Hi Chun Yeow,
>> Actually, we are configuring the 3 interfaces into 3 different networks and
>> bridge with 3 virtual WLAN interface (such as VLANs).
>So, you mean each PHY interfaces has 6 virtual interfaces, 3 for mesh
>and 3 for AP/STA mode?
In our device, we have 2 physical interfaces. 1 of it we configure it to
braoadcast 3 different SSIDs (AP), and configured another physical module to
broadcast 3 different mesh IDs.
Then we bridge 1 AP virtual interface to a mesh virtual interface to create a
network.
>> Do you agree on this kind of configuration?
>I cannot be 100% sure, but I am wondering is that any benefit of
>setting up this configuration. Did you ever consider multiple-radio
>approach, Thomas has submitted the patches before?
We have a limitation on our device, where there are only two wifi modules. We
are investigating on using the minimum physical interfaces to create a maximum
number of networks.
It some how like VLAN in ethernet netwrok.
Thanks,
Ming Ann
_______________________________________________
Devel mailing list
[email protected]
http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
