Ralph, Building with gcc-4.1.2 fixed the problem for me. I also removed an old install of ompi-1.4 that was in LD_LIBRARY_PATH at build time and might have been a contributing factor. If I'd known earlier that it was there, I wouldn't have reported the problem without first removing it.
I can build again with gcc-4.0.0 and --enable-debug if you are still interested in trying to get a line number. This would also determine if LD_LIBRARY_PATH was the true culprit. -Paul [Sent from my phone] On Jan 8, 2014 8:02 PM, "Ralph Castain" <r...@open-mpi.org> wrote: > Most likely problem is a bad backing store site - any chance you could > give me a line number from this? There are a lot of calls to register > params in that code and I'd need some help in figuring out which one wasn't > right. > > > On Jan 8, 2014, at 6:59 PM, Paul Hargrove <phhargr...@lbl.gov> wrote: > > I am still testing the current 1.7.4rc tarball on my various systems. The > latest failure (shown below) is a SEGV somewhere below MPI_Init on a old, > but otherwise fairly normal, Linux/x86 (32-bit) system. > > $ /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/bin/mpirun > -np 1 examples/ring_c > [pcp-j-6:29031] *** Process received signal *** > [pcp-j-6:29031] Signal: Segmentation fault (11) > [pcp-j-6:29031] Signal code: Address not mapped (1) > [pcp-j-6:29031] Failing at address: 0x6c6c6f63 > [pcp-j-6:29031] [ 0] [0xbe4440] > [pcp-j-6:29031] [ 1] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libopen-pal.so.6(mca_base_var_enum_create+0x15d) > [0x2b11ed] > [pcp-j-6:29031] [ 2] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/openmpi/mca_coll_ml.so(mca_coll_ml_register_params+0x639) > [0x440909] > [pcp-j-6:29031] [ 3] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libopen-pal.so.6(mca_base_framework_components_register+0x14e) > [0x2b2cce] > [pcp-j-6:29031] [ 4] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libopen-pal.so.6(mca_base_framework_register+0x1b5) > [0x2b32a5] > [pcp-j-6:29031] [ 5] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libopen-pal.so.6(mca_base_framework_open+0x4e) > [0x2b333e] > [pcp-j-6:29031] [ 6] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libmpi.so.1(ompi_mpi_init+0x53d) > [0xaf359d] > [pcp-j-6:29031] [ 7] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libmpi.so.1(MPI_Init+0x13d) > [0xb10d6d] > [pcp-j-6:29031] [ 8] examples/ring_c [0x80486e9] > [pcp-j-6:29031] [ 9] /lib/libc.so.6(__libc_start_main+0xdc) [0x125ebc] > [pcp-j-6:29031] [10] examples/ring_c [0x8048631] > [pcp-j-6:29031] *** End of error message *** > -------------------------------------------------------------------------- > mpirun noticed that process rank 0 with PID 29031 on node pcp-j-6 exited > on signal 11 (Segmentation fault). > -------------------------------------------------------------------------- > > The failure shown is for a singleton run, but np=2 fails as well. > > System info: > $ uname -a > Linux pcp-j-6 2.6.18-238.1.1.el5PAE #1 SMP Tue Jan 18 19:28:42 EST 2011 > i686 athlon i386 GNU/Linux > $ gcc --version > gcc (GCC) 4.0.0 > Copyright (C) 2005 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > The only configure argument used was --prefix. > > I was going to attach output from "ompi_info --all", but it SEGV's too! > > $ ompi_info --all > [pcp-j-6:29092] *** Process received signal *** > [pcp-j-6:29092] Signal: Segmentation fault (11) > [pcp-j-6:29092] Signal code: Address not mapped (1) > [pcp-j-6:29092] Failing at address: 0x6c6c6f63 > [pcp-j-6:29092] [ 0] [0xd8a440] > [pcp-j-6:29092] [ 1] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libopen-pal.so.6(mca_base_var_enum_create+0x15d) > [0x2db1ed] > [pcp-j-6:29092] [ 2] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/openmpi/mca_coll_ml.so(mca_coll_ml_register_params+0x639) > [0x48d909] > [pcp-j-6:29092] [ 3] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libopen-pal.so.6(mca_base_framework_components_register+0x14e) > [0x2dccce] > [pcp-j-6:29092] [ 4] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libopen-pal.so.6(mca_base_framework_register+0x1b5) > [0x2dd2a5] > [pcp-j-6:29092] [ 5] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libopen-pal.so.6(opal_info_register_project_frameworks+0x57) > [0x2b83d7] > [pcp-j-6:29092] [ 6] > /home/pcp1/phargrov/OMPI/openmpi-1.7-latest-linux-x86/INST/lib/libmpi.so.1(ompi_info_register_framework_params+0x81) > [0xa69251] > [pcp-j-6:29092] [ 7] ompi_info(main+0x2ba) [0x8049a2a] > [pcp-j-6:29092] [ 8] /lib/libc.so.6(__libc_start_main+0xdc) [0x125ebc] > [pcp-j-6:29092] [ 9] ompi_info [0x80496e1] > [pcp-j-6:29092] *** End of error message *** > Segmentation fault (core dumped) > > I will try again with a newer gcc and report back. > > -Paul > > -- > Paul H. Hargrove phhargr...@lbl.gov > Future Technologies Group > Computer and Data Sciences Department Tel: +1-510-495-2352 > Lawrence Berkeley National Laboratory Fax: +1-510-486-6900 > _______________________________________________ > devel mailing list > de...@open-mpi.org > http://www.open-mpi.org/mailman/listinfo.cgi/devel > > > > _______________________________________________ > devel mailing list > de...@open-mpi.org > http://www.open-mpi.org/mailman/listinfo.cgi/devel >
