On 2012-07-19 09:10 +0800, Yeoh Chun-Yeow wrote [email protected]:
rate control is minstrel_ht on both side,
rc_stats from one node is somehow all null:
type rate throughput ewma prob this prob this succ/attempt
success attempts
HT20/LGI TtPMCS0 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS1 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS2 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS3 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS4 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS5 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS6 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS7 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS8 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS9 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS10 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS11 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS12 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS13 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS14 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS15 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS0 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS1 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS2 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS3 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS4 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS5 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS6 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS7 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS8 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS9 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS10 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS11 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS12 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS13 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS14 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS15 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS0 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS1 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS2 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS3 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS4 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS5 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS6 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS7 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS8 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS9 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS10 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS11 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS12 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS13 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS14 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS15 0.0 0.0 0.0 0( 0) 0
0
Total packet count:: ideal 0 lookaround 0
Average A-MPDU length: 1.0
from another:
type rate throughput ewma prob this prob this succ/attempt
success attempts
HT20/LGI t MCS0 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS1 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS2 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS3 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS4 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS5 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS6 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI T PMCS7 39.0 100.0 100.0 1( 1) 1
1
HT20/LGI MCS8 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS9 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS10 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS11 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS12 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS13 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS14 0.0 0.0 0.0 0( 0) 0
0
HT20/LGI MCS15 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS0 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS1 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS2 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS3 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS4 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS5 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS6 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS7 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS8 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS9 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS10 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS11 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS12 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS13 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS14 0.0 0.0 0.0 0( 0) 0
0
HT40/LGI MCS15 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS0 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS1 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS2 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS3 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS4 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS5 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS6 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS7 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS8 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS9 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS10 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS11 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS12 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS13 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS14 0.0 0.0 0.0 0( 0) 0
0
HT40/SGI MCS15 0.0 0.0 0.0 0( 0) 0
0
Total packet count:: ideal 0 lookaround 1
Average A-MPDU length: 1.0
YC>How about the rate control algorithm statistic for that particular
YC>station that you communicate with "rc_stats"?
YC>
YC>Regards,
YC>Chun-Yeow
YC>
YC>On Thu, Jul 19, 2012 at 9:06 AM, Georgiewskiy Yuriy
YC><[email protected]> wrote:
YC>> On 2012-07-19 09:04 +0800, Yeoh Chun-Yeow wrote [email protected]:
YC>>
YC>> iw phy phy0 interface add mp0 type mp
YC>> ifconfig mp0 hw ether 00:21:a4:35:36:24
YC>> iw dev mp0 set meshid Mesh
YC>> iw dev mp0 set channel 7 HT40+
YC>>
YC>> all this before bring interface up.
YC>>
YC>> YC>Hi, Georgiewskiy
YC>> YC>
YC>> YC>It will be good if you provide the "iw" command that you use for
YC>> YC>setting out the mesh nodes.
YC>> YC>
YC>> YC>Regards,
YC>> YC>Chun-Yeow
YC>> YC>_______________________________________________
YC>> YC>Devel mailing list
YC>> YC>[email protected]
YC>> YC>http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
YC>> YC>
YC>>
YC>> C уважением With Best Regards
YC>> Георгиевский Юрий. Georgiewskiy Yuriy
YC>> +7 4872 711666 +7 4872 711666
YC>> факс +7 4872 711143 fax +7 4872 711143
YC>> Компания ООО "Ай Ти Сервис" IT Service Ltd
YC>> http://nkoort.ru http://nkoort.ru
YC>> JID: [email protected] JID: [email protected]
YC>> YG129-RIPE YG129-RIPE
YC>> _______________________________________________
YC>> Devel mailing list
YC>> [email protected]
YC>> http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
YC>>
YC>_______________________________________________
YC>Devel mailing list
YC>[email protected]
YC>http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
YC>
C уважением With Best Regards
Георгиевский Юрий. Georgiewskiy Yuriy
+7 4872 711666 +7 4872 711666
факс +7 4872 711143 fax +7 4872 711143
Компания ООО "Ай Ти Сервис" IT Service Ltd
http://nkoort.ru http://nkoort.ru
JID: [email protected] JID: [email protected]
YG129-RIPE YG129-RIPE_______________________________________________
Devel mailing list
[email protected]
http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
