Vasily, I am not able to reproduce this at all. I just did a fresh checkout of the trunk. As explained, it was truncated. I did as Jeff and Brian suggested and did 'svn up .' a couple of times (had to do 'svn cleanup' first to unlock some files apparently). I did a vpath build as you describe, and have no problems building and installing the entire project - no m4 hacks necessary.
Josh -----Original Message----- From: devel-boun...@open-mpi.org [mailto:devel-boun...@open-mpi.org] On Behalf Of Vasiliy Sent: Monday, July 01, 2013 12:42 PM To: Jeff Squyres (jsquyres) Cc: Open MPI Developers Subject: Re: [OMPI devel] aclocal-1.14: error: ../../config/autogen_found_items.m4:274: file 'opal/mca/backtrace/configure.m4' does not exist Thank you, Jeff. However, I've got it working by rewriting 'include' strings in 'autogen_found_items.m4' from relative to absolute paths. As the M4 file is being, actually, generated rather than it exists in the svn tree, one has a short temporal window, just few seconds before it's getting executed, to rewrite again the M4 file. Interestingly enough, the relative paths in 'autogen_found_items.m4' work ok at some first point of configuring, while they do not upon its second use (what is that second operational directory?). Here's what I've finally got: config.status: executing libtool commands CDPATH="${ZSH_VERSION+.}:" && cd /usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0 && /bin/sh /usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0/config/missing aclocal-1.14 -I config CDPATH="${ZSH_VERSION+.}:" && cd /usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0 && /bin/sh /usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0/config/missing autoconf cd /usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0 && /bin/sh /usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0/config/missing automake-1.14 --foreign /bin/sh ./config.status --recheck The issue pops up while using option "2" VPATH as described here: http://svn.open-mpi.org/svn/ompi/trunk/HACKING On Mon, Jul 1, 2013 at 5:51 PM, Jeff Squyres (jsquyres) <jsquy...@cisco.com> wrote: > If it helps, here's the output from when I run autogen. > > > > On Jul 1, 2013, at 10:57 AM, Ralph Castain <r...@open-mpi.org> wrote: > >> Hmmm...well, I'm not sure what I can do to help. I have to agree with >> Jeff that something has gotten really messed up in your checkout or >> system. You might check to ensure you are picking up the right >> autotools, and perhaps re-checkout the trunk. >> >> All I can tell you is that it is building just fine on both my Mac >> and Linux boxes. >> >> On Jul 1, 2013, at 7:41 AM, Vasiliy <testtest_2...@ukr.net> wrote: >> >>> Dear Ralph, I believe I have run autogen.pl after a fresh full >>> checkout, and not yet after an update: >>> >>> Open MPI autogen (buckle up!) >>> >>> 1. Checking tool versions >>> >>> Searching for autoconf >>> <stripped> >>> ... >>> - from my log >>> >>> How ../../config/autogen_found_items.m4:274 is supposed to find >>> 'opal/mca/backtrace/configure.m4' if it operates in 'opal/libltdl' ? >>> >>> Vasiliy >>> >>> >>> On Mon, Jul 1, 2013 at 4:07 PM, Ralph Castain wrote: >>>> Or you might try rerunning autogen.pl in case you updated and >>>> didn't catch that something requiring autogen changed >>>> >>>> On Jul 1, 2013, at 7:02 AM, "Jeff Squyres (jsquyres)" wrote: >>>> >>>>> Sounds like you have a busted SVN checkout -- that file exists for me: >>>>> >>>>> [10:02] jsquyres-mac:~/s/ompi3 ❯❯❯ svnversion . >>>>> 28688 >>>>> [10:02] jsquyres-mac:~/s/ompi3 ❯❯❯ svn info >>>>> opal/mca/backtrace/configure.m4 >>>>> Path: opal/mca/backtrace/configure.m4 >>>>> Name: configure.m4 >>>>> Working Copy Root Path: /Users/jsquyres/dev/svn/ompi3 >>>>> URL: >>>>> https://svn.open-mpi.org/svn/ompi/trunk/opal/mca/backtrace/configu >>>>> re.m4 Repository Root: https://svn.open-mpi.org/svn/ompi >>>>> Repository UUID: 63e3feb5-37d5-0310-a306-e8a459e722fe >>>>> Revision: 28688 >>>>> Node Kind: file >>>>> Schedule: normal >>>>> Last Changed Author: rhc >>>>> Last Changed Rev: 23764 >>>>> Last Changed Date: 2010-09-17 19:04:06 -0400 (Fri, 17 Sep 2010) >>>>> Text Last Updated: 2013-05-24 11:39:52 -0400 (Fri, 24 May 2013) >>>>> Checksum: a6d3741b6c9ab47daf2a6af6c812c148f91793a2 >>>>> >>>>> >>>>> >>>>> On Jul 1, 2013, at 9:58 AM, Vasiliy >>>>> wrote: >>>>> >>>>>> Hello, >>>>>> >>>>>> There is an error while configuring OpenMPI from the svn checkout >>>>>> with aclocal not being able to find >>>>>> 'opal/mca/backtrace/configure.m4', >>>>>> which, in fact, does exist there. What changes are needed to fix that? >>>>>> >>>>>> Note: it has stepped in the 'opal/libltdl' directory just before >>>>>> that >>>>>> error: >>>>>> >>>>>> *** GNU libltdl setup >>>>>> checking location of libltdl... internal copy >>>>>> configure: OMPI configuring in opal/libltdl >>>>>> configure: running /bin/sh >>>>>> >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0/opal/libltdl/configure' >>>>>> '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' >>>>>> '--sbindir=/usr/sbin' '--libexecdir=/usr/lib' '--datadir=/usr/share' >>>>>> '--localstatedir=/var' '--sysconfdir=/etc' '--datarootdir=/usr/share' >>>>>> '--docdir=/usr/share/doc/openmpi' >>>>>> 'LDFLAGS=-Wl,--export-all-symbols -Wl,-no-undefined' '--disable-mca-dso' >>>>>> '--disable-sysv-shmem' >>>>>> '--without-udapl' '--enable-cxx-exceptions' '--with-threads=posix' >>>>>> '--without-cs-fs' '--enable-heterogeneous' >>>>>> '--with-mpi-param_check=always' >>>>>> '--enable-contrib-no-build=vt,libompitrace' >>>>>> >>>>>> '--enable-mca-no-build=paffinity,installdirs-windows,timer-windows,shmem-sysv' >>>>>> 'CC=gcc' 'CFLAGS=-ggdb -march=native -mtune=native -Ofast >>>>>> -fomit-frame-pointer -pipe >>>>>> >>>>>> -fdebug-prefix-map=/usr/src/64bit/release/openmpi/openmpi-1.9.0-a >>>>>> 1/build=/usr/src/debug/openmpi-1.9.0-a1 >>>>>> >>>>>> -fdebug-prefix-map=/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0=/usr/src/debug/openmpi-1.9.0-a1' >>>>>> 'LIBS=' 'CPPFLAGS=' 'CXX=g++' 'CXXFLAGS=-ggdb -march=native >>>>>> -mtune=native -Ofast -fomit-frame-pointer -pipe >>>>>> >>>>>> -fdebug-prefix-map=/usr/src/64bit/release/openmpi/openmpi-1.9.0-a >>>>>> 1/build=/usr/src/debug/openmpi-1.9.0-a1 >>>>>> >>>>>> -fdebug-prefix-map=/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0=/usr/src/debug/openmpi-1.9.0-a1' >>>>>> 'FC=gfortran' 'FCFLAGS=-ggdb -march=native -mtune=native -Ofast >>>>>> -fomit-frame-pointer -pipe >>>>>> >>>>>> -fdebug-prefix-map=/usr/src/64bit/release/openmpi/openmpi-1.9.0-a >>>>>> 1/build=/usr/src/debug/openmpi-1.9.0-a1 >>>>>> >>>>>> -fdebug-prefix-map=/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0=/usr/src/debug/openmpi-1.9.0-a1' >>>>>> --enable-ltdl-convenience --disable-ltdl-install --enable-shared >>>>>> --disable-static --cache-file=/dev/null >>>>>> >>>>>> --srcdir=/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/open >>>>>> mpi-1.9.0/opal/libltdl >>>>>> --disable-option-checking >>>>>> checking for a BSD-compatible install... /usr/bin/install -c >>>>>> <stripped> >>>>>> >>>>>> *** Final output >>>>>> checking that generated files are newer than configure... done >>>>>> <stripped> >>>>>> >>>>>> config.status: executing libtool commands Making all in config >>>>>> make[1]: Entering directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/config' >>>>>> make[1]: Nothing to be done for 'all'. >>>>>> make[1]: Leaving directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/config' >>>>>> Making all in contrib >>>>>> make[1]: Entering directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/contrib' >>>>>> make[1]: Nothing to be done for 'all'. >>>>>> make[1]: Leaving directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/contrib' >>>>>> Making all in opal >>>>>> make[1]: Entering directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/opal' >>>>>> Making all in include >>>>>> make[2]: Entering directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/opal/include' >>>>>> make all-am >>>>>> make[3]: Entering directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/opal/include' >>>>>> make[3]: Leaving directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/opal/include' >>>>>> make[2]: Leaving directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/opal/include' >>>>>> Making all in libltdl >>>>>> make[2]: Entering directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/opal/libltdl' >>>>>> CDPATH="${ZSH_VERSION+.}:" && cd >>>>>> >>>>>> /usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0 >>>>>> /opal/libltdl >>>>>> && /bin/sh >>>>>> /usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0 >>>>>> /config/missing >>>>>> aclocal-1.14 -I ../../config >>>>>> aclocal-1.14: error: ../../config/autogen_found_items.m4:274: >>>>>> file 'opal/mca/backtrace/configure.m4' does not exist >>>>>> Makefile:527: recipe for target >>>>>> >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9.0/opal/libltdl/aclocal.m4' >>>>>> failed >>>>>> make[2]: *** >>>>>> [/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/src/openmpi-1.9. >>>>>> 0/opal/libltdl/aclocal.m4] >>>>>> Error 1 >>>>>> make[2]: Leaving directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/opal/libltdl' >>>>>> Makefile:2070: recipe for target 'all-recursive' failed >>>>>> make[1]: *** [all-recursive] Error 1 >>>>>> make[1]: Leaving directory >>>>>> '/usr/src/64bit/release/openmpi/openmpi-1.9.0-a1/build/opal' >>>>>> Makefile:1578: recipe for target 'all-recursive' failed >>>>>> make: *** [all-recursive] Error 1 >>>>>> *** ERROR: make failed >>>>>> _______________________________________________ >>>>>> devel mailing list >>>>>> de...@open-mpi.org >>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/devel >>>>> >>>>> >>>>> -- >>>>> Jeff Squyres >>>>> jsquy...@cisco.com >>>>> For corporate legal information go to: >>>>> http://www.cisco.com/web/about/doing_business/legal/cri/ >>>>> >>>>> >>>>> _______________________________________________ >>>>> devel mailing list >>>>> de...@open-mpi.org >>>>> http://www.open-mpi.org/mailman/listinfo.cgi/devel >>>> >>>> >>>> _______________________________________________ >>>> devel mailing list >>>> de...@open-mpi.org >>>> http://www.open-mpi.org/mailman/listinfo.cgi/devel >> >> >> _______________________________________________ >> devel mailing list >> de...@open-mpi.org >> http://www.open-mpi.org/mailman/listinfo.cgi/devel > > > -- > Jeff Squyres > jsquy...@cisco.com > For corporate legal information go to: > http://www.cisco.com/web/about/doing_business/legal/cri/ > _______________________________________________ devel mailing list de...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/devel
