> > Also not includes the idea about 'crowbar' either. > > I thought you wouldn't be too enthusiastic about it :-) How about > a jumper between J21.1/2 and 5 V ? Put it a few cm away so that a > board won't touch it by accident. >
No, good idea we wouldn't easily ignore it. :-) Will do this. > > By the way, I've been browsing through the schematics, looking > for style issues that can cause problems when reviewing. Here > are a few small things I found on page 10 (SDRAM): > > - R71, R90, R93-R112, and RR114-R133 have no value > > - several bypassing caps and voltage dividers (R92, etc.) have > component reference and/or value printed over a neighbouring > component > > - the labeling of U14 and U15 looks a bit cramped. Would it > be possible to put the part number into the part, where > there's a lot of nice unused yellow space ? > > I've just browed all pages to fix stuffs about your spots above, thanks a lot that you've been spent time. Also thanks Sebasiten watched out my inadvertently flipped U6. :-) so latest R4 draft: http://downloads.qi-hardware.com/hardware/milkymist_one/sch/tmp/MILKYMISTONE.pdf When after modified them, I'd recorded them with reason or link here: http://en.qi-hardware.com/wiki/Milkymist_One_Schematic_Change_History#R4_.28latest_schematic_draft.29 To those unsolved or under discussion topics, I temporarily put here: http://en.qi-hardware.com/wiki/Milkymist_One_RC3_Known_Issues#R4_draft_feedback then we'll solve each item step by step. Thanks, - adam
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkymist@Freenode
