Are you going to develop anything further with regards to this functionality, 
and target that stuff for v1.7?  Or should all of this just wait until 1.9?

(I don't really care either way; I'm asking out of curiosity)


On Jan 22, 2013, at 7:24 PM, George Bosilca <bosi...@icl.utk.edu> wrote:

> Nobody cared about error cases so far, I don't personally see any incentive 
> to push this patch in the 1.7 right now. But I won't be against as it is not 
> hurting either.
> 
>  George.
> 
> 
> On Jan 22, 2013, at 16:28 , "Jeff Squyres (jsquyres)" <jsquy...@cisco.com> 
> wrote:
> 
>> George --
>> 
>> Similar question on this one: should it be CMR'ed to v1.7?  (I kinda doubt 
>> it's appropriate for v1.6)
>> 
>> 
>> On Jan 21, 2013, at 6:41 AM, svn-commit-mai...@open-mpi.org wrote:
>> 
>>> Author: bosilca (George Bosilca)
>>> Date: 2013-01-21 06:41:08 EST (Mon, 21 Jan 2013)
>>> New Revision: 27881
>>> URL: https://svn.open-mpi.org/trac/ompi/changeset/27881
>>> 
>>> Log:
>>> Make the TCP BTL really fail-safe. It now trigger the error callback on
>>> all pending fragments when the destination goes down. This allows the PML
>>> to recalibrate its behavior, either find an alternate route or just give up.
>>> 
>>> Text files modified: 
>>> trunk/ompi/mca/btl/tcp/btl_tcp_endpoint.c |    29 
>>> +++++++++++++++++++++++++++--           
>>> trunk/ompi/mca/btl/tcp/btl_tcp_frag.c     |     7 ++++++-                   
>>>               
>>> trunk/ompi/mca/btl/tcp/btl_tcp_proc.c     |     2 +-                        
>>>               
>>> 3 files changed, 34 insertions(+), 4 deletions(-)
>>> 
>>> Modified: trunk/ompi/mca/btl/tcp/btl_tcp_endpoint.c
>>> ==============================================================================
>>> --- trunk/ompi/mca/btl/tcp/btl_tcp_endpoint.c       Mon Jan 21 06:35:42 
>>> 2013        (r27880)
>>> +++ trunk/ompi/mca/btl/tcp/btl_tcp_endpoint.c       2013-01-21 06:41:08 EST 
>>> (Mon, 21 Jan 2013)      (r27881)
>>> @@ -2,7 +2,7 @@
>>> * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
>>> *                         University Research and Technology
>>> *                         Corporation.  All rights reserved.
>>> - * Copyright (c) 2004-2008 The University of Tennessee and The University
>>> + * Copyright (c) 2004-2013 The University of Tennessee and The University
>>> *                         of Tennessee Research Foundation.  All rights
>>> *                         reserved.
>>> * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
>>> @@ -295,6 +295,7 @@
>>>           if(opal_socket_errno != EINTR && opal_socket_errno != EAGAIN && 
>>> opal_socket_errno != EWOULDBLOCK) {
>>>               BTL_ERROR(("send() failed: %s (%d)",
>>>                          strerror(opal_socket_errno), opal_socket_errno));
>>> +                btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>               mca_btl_tcp_endpoint_close(btl_endpoint);
>>>               return -1;
>>>           }
>>> @@ -359,6 +360,7 @@
>>>       mca_btl_tcp_endpoint_close(btl_endpoint);
>>>       btl_endpoint->endpoint_sd = sd;
>>>       if(mca_btl_tcp_endpoint_send_connect_ack(btl_endpoint) != 
>>> OMPI_SUCCESS) {
>>> +            btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>           mca_btl_tcp_endpoint_close(btl_endpoint);
>>>           OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
>>>           OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
>>> @@ -389,7 +391,6 @@
>>> {
>>>   if(btl_endpoint->endpoint_sd < 0)
>>>       return;
>>> -    btl_endpoint->endpoint_state = MCA_BTL_TCP_CLOSED;
>>>   btl_endpoint->endpoint_retries++;
>>>   opal_event_del(&btl_endpoint->endpoint_recv_event);
>>>   opal_event_del(&btl_endpoint->endpoint_send_event);
>>> @@ -401,6 +402,24 @@
>>>   btl_endpoint->endpoint_cache_pos    = NULL;
>>>   btl_endpoint->endpoint_cache_length = 0;
>>> #endif  /* MCA_BTL_TCP_ENDPOINT_CACHE */
>>> +    /**
>>> +     * If we keep failing to connect to the peer let the caller know about
>>> +     * this situation by triggering all the pending fragments callback and
>>> +     * reporting the error.
>>> +     */
>>> +    if( MCA_BTL_TCP_FAILED == btl_endpoint->endpoint_state ) {
>>> +        mca_btl_tcp_frag_t* frag = btl_endpoint->endpoint_send_frag;
>>> +        if( NULL == frag ) 
>>> +            frag = 
>>> (mca_btl_tcp_frag_t*)opal_list_remove_first(&btl_endpoint->endpoint_frags);
>>> +        while(NULL != frag) {
>>> +            frag->base.des_cbfunc(&frag->btl->super, frag->endpoint, 
>>> &frag->base, OMPI_ERR_UNREACH);
>>> +
>>> +            frag = 
>>> (mca_btl_tcp_frag_t*)opal_list_remove_first(&btl_endpoint->endpoint_frags);
>>> +        }
>>> +    } else {
>>> +        btl_endpoint->endpoint_state = MCA_BTL_TCP_CLOSED;
>>> +    }
>>> +
>>> }
>>> 
>>> /*
>>> @@ -444,6 +463,7 @@
>>> 
>>>       /* remote closed connection */
>>>       if(retval == 0) {
>>> +            btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>           mca_btl_tcp_endpoint_close(btl_endpoint);
>>>           return -1;
>>>       }
>>> @@ -453,6 +473,7 @@
>>>           if(opal_socket_errno != EINTR && opal_socket_errno != EAGAIN && 
>>> opal_socket_errno != EWOULDBLOCK) {
>>>               BTL_ERROR(("recv(%d) failed: %s (%d)",
>>>                          btl_endpoint->endpoint_sd, 
>>> strerror(opal_socket_errno), opal_socket_errno));
>>> +                btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>               mca_btl_tcp_endpoint_close(btl_endpoint);
>>>               return -1;
>>>           }
>>> @@ -589,6 +610,7 @@
>>>                           address,
>>>                          btl_endpoint->endpoint_addr->addr_port, 
>>> strerror(opal_socket_errno) ) );
>>>       }
>>> +        btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>       mca_btl_tcp_endpoint_close(btl_endpoint);
>>>       btl_endpoint->endpoint_retries++;
>>>       return OMPI_ERR_UNREACH;
>>> @@ -599,6 +621,7 @@
>>>       btl_endpoint->endpoint_state = MCA_BTL_TCP_CONNECT_ACK;
>>>       opal_event_add(&btl_endpoint->endpoint_recv_event, 0);
>>>   } else {
>>> +        btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>       mca_btl_tcp_endpoint_close(btl_endpoint);
>>>   }
>>>   return rc;
>>> @@ -645,6 +668,7 @@
>>>       btl_endpoint->endpoint_state = MCA_BTL_TCP_CONNECT_ACK;
>>>       opal_event_add(&btl_endpoint->endpoint_recv_event, 0);
>>>   } else {
>>> +        btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>       mca_btl_tcp_endpoint_close(btl_endpoint);
>>>   }
>>> }
>>> @@ -747,6 +771,7 @@
>>>   default:
>>>       OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
>>>       BTL_ERROR(("invalid socket state(%d)", btl_endpoint->endpoint_state));
>>> +        btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>       mca_btl_tcp_endpoint_close(btl_endpoint);
>>>       break;
>>>   }
>>> 
>>> Modified: trunk/ompi/mca/btl/tcp/btl_tcp_frag.c
>>> ==============================================================================
>>> --- trunk/ompi/mca/btl/tcp/btl_tcp_frag.c   Mon Jan 21 06:35:42 2013        
>>> (r27880)
>>> +++ trunk/ompi/mca/btl/tcp/btl_tcp_frag.c   2013-01-21 06:41:08 EST (Mon, 
>>> 21 Jan 2013)      (r27881)
>>> @@ -2,7 +2,7 @@
>>> * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
>>> *                         University Research and Technology
>>> *                         Corporation.  All rights reserved.
>>> - * Copyright (c) 2004-2006 The University of Tennessee and The University
>>> + * Copyright (c) 2004-2013 The University of Tennessee and The University
>>> *                         of Tennessee Research Foundation.  All rights
>>> *                         reserved.
>>> * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
>>> @@ -115,12 +115,14 @@
>>>               BTL_ERROR(("mca_btl_tcp_frag_send: writev error (%p, 
>>> %lu)\n\t%s(%lu)\n",
>>>                   frag->iov_ptr[0].iov_base, (unsigned long) 
>>> frag->iov_ptr[0].iov_len,
>>>                   strerror(opal_socket_errno), (unsigned long) 
>>> frag->iov_cnt));
>>> +                frag->endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>               mca_btl_tcp_endpoint_close(frag->endpoint);
>>>               return false;
>>>           default:
>>>               BTL_ERROR(("mca_btl_tcp_frag_send: writev failed: %s (%d)", 
>>>                          strerror(opal_socket_errno),
>>>                          opal_socket_errno));
>>> +                frag->endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>               mca_btl_tcp_endpoint_close(frag->endpoint);
>>>               return false;
>>>           }
>>> @@ -195,6 +197,7 @@
>>>       cnt = readv(sd, frag->iov_ptr, num_vecs);
>>>     if( 0 < cnt ) goto advance_iov_position;
>>>     if( cnt == 0 ) {
>>> +            btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>         mca_btl_tcp_endpoint_close(btl_endpoint);
>>>         return false;
>>>     }
>>> @@ -207,12 +210,14 @@
>>>           BTL_ERROR(("mca_btl_tcp_frag_recv: readv error (%p, 
>>> %lu)\n\t%s(%lu)\n",
>>>                      frag->iov_ptr[0].iov_base, (unsigned long) 
>>> frag->iov_ptr[0].iov_len,
>>>                      strerror(opal_socket_errno), (unsigned long) 
>>> frag->iov_cnt));
>>> +            btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>         mca_btl_tcp_endpoint_close(btl_endpoint);
>>>         return false;
>>>     default:
>>>           BTL_ERROR(("mca_btl_tcp_frag_recv: readv failed: %s (%d)", 
>>>                      strerror(opal_socket_errno),
>>>                      opal_socket_errno));
>>> +            btl_endpoint->endpoint_state = MCA_BTL_TCP_FAILED;
>>>         mca_btl_tcp_endpoint_close(btl_endpoint);
>>>         return false;
>>>     }
>>> 
>>> Modified: trunk/ompi/mca/btl/tcp/btl_tcp_proc.c
>>> ==============================================================================
>>> --- trunk/ompi/mca/btl/tcp/btl_tcp_proc.c   Mon Jan 21 06:35:42 2013        
>>> (r27880)
>>> +++ trunk/ompi/mca/btl/tcp/btl_tcp_proc.c   2013-01-21 06:41:08 EST (Mon, 
>>> 21 Jan 2013)      (r27881)
>>> @@ -680,7 +680,7 @@
>>> {
>>>   size_t i;
>>>   OPAL_THREAD_LOCK(&btl_proc->proc_lock);
>>> -    for(i=0; i<btl_proc->proc_endpoint_count; i++) {
>>> +    for(i = 0; i < btl_proc->proc_endpoint_count; i++) {
>>>       if(btl_proc->proc_endpoints[i] == btl_endpoint) {
>>>           memmove(btl_proc->proc_endpoints+i, btl_proc->proc_endpoints+i+1,
>>>               
>>> (btl_proc->proc_endpoint_count-i-1)*sizeof(mca_btl_base_endpoint_t*));
>>> _______________________________________________
>>> svn-full mailing list
>>> svn-f...@open-mpi.org
>>> http://www.open-mpi.org/mailman/listinfo.cgi/svn-full
>> 
>> 
>> -- 
>> Jeff Squyres
>> jsquy...@cisco.com
>> For corporate legal information go to: 
>> http://www.cisco.com/web/about/doing_business/legal/cri/
>> 
>> 
>> _______________________________________________
>> devel mailing list
>> de...@open-mpi.org
>> http://www.open-mpi.org/mailman/listinfo.cgi/devel
> 
> 
> _______________________________________________
> devel mailing list
> de...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/devel


-- 
Jeff Squyres
jsquy...@cisco.com
For corporate legal information go to: 
http://www.cisco.com/web/about/doing_business/legal/cri/


Reply via email to