No after a reboot the units show the same errors.
On Tuesday, September 11, 2012, Yeoh Chun-Yeow <[email protected]> wrote: > If you restart both nodes, working? > > ---- > Chun-Yeow > > On Tue, Sep 11, 2012 at 11:44 PM, fred veldini <[email protected]> wrote: >> I'm using ath9k for this testing. >> >> I have different routers running ath5k and ath9k for test units. >> >> Fred >> >> >> >> >> On Tue, Sep 11, 2012 at 1:42 AM, Yeoh Chun-Yeow <[email protected]> >> wrote: >>> >>> Hi, Fred >>> >>> The previous patch only affects the ath5k. >>> >>> Are you using ath5k or ath9k in your case? >>> >>> --- >>> Chun-Yeow >>> >>> On Tue, Sep 11, 2012 at 1:08 PM, fred veldini <[email protected]> >>> wrote: >>> > Sorry to get back to everyone late. >>> > >>> > I have been testing the patch from Yeoh Chun-Yeow and have come up with >>> > some >>> > weird issues. Maybe some could shed some lite on. >>> > >>> > I have two nodes running ath9k with Authsae. >>> > I have tested this on multiple Atheros cards and the results are the >>> > same. >>> > >>> > Node one comes up without an issue and node two comes up without an >>> > issue. >>> > >>> > The connect secure for about 5 seconds then randomly one of the nodes >>> > dumps >>> > this error >>> > >>> > >>> > Mesh plink: incorrect plink ie length 3 6 >>> > >>> > But the iw dev station dump shows ESTAB >>> > >>> > The other node keep showing >>> > new unauthed sta (seq num=1347339621) >>> > NL80211_CMD_NEW_STATION (1347339931.189520) >>> > NL80211_CMD_NEW_PEER_CANDIDATE(1347339951.669387) >>> > new unauthed sta (seq num=1347339622) >>> > NL80211_CMD_NEW_STATION (1347339951.670386) >>> > NL80211_CMD_NEW_PEER_CANDIDATE(1347339972.150253) >>> > new unauthed sta (seq num=1347339623) >>> > NL80211_CMD_NEW_STATION (1347339972.151252) >>> > >>> > Constantly but the iw dev station dump show LISTEN >>> > >>> > It doesnt matter if I use HT40/HT20 or none of them - the same results. >>> > >>> > Has anyone run into this before? >>> > >>> > Thanks >>> > >>> > Fred >>> > >>> > >>> > >>> > On Mon, Sep 3, 2012 at 2:10 AM, fred veldini <[email protected]> >>> > wrote: >>> >> >>> >> I will apply this patch and test it out. I should have some feed back >>> >> when >>> >> I get back in town at the end of this week. >>> >> >>> >> Fred >>> >> >>> >> >>> >> On Sun, Sep 2, 2012 at 10:04 PM, Yeoh Chun-Yeow >>> >> <[email protected]> >>> >> wrote: >>> >>> >>> >>> Hi, Fred >>> >>> >>> >>> Are you able to try out this patch and see how: >>> >>> http://www.spinics.net/lists/linux-wireless/msg95993.html >>> >>> >>> >>> Regards, >>> >>> Chun-Yeow >>> >>> >>> >>> On Mon, Sep 3, 2012 at 7:56 AM, fred veldini <[email protected] > >>> >>> wrote: >>> >>> > AUTHSAE Not allowing traffic over a mesh link. >>> >>> > >>> >>> > I Thought I had this working a while ago when Thomas created a patch >>> >>> > for the >>> >>> > rate settings on a basic radio card. >>> >>> > But after extensive testing and modifying my startup script I >>> >>> > realize >>> >>> > the >>> >>> > encryption portion was not working. >>> >>> > >>> >>> > I had a interface up/down setup
_______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
