Hi Ray, On Thu, Apr 19, 2012 at 11:53 AM, Ray Gibson <[email protected]> wrote: > Hello, > > Sorry for the cross post; I accidentally sent this to the openwrt devel list > first... > > I've just spent the last few hours reading many threads in the archives from > this list. I'm hoping someone may be able to help me, else I think I have a > batch of bad radios. > > Summary: hardware is two identical routerstation pros running OpenWRT > bleeding edge from 2012-03-14 (with a compat-wireless from february I > believe). SR71-A (ath9k) radio in each. > > I'm bringing up the interfaces in each like this: > > iw phy0 interface add wlan0 type mp > iw phy0 set channel 36 HT40+ > iw wlan0 set meshid TheMeshID > ifconfig wlan0 up > brctl addif br-lan wlan0 > > Running iperf in either direction produces a range of 13-16 Mbits/sec when I > can point to countless examples in the mailing list archives that show > people getting significantly higher bandwidth. > > While pushing my test through, an `iw dev wlan0 station dump` on either node > often shows the bitrates at: > > 300.0 MBit/s MCS 15 40Mhz short GI > > I'm getting similar, if not poorer results on higher 5ghz channels (149+, > 157+). Am I horribly misconfiguring something or is it my hardware? My > antennas are 3x3 panels spaced about 10 meters apart.
Are your antennas 5ghz compatible? :P _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
