Hi Ralph, I tried with the trunk and it makes no difference for me.
Looking at potential differences, I found out something strange. The bug may have something to do with the "routed" framework. I can reproduce the bug with binomial and direct, but not with cm and linear (you disabled the build of the latest in your configure options -- why ?).
Btw, all components have a 0 priority and none is defined to be the default component. Which one is the default then ? binomial (as the first in alphabetical order) ?
Can you check which one you are using and try with binomial explicitely chosen ?
Thanks for your time, Sylvain On Thu, 26 Nov 2009, Ralph Castain wrote:
Hi Sylvain Well, I hate to tell you this, but I cannot reproduce the "bug" even with this code in ORTE no matter what value of ORTE_RELAY_DELAY I use. The system runs really slow as I increase the delay, but it completes the job just fine. I ran jobs across 16 nodes on a slurm machine, 1-4 ppn, a "hello world" app that calls MPI_Init immediately upon execution. So I have to conclude this is a problem in your setup/config. Are you sure you didn't --enable-progress-threads?? That is the only way I can recreate this behavior. I plan to modify the relay/message processing method anyway to clean it up. But there doesn't appear to be anything wrong with the current code. Ralph On Nov 20, 2009, at 6:55 AM, Sylvain Jeaugey wrote:Hi Ralph, Thanks for your efforts. I will look at our configuration and see how it may differ from ours. Here is a patch which helps reproducing the bug even with a small number of nodes. diff -r b622b9e8f1ac orte/orted/orted_comm.c --- a/orte/orted/orted_comm.c Wed Nov 18 09:27:55 2009 +0100 +++ b/orte/orted/orted_comm.c Fri Nov 20 14:47:39 2009 +0100 @@ -126,6 +126,13 @@ ORTE_ERROR_LOG(ret); goto CLEANUP; } + { /* Add delay to reproduce bug */ + char * str = getenv("ORTE_RELAY_DELAY"); + int sec = str ? atoi(str) : 0; + if (sec) { + sleep(sec); + } + } } CLEANUP: Just set ORTE_RELAY_DELAY to 1 (second) and you should reproduce the bug. During our experiments, the bug disappeared when we added a delay before calling MPI_Init. So, configurations where processes are launched slowly or take some time before MPI_Init should be immune to this bug. We usually reproduce the bug with one ppn (faster to spawn). Sylvain On Thu, 19 Nov 2009, Ralph Castain wrote:Hi Sylvain I've spent several hours trying to replicate the behavior you described on clusters up to a couple of hundred nodes (all running slurm), without success. I'm becoming increasingly convinced that this is a configuration issue as opposed to a code issue. I have enclosed the platform file I use below. Could you compare it to your configuration? I'm wondering if there is something critical about the config that may be causing the problem (perhaps we have a problem in our default configuration). Also, is there anything else you can tell us about your configuration? How many ppn triggers it, or do you always get the behavior every time you launch over a certain number of nodes? Meantime, I will look into this further. I am going to introduce a "slow down" param that will force the situation you encountered - i.e., will ensure that the relay is still being sent when the daemon receives the first collective input. We can then use that to try and force replication of the behavior you are encountering. Thanks Ralph enable_dlopen=no enable_pty_support=no with_blcr=no with_openib=yes with_memory_manager=no enable_mem_debug=yes enable_mem_profile=no enable_debug_symbols=yes enable_binaries=yes with_devel_headers=yes enable_heterogeneous=no enable_picky=yes enable_debug=yes enable_shared=yes enable_static=yes with_slurm=yes enable_contrib_no_build=libnbc,vt enable_visibility=yes enable_memchecker=no enable_ipv6=no enable_mpi_f77=no enable_mpi_f90=no enable_mpi_cxx=no enable_mpi_cxx_seek=no enable_mca_no_build=pml-dr,pml-crcp2,crcp enable_io_romio=no On Nov 19, 2009, at 8:08 AM, Ralph Castain wrote:On Nov 19, 2009, at 7:52 AM, Sylvain Jeaugey wrote:Thank you Ralph for this precious help. I setup a quick-and-dirty patch basically postponing process_msg (hence daemon_collective) until the launch is done. In process_msg, I therefore requeue a process_msg handler and return.That is basically the idea I proposed, just done in a slightly different placeIn this "all-must-be-non-blocking-and-done-through-opal_progress" algorithm, I don't think that blocking calls like the one in daemon_collective should be allowed. This also applies to the blocking one in send_relay. [Well, actually, one is okay, 2 may lead to interlocking.]Well, that would be problematic - you will find "progressed_wait" used repeatedly in the code. Removing them all would take a -lot- of effort and a major rewrite. I'm not yet convinced it is required. There may be something strange in how you are setup, or your cluster - like I said, this is the first report of a problem we have had, and people with much bigger slurm clusters have been running this code every day for over a year.If you have time doing a nicer patch, it would be great and I would be happy to test it. Otherwise, I will try to implement your idea properly next week (with my limited knowledge of orted).Either way is fine - I'll see if I can get to it. Thanks RalphFor the record, here is the patch I'm currently testing at large scale : diff -r ec68298b3169 -r b622b9e8f1ac orte/mca/grpcomm/bad/grpcomm_bad_module.c --- a/orte/mca/grpcomm/bad/grpcomm_bad_module.c Mon Nov 09 13:29:16 2009 +0100 +++ b/orte/mca/grpcomm/bad/grpcomm_bad_module.c Wed Nov 18 09:27:55 2009 +0100 @@ -687,14 +687,6 @@ opal_list_append(&orte_local_jobdata, &jobdat->super); } - /* it may be possible to get here prior to having actually finished processing our - * local launch msg due to the race condition between different nodes and when - * they start their individual procs. Hence, we have to first ensure that we - * -have- finished processing the launch msg, or else we won't know whether - * or not to wait before sending this on - */ - ORTE_PROGRESSED_WAIT(jobdat->launch_msg_processed, 0, 1); - /* unpack the collective type */ n = 1; if (ORTE_SUCCESS != (rc = opal_dss.unpack(data, &jobdat->collective_type, &n, ORTE_GRPCOMM_COLL_T))) { @@ -894,6 +886,28 @@ proc = &mev->sender; buf = mev->buffer; + + jobdat = NULL; + for (item = opal_list_get_first(&orte_local_jobdata); + item != opal_list_get_end(&orte_local_jobdata); + item = opal_list_get_next(item)) { + jobdat = (orte_odls_job_t*)item; + + /* is this the specified job? */ + if (jobdat->jobid == proc->jobid) { + break; + } + } + if (NULL == jobdat || jobdat->launch_msg_processed != 1) { + /* it may be possible to get here prior to having actually finished processing our + * local launch msg due to the race condition between different nodes and when + * they start their individual procs. Hence, we have to first ensure that we + * -have- finished processing the launch msg. Requeue this event until it is done. + */ + int tag = &mev->tag; + ORTE_MESSAGE_EVENT(proc, buf, tag, process_msg); + return; + } /* is the sender a local proc, or a daemon relaying the collective? */ if (ORTE_PROC_MY_NAME->jobid == proc->jobid) { Sylvain On Thu, 19 Nov 2009, Ralph Castain wrote:Very strange. As I said, we routinely launch jobs spanning several hundred nodes without problem. You can see the platform files for that setup in contrib/platform/lanl/tlcc That said, it is always possible you are hitting some kind of race condition we don't hit. In looking at the code, one possibility would be to make all the communications flow through the daemon cmd processor in orte/orted_comm.c. This is the way it used to work until I reorganized the code a year ago for other reasons that never materialized. Unfortunately, the daemon collective has to wait until the local launch cmd has been completely processed so it can know whether or not to wait for contributions from local procs before sending along the collective message, so this kinda limits our options. About the only other thing you could do would be to not send the relay at all until -after- processing the local launch cmd. You can then remove the "wait" in the daemon collective as you will know how many local procs are involved, if any. I used to do it that way and it guarantees it will work. The negative is that we lose some launch speed as the next nodes in the tree don't get the launch message until this node finishes launching all its procs. The way around that, of course, would be to: 1. process the launch message, thus extracting the number of any local procs and setting up all data structures...but do -not- launch the procs at this time (as this is what takes all the time) 2. send the relay - the daemon collective can now proceed without a "wait" in it 3. now launch the local procs It would be a fairly simple reorganization of the code in the orte/mca/odls area. I can do it this weekend if you like, or you can do it - either way is fine, but if you do it, please contribute it back to the trunk. Ralph On Nov 19, 2009, at 1:39 AM, Sylvain Jeaugey wrote:I would say I use the default settings, i.e. I don't set anything "special" at configure. I'm launching my processes with SLURM (salloc + mpirun). Sylvain On Wed, 18 Nov 2009, Ralph Castain wrote:How did you configure OMPI? What launch mechanism are you using - ssh? On Nov 17, 2009, at 9:01 AM, Sylvain Jeaugey wrote:I don't think so, and I'm not doing it explicitely at least. How do I know ? Sylvain On Tue, 17 Nov 2009, Ralph Castain wrote:We routinely launch across thousands of nodes without a problem...I have never seen it stick in this fashion. Did you build and/or are using ORTE threaded by any chance? If so, that definitely won't work. On Nov 17, 2009, at 9:27 AM, Sylvain Jeaugey wrote:Hi all, We are currently experiencing problems at launch on the 1.5 branch on relatively large number of nodes (at least 80). Some processes are not spawned and orted processes are deadlocked. When MPI processes are calling MPI_Init before send_relay is complete, the send_relay function and the daemon_collective function are doing a nice interlock : Here is the scenario :send_relayperforms the send tree :orte_rml_oob_send_buffer orte_rml_oob_send opal_wait_conditionWaiting on completion from send thus calling opal_progress()opal_progress()But since a collective request arrived from the network, entered :daemon_collectiveHowever, daemon_collective is waiting for the job to be initialized (wait on jobdat->launch_msg_processed) before continuing, thus calling :opal_progress()At this time, the send may complete, but since we will never go back to orte_rml_oob_send, we will never perform the launch (setting jobdat->launch_msg_processed to 1). I may try to solve the bug (this is quite a top priority problem for me), but maybe people who are more familiar with orted than I am may propose a nice and clean solution ... For those who like real (and complete) gdb stacks, here they are : #0 0x0000003b7fed4f38 in poll () from /lib64/libc.so.6 #1 0x00007fd0de5d861a in poll_dispatch (base=0x930230, arg=0x91a4b0, tv=0x7fff0d977880) at poll.c:167 #2 0x00007fd0de5d586f in opal_event_base_loop (base=0x930230, flags=1) at event.c:823 #3 0x00007fd0de5d556b in opal_event_loop (flags=1) at event.c:746 #4 0x00007fd0de5aeb6d in opal_progress () at runtime/opal_progress.c:189 #5 0x00007fd0dd340a02 in daemon_collective (sender=0x97af50, data=0x97b010) at grpcomm_bad_module.c:696 #6 0x00007fd0dd341809 in process_msg (fd=-1, opal_event=1, data=0x97af20) at grpcomm_bad_module.c:901 #7 0x00007fd0de5d5334 in event_process_active (base=0x930230) at event.c:667 #8 0x00007fd0de5d597a in opal_event_base_loop (base=0x930230, flags=1) at event.c:839 #9 0x00007fd0de5d556b in opal_event_loop (flags=1) at event.c:746 #10 0x00007fd0de5aeb6d in opal_progress () at runtime/opal_progress.c:189 #11 0x00007fd0dd340a02 in daemon_collective (sender=0x979700, data=0x9676e0) at grpcomm_bad_module.c:696 #12 0x00007fd0dd341809 in process_msg (fd=-1, opal_event=1, data=0x9796d0) at grpcomm_bad_module.c:901 #13 0x00007fd0de5d5334 in event_process_active (base=0x930230) at event.c:667 #14 0x00007fd0de5d597a in opal_event_base_loop (base=0x930230, flags=1) at event.c:839 #15 0x00007fd0de5d556b in opal_event_loop (flags=1) at event.c:746 #16 0x00007fd0de5aeb6d in opal_progress () at runtime/opal_progress.c:189 #17 0x00007fd0dd340a02 in daemon_collective (sender=0x97b420, data=0x97b4e0) at grpcomm_bad_module.c:696 #18 0x00007fd0dd341809 in process_msg (fd=-1, opal_event=1, data=0x97b3f0) at grpcomm_bad_module.c:901 #19 0x00007fd0de5d5334 in event_process_active (base=0x930230) at event.c:667 #20 0x00007fd0de5d597a in opal_event_base_loop (base=0x930230, flags=1) at event.c:839 #21 0x00007fd0de5d556b in opal_event_loop (flags=1) at event.c:746 #22 0x00007fd0de5aeb6d in opal_progress () at runtime/opal_progress.c:189 #23 0x00007fd0dd969a8a in opal_condition_wait (c=0x97b210, m=0x97b1a8) at ../../../../opal/threads/condition.h:99 #24 0x00007fd0dd96a4bf in orte_rml_oob_send (peer=0x7fff0d9785a0, iov=0x7fff0d978530, count=1, tag=1, flags=16) at rml_oob_send.c:153 #25 0x00007fd0dd96ac4d in orte_rml_oob_send_buffer (peer=0x7fff0d9785a0, buffer=0x7fff0d9786b0, tag=1, flags=0) at rml_oob_send.c:270 #26 0x00007fd0de86ed2a in send_relay (buf=0x7fff0d9786b0) at orted/orted_comm.c:127 #27 0x00007fd0de86f6de in orte_daemon_cmd_processor (fd=-1, opal_event=1, data=0x965fc0) at orted/orted_comm.c:308 #28 0x00007fd0de5d5334 in event_process_active (base=0x930230) at event.c:667 #29 0x00007fd0de5d597a in opal_event_base_loop (base=0x930230, flags=0) at event.c:839 #30 0x00007fd0de5d556b in opal_event_loop (flags=0) at event.c:746 #31 0x00007fd0de5d5418 in opal_event_dispatch () at event.c:682 #32 0x00007fd0de86e339 in orte_daemon (argc=19, argv=0x7fff0d979ca8) at orted/orted_main.c:769 #33 0x00000000004008e2 in main (argc=19, argv=0x7fff0d979ca8) at orted.c:62 Thanks in advance, Sylvain _______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel_______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel
