Hi, I've been testing the implementation for several months with many tests, and I tell you some of my strange results that I've checked repeated, may be you have an answer to them, or a solution.
1: Two nodes, in the same room, working in a quiet radio environment. I sniff all the traffic with a laptop and kismet. I noticed many times in the connection stablishment phase, that a node A sends to another node, three or four times "Mesh peering open", and the other node answers with an ack to each one MPO, later, node A sends a "The mesh STA has resent dot11MeshMax retries Mesh Peering messages...without a mesh pering confirm", 100ms later node B send a "Mesh peering open", an both nodes stablish the connection properly. ¿Why node B does't answer to the first 4 messages? 2 Another strange behavior that is repeated many times in my tests. A network with 4 nodes in line A-B-C-D (A only has a B peer..., B has A and C as peers...), working in UDP, I check firstly from node A to the rest of nodes that BW is normal, with max of 15 Mbps. I send udp iperf of 5 Mbps from A to C without any problem checking with a 3 seconds interval., at the moment I start a simultaneous new transfer form B to D of 5 Mbps, the first transfer decrease to 20Kbps, and transfer from B to D goes without any problem. At the moment that transfer form B to D stops,the bad trasfer from A to C goes up to almost 5 Mbps. I've changed the HW, the machines, the OS, every time is the same. In another test, one trasfer A to D and another B to C, the low BW affects to A-D trasfer. ¿any idea? ¿SW problem? My HW is Dlink DWL-G122, CompatW 3.6 , IW 3.6. Ubuntu on PC machine. Do you checked the same? cheers, David
_______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
