Hi Ross, On Tue, Jan 15, 2013 at 5:49 PM, Ross Wakelin <[email protected]> wrote: > > Just to let you know.. > > I have been using 11s and authsae for the last couple of months. I have been > manually patching the make files to get a working build from trunk > Attitude Adjustment. > I use tplink wdr-4300 devices, with the mesh on the 802.11a band, and I can > successfully get authenticated meshes set up. Link speed regularly ticks > along > at about 100Mb/s indicated, with bursts up over 300Mb/s when the load goes up. > The mesh is used to support VoIP and video cameras, with a typical mesh having > six to eight nodes, with a couple of those being pure, in the middle, > relay nodes. > The mesh architecture has one internet gateway, and each mesh node > supports a class C network behind it, so for example the mesh node > 10.3.2.12 has the network 10.2.12.0/24 behind it. Each node is a > "mesh gateway" but I couldn't get the o11s gateway/portal stuff to > work, so I run OLSR across the top of the mesh to handle the routing.
Cool! Glad to hear someone is actually using this :) About the mesh gateway: did you try simply bridging the mesh "gateway" interface with the exit interface? AFAIK this should work. Thomas _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
