Hi Xiangfu, * This patch is good that can detect well on my remoter:
http://en.qi-hardware.com/wiki/File:Adam_remote_controller_2.jpg * results: RC5 reception: Press the remote's [1] ... [9], [0], one by one Waiting for remote. e for exit should be [0x01], get [0x01], [0x1001]. [1] passed should be [0x02], get [0x01], [0x1001]. should be [0x02], get [0x02], [0x1802]. [2] passed should be [0x03], get [0x02], [0x1802]. should be [0x03], get [0x03], [0x1003]. [3] passed should be [0x04], get [0x03], [0x1003]. should be [0x04], get [0x03], [0x1803]. should be [0x04], get [0x03], [0x1003]. should be [0x04], get [0x03], [0x1803]. should be [0x04], get [0x03], [0x1003]. should be [0x04], get [0x03], [0x1803]. should be [0x04], get [0x03], [0x1003]. should be [0x04], get [0x04], [0x1804]. [4] passed should be [0x05], get [0x04], [0x1004]. should be [0x05], get [0x04], [0x1004]. should be [0x05], get [0x04], [0x1804]. should be [0x05], get [0x04], [0x1004]. should be [0x05], get [0x05], [0x1805]. [5] passed should be [0x06], get [0x05], [0x1005]. should be [0x06], get [0x05], [0x1805]. should be [0x06], get [0x05], [0x1005]. should be [0x06], get [0x05], [0x1805]. should be [0x06], get [0x06], [0x1006]. [6] passed should be [0x07], get [0x06], [0x1806]. should be [0x07], get [0x06], [0x1006]. should be [0x07], get [0x07], [0x1807]. [7] passed should be [0x08], get [0x07], [0x1807]. should be [0x08], get [0x07], [0x1007]. should be [0x08], get [0x07], [0x1007]. should be [0x08], get [0x08], [0x1808]. [8] passed should be [0x09], get [0x08], [0x1808]. should be [0x09], get [0x08], [0x1008]. should be [0x09], get [0x08], [0x1008]. should be [0x09], get [0x09], [0x1809]. [9] passed should be [0x00], get [0x09], [0x1009]. should be [0x00], get [0x00], [0x1800]. [0] passed Now press 'e' exit Infrared test. rx [0x1000] [ PASSED ] Select a test category below, or hit ENTER to run all tests: a: SDRAM b: GPIO c: VGA d: Memory card e: Audio f: Ethernet g: Video input h: MIDI i: DMX512 j: Infrared k: USB RC5 reception: Press the remote's [1] ... [9], [0], one by one Waiting for remote. e for exit should be [0x01], get [0x01], [0x1801]. [1] passed should be [0x02], get [0x01], [0x1801]. should be [0x02], get [0x02], [0x1002]. [2] passed should be [0x03], get [0x02], [0x1002]. should be [0x03], get [0x01], [0x1801]. Now press 'e' exit Infrared test. rx [0x1801] [ FAILED ] * but for T003 cannot. : http://en.qi-hardware.com/wiki/File:T003_front.JPG * results: RC5 reception: Press the remote's [1] ... [9], [0], one by one Waiting for remote. e for exit should be [0x01], get [0x3c], [0x107c]. Now press 'e' exit Infrared test. rx [0x187c] [ FAILED ] Thanks, adam
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkymist@Freenode Twitter: www.twitter.com/milkymistvj Ideas? http://milkymist.uservoice.com
