Hi Yeoh, Thanks. That makes sense. I am under impression that the beacon interval for mesh is also 100ms. Ok, i will change that to 100ms to see if the problem disappear. By the way, do you know why it is defaulted to 1000ms instead of normal 100ms?.
Rgds, Zaki. On Mon, Apr 29, 2013 at 11:56 AM, Yeoh Chun-Yeow <[email protected]>wrote: > > 1) The beacon detection (beeps on the device) is very random interval and >> most of its interval is almost around 1 sec each. Sometimes a long pause >> between the beeps. >> > The beacon interval for mesh beacon generation is 1000ms or 1s. > > >> 2) 2.4G and 5G are having the same behaviour. >> 3) When i tuned the Fluke to detect my normal AP, the beeps are >> consistently in a very fast interval. No pause at all in between. >> > The beacon interval for AP beacon generation is 100ms. > > So, IMHO, probably the loss may due to congestion or collision. > > --- > Chun-Yeow > > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel > >
_______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
