Hi Yeoh, Today we were trying to set the multicast rate which you recently implemented. So far, no luck:
$ iw mesh0 mesh join bazooka mcast-rate 54 $ iperf -u -c 225.0.0.1 ------------------------------------------------------------ Client connecting to 225.0.0.1, UDP port 5001 Sending 1470 byte datagrams Setting multicast TTL to 1 UDP buffer size: 124 KByte (default) ------------------------------------------------------------ [ 3] local 10.14.92.18 port 56541 connected with 225.0.0.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 903 KBytes 738 Kbits/sec [ 3] Sent 629 datagrams Sniffer confirms only 1 Mbps data rate is used. Diving through the code the implements this, it appears that this is dependent on the rate control. What rate control algorithm did you test this setting on? Thanks, Javier -- Javier Cardona cozybit Inc. http://www.cozybit.com _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
