I mentioned this on #milkymist before: after a while of playing with MIDI, rendering starts to stall briefly when there are is a burst of messages. If I force a high enough message rate for long enough, the M1 even hangs completely.
Here is the video to prove it: http://downloads.qi-hardware.com/people/werner/m1/midi/MVI_1755.MOV 00:04 rendering stops briefly if I move the KP's slider (assigned to wave_x) rapidly up and down 00:08 this also happens with the nK2's slider assigned to wave_r 00:12 also with an unassigned slider (that still sends MIDI messages, of course) 00:15 the pad is no different (except in the Y direction, but I'm probably just too slow there) 00:22 rapidly generating a lot of MIDI messsages eventually ... 00:28 ... hangs the M1 00:32 also click-to-GUI doesn't work anymore The M1 had an uptime of a day or longer with a fair amount of MIDI use then I did this experiment. This is the second time I see this behaviour, under similar circumstances. I plugged in JTAG after the hang and the serial console doesn't answer either. Firmware is plain vanilla 2011-07-13. Any suggestions ? - Werner _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkymist@Freenode
