[please don't use HTML-formatted mail. I removed all the tags] On Mon, Jul 14, 2014 at 11:44:31AM -0400, François Gervais wrote: > Let say I have a station on mesh MESHID. When I issue the "mesh join" > command on another station I see this station sending a "Mesh Peering > Open" to the other station on MESHID.
> How does my new station know about the other station already? I'm > thinking I should see a broadcast first so the station joining the mesh > can enumerate the one already part of the mesh. Is it something I can't > see through wireshark? Usually, station B gets a beacon from station A and then sends the POPEN frame to A. You should be able to see it on a monitor interface, depending on the device and how you have it set up. See: http://wireless.kernel.org/en/users/Documentation/iw?highlight=%28monitor%29#Adding_interfaces_with_iw I often run a monitor on a third station just so I know that what I see is what is going over the air. -- Bob Copeland %% www.bobcopeland.com _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
