Hi Sebastien if you think the patch is ok. please apply this patch (with Acked-by..)
On 06/10/2011 10:15 PM, Xiangfu Liu wrote: > Acked-by: Jack <[email protected]> <QQ:51666535> > --- > cores/rc5/rtl/rc5.v | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > Hi Sebastien > > this patch make my m1 works with the philips remote controller > and the remote controller that adam sent to me.(other rc-5 remote controller > :) > > the address value I got is excatly same with Adam's oscillograph > http://downloads.qi-hardware.com/people/adam/m1/pic/button1_0x1c_wide.JPG > > > diff --git a/cores/rc5/rtl/rc5.v b/cores/rc5/rtl/rc5.v > index 6f48bae..217dff7 100644 > --- a/cores/rc5/rtl/rc5.v > +++ b/cores/rc5/rtl/rc5.v > @@ -86,7 +86,7 @@ always @(posedge sys_clk) begin > if(~rx_busy) begin // look for start bit > if(rx2) begin // start bit found > rx_busy <= 1'b1; > - rx_count16 <= 4'd11; > + rx_count16 <= 4'd13; > rx_bitcount <= 4'd0; > end > end else begin -- Best Regards Xiangfu -- Qi RSS feed, http://en.qi-hardware.com/feed/rss20.xml -- _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkymist@Freenode Twitter: www.twitter.com/milkymistvj Ideas? http://milkymist.uservoice.com
