Hi,
I got the latest code drop of 6791 today morning.
I have removed .ompi_ignore and .ompi_unignore files from
ompi/mca/mpool/mvapi directory. If I don't remove and build, the MPI
program fails with signal 11. After removing those hidden files from
that directory and building, signal 11 error disappeared.
I have configured with the options given by Galen.
./configure --prefix=/openmpi --with-btl-mvapi=/usr/local/topspin/
--enable-mca-no-build=btl-openib,pml-teg,pml-uniq
After make all install, I have run pallas but I got the same error
messages (please see down below for error messages). I have run 3-4
times, sometimes I didn't get any output but pallas just hungs. I have
run pingpong only. I have run pallas (all functions including reduce),
but got the following messages in intra-node case.
Request for 0 bytes (coll_basic_reduce_scatter.c, 79)
Request for 0 bytes (coll_basic_reduce.c, 193)
Request for 0 bytes (coll_basic_reduce_scatter.c, 79)
Request for 0 bytes (coll_basic_reduce.c, 193)
Since these types of messages seen by George, upcoming patch might
resolve this issue.
Also, I have run mpi-ping.c program given by Galen with the latest
code
drop and it just hung. Here is the output
[root@micrompi-1 ~]# mpirun -np 2 ./a.out -r 10 0 100000 1000
Could not join a running, existing universe
Establishing a new one named: default-universe-12461
mpi-ping: ping-pong
nprocs=2, reps=10, min bytes=0, max bytes=100000 inc bytes=1000
0 pings 1
... I just did ctrl+c here after 10 mins ...
2 processes killed (possibly by Open MPI)
I have no clue whether the George patch will fix this problem or not.
Before running mpi-ping program, I have export
OMPI_MCA_btl_base_debug=2
in my shell.
Thanks
-Sridhar
-----Original Message-----
From: devel-boun...@open-mpi.org [mailto:devel-bounces@open-
mpi.org] On
Behalf Of Galen Shipman
Sent: Tuesday, August 09, 2005 11:10 PM
To: Open MPI Developers
Subject: Re: [O-MPI devel] Fwd: Regarding MVAPI Component in Open MPI
Hi
On Aug 9, 2005, at 8:15 AM, Sridhar Chirravuri wrote:
The same kind of output while running Pallas "pingpong" test.
-Sridhar
-----Original Message-----
From: devel-boun...@open-mpi.org [mailto:devel-boun...@open-mpi.org]
On
Behalf Of Sridhar Chirravuri
Sent: Tuesday, August 09, 2005 7:44 PM
To: Open MPI Developers
Subject: Re: [O-MPI devel] Fwd: Regarding MVAPI Component in Open MPI
I have run sendrecv function in Pallas but it failed to run it. Here
is
the output
[root@micrompi-2 SRC_PMB]# mpirun -np 2 PMB-MPI1 sendrecv
Could not join a running, existing universe
Establishing a new one named: default-universe-5097
[0,1,1][btl_mvapi.c:130:mca_btl_mvapi_del_procs] Stub
[0,1,1][btl_mvapi.c:130:mca_btl_mvapi_del_procs] Stub
[0,1,0][btl_mvapi.c:130:mca_btl_mvapi_del_procs] Stub
[0,1,0][btl_mvapi.c:130:mca_btl_mvapi_del_procs] Stub
[0,1,0][btl_mvapi_endpoint.c:542:mca_btl_mvapi_endpoint_send]
Connection
to endpoint closed ... connecting ...
[0,1,0][btl_mvapi_endpoint.c:
318:mca_btl_mvapi_endpoint_start_connect]
Initialized High Priority QP num = 263177, Low Priority QP num =
263178,
LID = 785
[0,1,0][btl_mvapi_endpoint.c:190:
mca_btl_mvapi_endpoint_send_connect_req
] Sending High Priority QP num = 263177, Low Priority QP num =
263178,
LID = 785[0,1,0][btl_mvapi_endpoint.c:
542:mca_btl_mvapi_endpoint_send]
Connection to endpoint closed ... connecting ...
[0,1,0][btl_mvapi_endpoint.c:
318:mca_btl_mvapi_endpoint_start_connect]
Initialized High Priority QP num = 263179, Low Priority QP num =
263180,
LID = 786
[0,1,0][btl_mvapi_endpoint.c:190:
mca_btl_mvapi_endpoint_send_connect_req
] Sending High Priority QP num = 263179, Low Priority QP num =
263180,
LID = 786#---------------------------------------------------
# PALLAS MPI Benchmark Suite V2.2, MPI-1 part
#---------------------------------------------------
# Date : Tue Aug 9 07:11:25 2005
# Machine : x86_64# System : Linux
# Release : 2.6.9-5.ELsmp
# Version : #1 SMP Wed Jan 5 19:29:47 EST 2005
#
# Minimum message length in bytes: 0
# Maximum message length in bytes: 4194304
#
# MPI_Datatype : MPI_BYTE
# MPI_Datatype for reductions : MPI_FLOAT
# MPI_Op : MPI_SUM
#
#
# List of Benchmarks to run:
# Sendrecv
[0,1,1][btl_mvapi_endpoint.c:368:
mca_btl_mvapi_endpoint_reply_start_conn
ect] Initialized High Priority QP num = 263177, Low Priority QP num =
263178, LID = 777
[0,1,1][btl_mvapi_endpoint.c:266:
mca_btl_mvapi_endpoint_set_remote_info]
Received High Priority QP num = 263177, Low Priority QP num 263178,
LID
= 785
[0,1,1][btl_mvapi_endpoint.c:
756:mca_btl_mvapi_endpoint_qp_init_query]
Modified to init..Qp
7080096[0,1,1][btl_mvapi_endpoint.c:791:
mca_btl_mvapi_endpoint_qp_init_q
uery] Modified to RTR..Qp
7080096[0,1,1][btl_mvapi_endpoint.c:814:
mca_btl_mvapi_endpoint_qp_init_q
uery] Modified to RTS..Qp 7080096
[0,1,1][btl_mvapi_endpoint.c:
756:mca_btl_mvapi_endpoint_qp_init_query]
Modified to init..Qp 7240736
[0,1,1][btl_mvapi_endpoint.c:
791:mca_btl_mvapi_endpoint_qp_init_query]
Modified to RTR..Qp
7240736[0,1,1][btl_mvapi_endpoint.c:814:
mca_btl_mvapi_endpoint_qp_init_q
uery] Modified to RTS..Qp 7240736
[0,1,1][btl_mvapi_endpoint.c:190:
mca_btl_mvapi_endpoint_send_connect_req
] Sending High Priority QP num = 263177, Low Priority QP num =
263178,
LID = 777
[0,1,0][btl_mvapi_endpoint.c:266:
mca_btl_mvapi_endpoint_set_remote_info]
Received High Priority QP num = 263177, Low Priority QP num 263178,
LID
= 777
[0,1,0][btl_mvapi_endpoint.c:
756:mca_btl_mvapi_endpoint_qp_init_query]
Modified to init..Qp 7081440
[0,1,0][btl_mvapi_endpoint.c:
791:mca_btl_mvapi_endpoint_qp_init_query]
Modified to RTR..Qp 7081440
[0,1,0][btl_mvapi_endpoint.c:
814:mca_btl_mvapi_endpoint_qp_init_query]
Modified to RTS..Qp 7081440
[0,1,0][btl_mvapi_endpoint.c:
756:mca_btl_mvapi_endpoint_qp_init_query]
Modified to init..Qp 7241888
[0,1,0][btl_mvapi_endpoint.c:
791:mca_btl_mvapi_endpoint_qp_init_query]
Modified to RTR..Qp
7241888[0,1,0][btl_mvapi_endpoint.c:814:
mca_btl_mvapi_endpoint_qp_init_q
uery] Modified to RTS..Qp 7241888
[0,1,1][btl_mvapi_component.c:523:mca_btl_mvapi_component_progress]
Got
a recv completion
Thanks
-Sridhar
-----Original Message-----
From: devel-boun...@open-mpi.org [mailto:devel-boun...@open-mpi.org]
On
Behalf Of Brian Barrett
Sent: Tuesday, August 09, 2005 7:35 PM
To: Open MPI Developers
Subject: Re: [O-MPI devel] Fwd: Regarding MVAPI Component in Open MPI
On Aug 9, 2005, at 8:48 AM, Sridhar Chirravuri wrote:
Does r6774 has lot of changes that are related to 3rd generation
point-to-point? I am trying to run some benchmark tests (ex:
pallas) with Open MPI stack and just want to compare the
performance figures with MVAPICH 095 and MVAPICH 092.
In order to use 3rd generation p2p communication, I have added the
following line in the /openmpi/etc/openmpi-mca-params.conf
pml=ob1
I also exported (as double check) OMPI_MCA_pml=ob1.
Then, I have tried running on the same machine. My machine has got
2 processors.
Mpirun -np 2 ./PMB-MPI1
I still see the following lines
Request for 0 bytes (coll_basic_reduce_scatter.c, 79)
Request for 0 bytes (coll_basic_reduce.c, 193)
Request for 0 bytes (coll_basic_reduce_scatter.c, 79)
Request for 0 bytes (coll_basic_reduce.c, 193)
These errors are coming from the collective routines, not the PML/BTL
layers. It looks like the reduction codes are trying to call malloc
(0), which doesn't work so well. We'll take a look as soon as we
can. In the mean time, can you just not run the tests that call the
reduction collectives?
Brian
--
Brian Barrett
Open MPI developer
http://www.open-mpi.org/
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
