangfu -- Qi RSS feed, http://en.qi-hardware.com/feed/rss20.xml --
xiangfu@macbook:~/workspace/PanGu/MilkyMist/m1s.git$ while : ; do cat /dev/ttyUSB0 ; done libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0RC3 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x441a33e0 0x443233e0 0x444a33e0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0RC3 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (4fbecaa7) BRD: SoC 1.0RC3 on Milkymist One (PCB revision 1) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0RC3 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A OK I: MAC address: 10:e2:d5:00:00:00 I: Press Q or ESC to abort boot USB: HC: Transfer start: RX timeout error USB: HC: Control transfer failed: USB: HC: SETUP reply: USB: HC: (no data) USB: HC: VID: 15D9, PID: 0A37 USB: HC: Found mouse I: Booting from filesystem... E: File not found: BOOT.BIN E: Firmware image not found I: Booting from flash... I: Decompressing 528323 bytes from flash... I: Booting... yyslog: ftpd: FTP daemon started (3D esveiscsei:o n/sd emva/xp)t 0../dev/pty4 (5)pseudo-terminals registered. telnetd started with stacksize = 81920 and priority = 9 RTEMS SHELL (Ver.1.0-FRC):/dev/console. Mar 28 2011. 'help' to list commands. [/] #
libHPDMC SDRAM initialization runtime (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3. Version 1.0RC3 Initialization sequence completed. Autocalibration OK, testing memory... All SDRAM initialization completed, boot continuing. VGA: framebuffers at 0x441a33e0 0x443233e0 0x444a33e0 VGA: DDC I2C bus initialized VGA: mode set to 640x480 MILKYMIST(tm) v1.0RC3 BIOS http://www.milkymist.org (c) Copyright 2007, 2008, 2009, 2010 Sebastien Bourdeauducq This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. I: BIOS CRC passed (4fbecaa7) BRD: SoC 1.0RC3 on Milkymist One (PCB revision 1) BRD: Mem. card : Yes BRD: AC'97 : Yes BRD: PFPU : Yes BRD: TMU : Yes BRD: Ethernet : Yes BRD: FML meter : Yes BRD: Video in : Yes BRD: MIDI : Yes BRD: DMX : Yes BRD: IR : Yes BRD: USB : Yes BRD: Memtester : No TMU: texture mapping unit initialized USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0RC3 UKB: USB keyboard connected to console I: Displaying splash screen...USB: HC: Low speed device on port A OK I: MAC address: 10:e2:d5:00:00:00 I: Press Q or ESC to abort boot USB: HC: VID: 15D9, PID: 0A37 USB: HC: Found mouse I: Booting from filesystem... ~~~ STOP here. I have to remove the memory card. then the system continue booting ~~~ E: Unable to initialize memory card driver E: Unable to initialize filesystem I: Booting from flash... I: Decompressing 528323 bytes from flash... I: Booting... memcard_disk_init: Error: SC = 27: Initialize memory card memcard_register: Error: SC = 27: Register disk memory card driver syslog: ftpd: FTP daemon started (3 Dseevsiscieo:n s/ dmeavx/)p t y0../dev/pty4 (5)pseudo-terminals registered. telnetd started with stacksize = 81920 and priority = 9 RTEMS SHELL (Ver.1.0-FRC):/dev/console. Mar 28 2011. 'help' to list commands. [/] #
memcard.16gb.log
Description: Binary data
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkymist@Freenode Twitter: www.twitter.com/milkymistvj Ideas? http://milkymist.uservoice.com
