Hi Bill What is the network configuration? I think you bridge mesh and ap ifaces... Il giorno 13/mag/2013 20:17, "Bill" <[email protected]> ha scritto:
> Bob- > > Yes, the exact configuration would be useful, but there's the rub. > > The configuration is pretty simple: it's the (current) final release of > OpenWRT "Attitude Adjustment" running on a Ubiquiti PicoStation 2HP. > There's an Ethernet port and two VAPs: one a regular Access Point, one a > mesh access point. > > I have this configuration running in four different places (including my > own home), and it fails in two. In the other two locations, it runs > perfectly - "free" always reports the same number (more or less). > > In the two places it is failing, it is only the "stand-alone" node that > fails - the one connected to the router works fine. > > On the node to which I have ssh access, I can see that it takes about 7-8 > hours to fail. There is very little WiFi interference and no one connects > to it (it's out on the back of a barn, strictly for stability testing). > > On the other node (it's in a different network in a different location, > BTW), it is in a very congested area, with many WiFi APs around, and it is > being heavily used. > > This is the wireless config in OpenWRT: > > config wifi-device radio0 > option type mac80211 > option channel 10 > option phy phy0 > option hwmode 11g > > config wifi-iface > option device radio0 > option network lan > option mode ap > option ssid 'AccessPoint' > option encryption mixed-psk > option key Password > > config wifi-iface > option device radio0 > option network lan > option mode mesh > option disabled 1 > option mesh_id mesh_id > > I'm not quite sure where to go with this from here. If I could get it to > fail consistently here, I could probably come up with a way to debug it > (serial port, etc.) But it only fails in places where I can't get my hands > on the radios. > > I am REALLY open to ideas here... > > Thanks, > > -- > Bill Moffitt > > ______________________________**_________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/**cgi-bin/mailman/listinfo/devel<http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel> >
_______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
