I see you remove support for #if
defined(HAVE_STRUCT_IBV_DEVICE_TRANSPORT_TYPE) -- that doesn't seem
like a good idea. We still have users on older OFED's without that
field.
Can you create a 1.5 ticket for this item?
On Nov 1, 2009, at 6:44 AM, Vasily Philipov wrote:
> The attached patch adds support for RDMAoE (RDMA over Ethernet)
> devices
> to Openib BTL. The code changes are very minimal, actually we only
> modified the RDMACM code to provide better support for IB and RDMAoE
> devices. Please let me know if you have any comments.
>
> Regards,Vasily.
>
>
> diff -r 9aad663adc9f ompi/config/ompi_check_openib.m4
> --- a/ompi/config/ompi_check_openib.m4 Sun Oct 25 08:29:01
2009 -0700
> +++ b/ompi/config/ompi_check_openib.m4 Sun Nov 01 12:17:03
2009 +0200
> @@ -13,7 +13,7 @@
> # Copyright (c) 2006-2008 Cisco Systems, Inc. All rights reserved.
> # Copyright (c) 2006-2007 Los Alamos National Security, LLC. All
> rights
> # reserved.
> -# Copyright (c) 2006-2008 Mellanox Technologies. All rights
reserved.
> +# Copyright (c) 2006-2009 Mellanox Technologies. All rights
reserved.
> # $COPYRIGHT$
> #
> # Additional copyrights may follow
> @@ -204,6 +204,21 @@
> [$1_have_ibcm=1
> $1_LIBS="-libcm $$1_LIBS"])])
> fi
> +
> + # Check support for RDMAoE devices
> + $1_have_rdmaoe=0
> + AC_CHECK_DECLS([RDMA_TRANSPORT_RDMAOE],
> + [$1_have_rdmaoe=1], [],
> + [#include <infiniband/verbs.h>])
> +
> + AC_MSG_CHECKING([if RDMAoE support is enabled])
> + if test "1" = "$$1_have_rdmaoe"; then
> + AC_DEFINE_UNQUOTED([OMPI_HAVE_RDMAOE], [$
> $1_have_rdmaoe], [Enable RDMAoE support])
> + AC_MSG_RESULT([yes])
> + else
> + AC_MSG_RESULT([no])
> + fi
> +
> ])
>
> # Check to see if <infiniband/driver.h> works. It is known to
> diff -r 9aad663adc9f ompi/mca/btl/openib/btl_openib.c
> --- a/ompi/mca/btl/openib/btl_openib.c Sun Oct 25 08:29:01
2009 -0700
> +++ b/ompi/mca/btl/openib/btl_openib.c Sun Nov 01 12:17:03
2009 +0200
> @@ -354,6 +354,13 @@
> }
> #endif
>
> +#ifdef OMPI_HAVE_RDMAOE
> + if(RDMA_TRANSPORT_RDMAOE == (openib_btl-
> >ib_port_attr.transport) &&
> + OPAL_PROC_ON_LOCAL_NODE(ompi_proc->proc_flags)) {
> + continue;
> + }
> +#endif
> +
> if(NULL == (ib_proc =
> mca_btl_openib_proc_create(ompi_proc))) {
> return OMPI_ERR_OUT_OF_RESOURCE;
> }
> diff -r 9aad663adc9f ompi/mca/btl/openib/btl_openib_endpoint.c
> --- a/ompi/mca/btl/openib/btl_openib_endpoint.c Sun Oct 25
08:29:01
> 2009 -0700
> +++ b/ompi/mca/btl/openib/btl_openib_endpoint.c Sun Nov 01
12:17:03
> 2009 +0200
> @@ -556,7 +556,6 @@
> {
> /* If the CPC uses the CTS protocol, then start it up */
> if (endpoint->endpoint_local_cpc->cbm_uses_cts) {
> - int transport_type_ib_p = 0;
> /* Post our receives, which will make credit management
happy
> (i.e., rd_credits will be 0) */
> if (OMPI_SUCCESS !=
> mca_btl_openib_endpoint_post_recvs(endpoint)) {
> @@ -572,16 +571,13 @@
> receives this side's CTS). Also send the CTS if we
already
> received the peer's CTS (e.g., if this process was slow
to
> call cpc_complete(). */
> -#if defined(HAVE_STRUCT_IBV_DEVICE_TRANSPORT_TYPE)
> - transport_type_ib_p = (IBV_TRANSPORT_IB == endpoint-
> >endpoint_btl->device->ib_dev->transport_type);
> -#endif
> +
> OPAL_OUTPUT((-1, "cpc_complete to peer %s: is IB %d,
> initiatior %d, cts received: %d",
> endpoint->endpoint_proc->proc_ompi-
> >proc_hostname,
> transport_type_ib_p,
> endpoint->endpoint_initiator,
> endpoint->endpoint_cts_received));
> - if (transport_type_ib_p ||
> - endpoint->endpoint_initiator ||
> + if (endpoint->endpoint_initiator ||
> endpoint->endpoint_cts_received) {
> mca_btl_openib_endpoint_send_cts(endpoint);
>
> diff -r 9aad663adc9f ompi/mca/btl/openib/connect/base.h
> --- a/ompi/mca/btl/openib/connect/base.h Sun Oct 25 08:29:01
2009
> -0700
> +++ b/ompi/mca/btl/openib/connect/base.h Sun Nov 01 12:17:03
2009
> +0200
> @@ -1,6 +1,6 @@
> /*
> * Copyright (c) 2007-2008 Cisco Systems, Inc. All rights reserved.
> - *
> + * Copyright (c) 2009 Mellanox Technologies. All rights
> reserved.
> * $COPYRIGHT$
> *
> * Additional copyrights may follow
> @@ -13,6 +13,17 @@
>
> #include "connect/connect.h"
>
> +#ifdef OMPI_HAVE_RDMAOE
> +#define
> BTL_OPENIB_CONNECT_BASE_CHECK_IF_NOT_IB(btl) \
> + (((IBV_TRANSPORT_IB != ((btl)->device->ib_dev-
> >transport_type)) || \
> + (RDMA_TRANSPORT_RDMAOE == ((btl)-
> >ib_port_attr.transport))) ? \
> + true : false)
> +#else
> +#define
> BTL_OPENIB_CONNECT_BASE_CHECK_TRANSPORT_TYPE(btl) \
> + ((IBV_TRANSPORT_IB != ((btl)->device->ib_dev-
> >transport_type)) ? \
> + true : false)
> +#endif
> +
> BEGIN_C_DECLS
>
> /*
> diff -r 9aad663adc9f ompi/mca/btl/openib/connect/
> btl_openib_connect_ibcm.c
> --- a/ompi/mca/btl/openib/connect/btl_openib_connect_ibcm.c Sun
Oct
> 25 08:29:01 2009 -0700
> +++ b/ompi/mca/btl/openib/connect/btl_openib_connect_ibcm.c Sun
Nov
> 01 12:17:03 2009 +0200
> @@ -1,6 +1,6 @@
> /*
> * Copyright (c) 2007-2009 Cisco Systems, Inc. All rights reserved.
> - * Copyright (c) 2008 Mellanox Technologies. All rights
> reserved.
> + * Copyright (c) 2008-2009 Mellanox Technologies. All rights
> reserved.
> *
> * $COPYRIGHT$
> *
> @@ -653,7 +653,7 @@
> we're in an old version of OFED that is IB only (i.e., no
> iWarp), so we can safely assume that we can use this CPC. */
> #if defined(HAVE_STRUCT_IBV_DEVICE_TRANSPORT_TYPE)
> - if (IBV_TRANSPORT_IB != btl->device->ib_dev->transport_type) {
> + if (BTL_OPENIB_CONNECT_BASE_CHECK_IF_NOT_IB(btl)) {
> BTL_VERBOSE(("ibcm CPC only supported on InfiniBand; skipped
> on %s:%d",
> ibv_get_device_name(btl->device->ib_dev),
> openib_btl->port_num));
> diff -r 9aad663adc9f ompi/mca/btl/openib/connect/
> btl_openib_connect_oob.c
> --- a/ompi/mca/btl/openib/connect/btl_openib_connect_oob.c Sun
Oct
> 25 08:29:01 2009 -0700
> +++ b/ompi/mca/btl/openib/connect/btl_openib_connect_oob.c Sun
Nov
> 01 12:17:03 2009 +0200
> @@ -12,7 +12,7 @@
> * Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved.
> * Copyright (c) 2006 Los Alamos National Security, LLC. All
> rights
> * reserved.
> - * Copyright (c) 2008 Mellanox Technologies. All rights
> reserved.
> + * Copyright (c) 2008-2009 Mellanox Technologies. All rights
> reserved.
> *
> * $COPYRIGHT$
> *
> @@ -120,7 +120,7 @@
> transport_type member, then we must be < OFED v1.2, and
> therefore we must be IB. */
> #if defined(HAVE_STRUCT_IBV_DEVICE_TRANSPORT_TYPE)
> - if (IBV_TRANSPORT_IB != btl->device->ib_dev->transport_type) {
> + if (BTL_OPENIB_CONNECT_BASE_CHECK_IF_NOT_IB(btl)) {
> opal_output_verbose(5, mca_btl_base_output,
> "openib BTL: oob CPC only supported on
> InfiniBand; skipped on %s:%d",
> ibv_get_device_name(btl->device-
>ib_dev),
> diff -r 9aad663adc9f ompi/mca/btl/openib/connect/
> btl_openib_connect_rdmacm.c
> --- a/ompi/mca/btl/openib/connect/btl_openib_connect_rdmacm.c Sun
> Oct 25 08:29:01 2009 -0700
> +++ b/ompi/mca/btl/openib/connect/btl_openib_connect_rdmacm.c Sun
> Nov 01 12:17:03 2009 +0200
> @@ -1,7 +1,7 @@
> /*
> * Copyright (c) 2007-2009 Cisco Systems, Inc. All rights reserved.
> * Copyright (c) 2007-2008 Chelsio, Inc. All rights reserved.
> - * Copyright (c) 2008 Mellanox Technologies. All rights
> reserved.
> + * Copyright (c) 2008-2009 Mellanox Technologies. All rights
> reserved.
> * Copyright (c) 2009 Sandia National Laboratories. All rights
> reserved.
> *
> * $COPYRIGHT$
> @@ -857,34 +857,38 @@
> goto out;
> }
>
> - /* Post a single receive buffer on the smallest QP for the CTS
> - protocol */
> - if (mca_btl_openib_component.credits_qp == qpnum) {
> - struct ibv_recv_wr *bad_wr, *wr;
> + if(endpoint->endpoint_local_cpc->cbm_uses_cts) {
> + /* Post a single receive buffer on the smallest QP for the
> CTS
> + protocol */
> + if (mca_btl_openib_component.credits_qp == qpnum) {
> + struct ibv_recv_wr *bad_wr, *wr;
>
> - if (OMPI_SUCCESS !=
> - ompi_btl_openib_connect_base_alloc_cts(endpoint)) {
> - BTL_ERROR(("Failed to alloc CTS frag"));
> - goto out1;
> + if (OMPI_SUCCESS !=
> +
> ompi_btl_openib_connect_base_alloc_cts(endpoint)) {
> + BTL_ERROR(("Failed to alloc CTS frag"));
> + goto out1;
> + }
> + wr = &(endpoint->endpoint_cts_frag.rd_desc);
> + assert(NULL != wr);
> + wr->next = NULL;
> +
> + if (0 != ibv_post_recv(endpoint->qps[qpnum].qp->lcl_qp,
> + wr, &bad_wr)) {
> + BTL_ERROR(("failed to post CTS recv buffer"));
> + goto out1;
> + }
> + OPAL_OUTPUT((-1, "Posted CTS receiver buffer (%p) for
> peer %s, qp index %d (QP num %d), WR ID %p, SG addr %p, len %d, lkey
> %d",
> + (void*) wr->sg_list[0].addr,
> + endpoint->endpoint_proc->proc_ompi-
> >proc_hostname,
> + qpnum,
> + endpoint->qps[qpnum].qp->lcl_qp->qp_num,
> + (void*) wr->wr_id,
> + (void*) wr->sg_list[0].addr,
> + wr->sg_list[0].length,
> + wr->sg_list[0].lkey));
> }
> - wr = &(endpoint->endpoint_cts_frag.rd_desc);
> - assert(NULL != wr);
> - wr->next = NULL;
> -
> - if (0 != ibv_post_recv(endpoint->qps[qpnum].qp->lcl_qp,
> - wr, &bad_wr)) {
> - BTL_ERROR(("failed to post CTS recv buffer"));
> - goto out1;
> - }
> - OPAL_OUTPUT((-1, "Posted CTS receiver buffer (%p) for peer
> %s, qp index %d (QP num %d), WR ID %p, SG addr %p, len %d, lkey %d",
> - (void*) wr->sg_list[0].addr,
> - endpoint->endpoint_proc->proc_ompi-
> >proc_hostname,
> - qpnum,
> - endpoint->qps[qpnum].qp->lcl_qp->qp_num,
> - (void*) wr->wr_id,
> - (void*) wr->sg_list[0].addr,
> - wr->sg_list[0].length,
> - wr->sg_list[0].lkey));
> + } else { /* NOT IWARP */
> + mca_btl_openib_endpoint_post_recvs(endpoint);
> }
>
> /* Since the event id is already created (since we're the
server),
> @@ -1327,27 +1331,31 @@
> goto out;
> }
>
> - if (mca_btl_openib_component.credits_qp == context-
>qpnum) {
> - /* Post a single receive buffer on the smallest QP for
> the CTS
> - protocol */
> -
> - struct ibv_recv_wr *bad_wr, *wr;
> - assert(NULL != contents->endpoint-
> >endpoint_cts_frag.super.super.base.super.ptr);
> - wr = &(contents->endpoint->endpoint_cts_frag.rd_desc);
> - assert(NULL != wr);
> - wr->next = NULL;
> -
> - if (0 != ibv_post_recv(contents->endpoint->qps[context-
> >qpnum].qp->lcl_qp,
> - wr, &bad_wr)) {
> - BTL_ERROR(("failed to post CTS recv buffer"));
> - goto out1;
> + if (contents->endpoint->endpoint_local_cpc->cbm_uses_cts) {
> + if (mca_btl_openib_component.credits_qp == context-
> >qpnum) {
> + /* Post a single receive buffer on the smallest QP
> for the CTS
> + protocol */
> +
> + struct ibv_recv_wr *bad_wr, *wr;
> + assert(NULL != contents->endpoint-
> >endpoint_cts_frag.super.super.base.super.ptr);
> + wr = &(contents->endpoint-
> >endpoint_cts_frag.rd_desc);
> + assert(NULL != wr);
> + wr->next = NULL;
> +
> + if (0 != ibv_post_recv(contents->endpoint-
> >qps[context->qpnum].qp->lcl_qp,
> + wr, &bad_wr)) {
> + BTL_ERROR(("failed to post CTS recv buffer"));
> + goto out1;
> + }
> + OPAL_OUTPUT((-1, "Posted initiator CTS buffer (%p,
> length %d) for peer %s, qp index %d (QP num %d)",
> + (void*) wr->sg_list[0].addr,
> + wr->sg_list[0].length,
> + contents->endpoint->endpoint_proc-
> >proc_ompi->proc_hostname,
> + context->qpnum,
> + contents->endpoint->qps[context-
> >qpnum].qp->lcl_qp->qp_num));
> }
> - OPAL_OUTPUT((-1, "Posted initiator CTS buffer (%p,
> length %d) for peer %s, qp index %d (QP num %d)",
> - (void*) wr->sg_list[0].addr,
> - wr->sg_list[0].length,
> - contents->endpoint->endpoint_proc-
> >proc_ompi->proc_hostname,
> - context->qpnum,
> - contents->endpoint->qps[context-
>qpnum].qp-
> >lcl_qp->qp_num));
> + } else { /* NOT IWARP */
> + mca_btl_openib_endpoint_post_recvs(contents->endpoint);
> }
> } else {
> /* If we are establishing a connection in the "wrong"
> direction,
> @@ -1809,7 +1817,12 @@
> (*cpc)->cbm_finalize = NULL;
> /* Setting uses_cts=true also guarantees that we'll only be
> selected if QP 0 is PP */
> - (*cpc)->cbm_uses_cts = true;
> +
> + if(IBV_TRANSPORT_IWARP == (openib_btl->device->ib_dev-
> >transport_type)) {
> + (*cpc)->cbm_uses_cts = true;
> + } else {
> + (*cpc)->cbm_uses_cts = false;
> + }
>
> server = OBJ_NEW(rdmacm_contents_t);
> if (NULL == server) {
> <ATT1758013.txt>
--
Jeff Squyres
jsquy...@cisco.com
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
