Hi, Cedric As far as I know, I have not set the channel or HT mode using the iw. The phy mode and channel are based on the configuration file in authsae.cfg. (from authsae.sample.cfg in config folder).
So it would be: /sbin/wifi down iw phy0 interface add mesh0 type mp ifconfig mesh0 up mesh-nl80211 -c /etc/authsae.cfg Am I understand you correctly? ---- Chun-Yeow On Thu, Apr 18, 2013 at 8:34 PM, voncken <[email protected]> wrote: > I think which I have understood why you don't have the crash > If you do > I run wifi down (to delete all wifi iface) I run > iw phy0 interface add wlan0 type mp > ifconfig wlan0 up > meshd-nl80211 -c /etc/meshd.cfg > > with meshd-nl80211 before commit > 1e85e41d1b70b10a67cdf438b8894f24076e2743, the HT mode is not enable with > this sequence. > > Before this commit the correct sequence is > iw phy0 interface add wlan0 type mp > iw wlan0 set channel 36 HT20 > ifconfig wlan0 up > meshd-nl80211 -c /etc/meshd.cfg > > Sorry for my mistake > To fix this crash I have sent a patch yestarday on the linux wireless > maillin list. > > Could you confirm the crash and the fix ? > > Cedric Voncken > > > -----Message d'origine----- > De : [email protected] > [mailto:[email protected]] De la part de voncken > Envoyé : mardi 16 avril 2013 09:55 > À : [email protected] > Objet : RE: Authsae + htmode crash > > I power up my first device, > I run wifi down (to delete all wifi iface) I run > iw phy0 interface add wlan0 type mp > ifconfig wlan0 up > meshd-nl80211 -c /etc/meshd.cfg > I repeat the same sequence on the second product, and the second product > reboot because a kernel panic occurred. > In my first mail, I have posted my config file. > Have you the same default? > > Cedric Voncken > > De : [email protected] > [mailto:[email protected]] De la part de Yeoh Chun-Yeow > Envoyé : mardi 16 avril 2013 02:35 À : [email protected] Objet : > Re: Authsae + htmode crash > > > I understand why the HT mode is not set by meshd. It cannot set the channel > information when the interface has joined a mesh network. > The interface join the mesh network automatically, if the mesh_id is set in > 'iw $phy interface add' command (during ifconfig $ifname up process). > > I suggest that you disable the radio first by setting "disabled" to 1. Then > only executing the command. Don't put the mesh_id at the back of interface > as what done by the mac80211.sh. > > --- > Chun-Yeow > > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel > >
_______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
