I have used the TL-WN727N USB adapter which uses rt2800usb driver and confirm that mesh is working.
Perhaps, you can try the latest compat-wireless. -- Chun-Yeow On Thu, Dec 20, 2012 at 7:37 AM, Thomas Pedersen <[email protected]> wrote: > On Wed, Dec 19, 2012 at 12:57 PM, Nelson Terra <[email protected]> wrote: >> Hello all, >> >> I am trying to configure a open mesh network with iw and using this howto: >> >> https://github.com/cozybit/open80211s/wiki/HOWTO >> >> I am using Debian Wheezy with kernel 3.2.0, and a usb wireless adaptor dlink >> dwa-125 which in this link >> >> http://linuxwireless.org/en/users/Devices/USB >> >> says it uses rt2800usb driver, and according to iw list it is capable of >> mesh point interface mode. >> >> I am following all the steps for open mesh setup but when I run the command >> >> iw dev $MESH_IFACE station dump >> >> I get nothing, any output, and nodes can't ping each other. > > Even though the driver may advertise mesh mode support, it sounds like > this broke recently. Likely they aren't even beaconing. Maybe the > fastest way to narrow this down is check out a copy of the 3.2.0 > sources and look at 'git log drivers/net/wireless/rt2x00' for any > interesting commits. > > Thomas > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
