I think you must be accidentally mixing Open MPI versions -- the file
"orte/runtime/orte_system_init.c" does not exist in the Open MPI v1.3
series. It did exist, however, back in the Open MPI 1.2 series.
Could you double check that the OMPI that is installed (and is being
found/used) on host-desktop1 is the same version as all the others?
On Nov 5, 2009, at 7:18 AM, Amit Sharma wrote:
I had built OMPI with "-mca rml_base_verbose 10 -mca
oob_base_verbose 10" but still no luck. On some machine, where
mpirun is working properly, it is giving correct debug messages as
below:
# mpirun -mca rml_base_verbose 10 -mca oob_base_verbose 10 arch
[linux] mca: base: components_open: Looking for rml components
[linux] mca: base: components_open: opening rml components
[linux] mca: base: components_open: found loaded component oob
[linux] mca: base: components_open: component oob has no register
function
[linux] mca: base: components_open: Looking for oob components
[linux] mca: base: components_open: opening oob components
[linux] mca: base: components_open: found loaded component tcp
[linux] mca: base: components_open: component tcp has no register
function
[linux] mca: base: components_open: component tcp open function
successful
[linux] mca: base: components_open: component oob open function
successful
[linux] orte_rml_base_select: initializing rml component oob
[linux] [[55739,0],0] rml:base:update:contact:info got uri
3652911104.0;tcp://128.88.143.227:39207
x86_64
[linux] mca: base: close: component tcp closed
[linux] mca: base: close: unloading component tcp
[linux] mca: base: close: component oob closed
[linux] mca: base: close: unloading component oob
#
But on the problem reported machine, still the problem is same. It
is not showing the debug messages. Directly it is giving the error
as below:
# mpirun arch
[NO-NAME] ORTE_ERROR_LOG: Not found in file runtime/
orte_init_stage1.c at
line 182
--------------------------------------------------------------------------
It looks like orte_init failed for some reason; your parallel
process is
likely to abort. There are many reasons that a parallel process can
fail
during orte_init; some of which are due to configuration or
environment
problems. This failure appears to be an internal failure; here's some
additional information (which may only be relevant to an Open MPI
developer):
orte_rml_base_select failed
--> Returned value -13 instead of ORTE_SUCCESS
--------------------------------------------------------------------------
[host-desktop1:09127] [NO-NAME] ORTE_ERROR_LOG: Not found in file
runtime/orte_system_init.c at line 42 [host-desktop1:09127] [NO-NAME]
ORTE_ERROR_LOG: Not found in file runtime/orte_init.c at line 52
--------------------------------------------------------------------------
Open RTE was unable to initialize properly. The error occured while
attempting to orte_init(). Returned value -13 instead of ORTE_SUCCESS.
--------------------------------------------------------------------------
Not getting the root cause of failure. Please guide.
Regards,
Amit Sharma
Sr. Software Engineer,
Wipro Technologies, Bangalore
From: rhc.open...@gmail.com [mailto:rhc.open...@gmail.com] On Behalf
Of Ralph Castain
Sent: Tuesday, November 03, 2009 11:08 PM
To: amit.shar...@wipro.com; Open MPI Developers
Subject: Re: [OMPI devel] orte_rml_base_select failed
No parameter will help - the issue is that we couldn't find a TCP
interface to use for wiring up the job. First thing you might check
is that you have a TCP interface alive and active - can be the
loopback interface, but you need at least something.
If you do have an interface, then you might rebuild OMPI with --
enable-debug so you can get some diagnostics. Then run the job again
with
-mca rml_base_verbose 10 -mca oob_base_verbose 10
and see what diagnostic error messages emerge.
On Tue, Nov 3, 2009 at 4:42 AM, Amit Sharma <amit.shar...@wipro.com>
wrote:
Hi,
I am using open-mpi version 1.3.2. on SLES 11 machine. I have built it
simply like ./configure => make => make install.
I am facing the following error with mpirun on some machines.
Root # mpirun -np 2 ls
[NO-NAME] ORTE_ERROR_LOG: Not found in file runtime/
orte_init_stage1.c at
line 182
--------------------------------------------------------------------------
It looks like orte_init failed for some reason; your parallel
process is
likely to abort. There are many reasons that a parallel process can
fail
during orte_init; some of which are due to configuration or
environment
problems. This failure appears to be an internal failure; here's some
additional information (which may only be relevant to an Open MPI
developer):
orte_rml_base_select failed
--> Returned value -13 instead of ORTE_SUCCESS
--------------------------------------------------------------------------
[host-desktop1:09127] [NO-NAME] ORTE_ERROR_LOG: Not found in file
runtime/orte_system_init.c at line 42 [host-desktop1:09127] [NO-NAME]
ORTE_ERROR_LOG: Not found in file runtime/orte_init.c at line 52
--------------------------------------------------------------------------
Open RTE was unable to initialize properly. The error occured while
attempting to orte_init(). Returned value -13 instead of ORTE_SUCCESS.
--------------------------------------------------------------------------
Can you please guide me to resolve this issue. Is there any run time
environmental variable be set to get rid of this issue?
Thanks in Advance,
Amit
Please do not print this email unless it is absolutely necessary.
The information contained in this electronic message and any
attachments to this message are intended for the exclusive use of
the addressee(s) and may contain proprietary, confidential or
privileged information. If you are not the intended recipient, you
should not disseminate, distribute or copy this e-mail. Please
notify the sender immediately and destroy all copies of this message
and any attachments.
WARNING: Computer viruses can be transmitted via email. The
recipient should check this email and any attachments for the
presence of viruses. The company accepts no liability for any damage
caused by any virus transmitted by this email.
www.wipro.com
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
Please do not print this email unless it is absolutely necessary.
The information contained in this electronic message and any
attachments to this message are intended for the exclusive use of
the addressee(s) and may contain proprietary, confidential or
privileged information. If you are not the intended recipient, you
should not disseminate, distribute or copy this e-mail. Please
notify the sender immediately and destroy all copies of this message
and any attachments.
WARNING: Computer viruses can be transmitted via email. The
recipient should check this email and any attachments for the
presence of viruses. The company accepts no liability for any damage
caused by any virus transmitted by this email.
www.wipro.com
_______________________________________________
devel mailing list
de...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/devel
--
Jeff Squyres
jsquy...@cisco.com
